Tag: M.W=200-300

Reference of 13301-04-7,Some common heterocyclic compound, 13301-04-7, name is Methyl 3,6-dibromopyrazine-2-carboxylate, molecular formula is C6H4Br2N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General Procedures:Synthesis of compound (B) as described in the general reaction scheme; 3 ,6-dibromo-pyrazine-2- carboxylic acid.[00248] LiOH (655mg, 27mmol) is added to a solution of methyl-3-amino-2-pyrazine carboxylate (A) (J. Med. Chem. 1969, 12, 285-87) (2.7g, 9mmol) in THF:water:MeOH (18:4.5:4.5mL).The reaction is stirred at 50C for 30min, concentrated in vacuo, taken up in DCM and washed with IN HCl. The organic phase is dried over MgSO4 and concentrated in vacuo to afford compound (B). 1H NMR (250MHz, CDCl3) delta(ppm)8.70(lH, s).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 3,6-dibromopyrazine-2-carboxylate, its application will become more common.

Reference:
Patent; GALAPAGOS N.V.; WO2007/131991; (2007); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 1458-16-8, These common heterocyclic compound, 1458-16-8, name is Methyl 3-amino-6-iodopyrazine-2-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

30 ml of ammonia in water is added under magnetic stirring to 15 g (53.8 mmol) of a solution of methyl 3-amino-6-iodopyrazine-2-carboxylate in 150 ml of methanol. The reaction medium is stirred at 25C for 48 hours. After evaporation of the solvents, the precipitate obtained is filtered, rinsed with water and then dried at 50C to yield 12.50 g of 3-amino-6-iodopyrazine-2-carboxamide (88%) in the form of a beige solid.LCMS (EI, m/z): (M+l) 265.021H NMR: 6H ppm (400 MHz, DMSO): 8.35 (1H, s, CHarom), 7.85 (1H, bs, H), 7.60 (3H, bs, NH), 3.25 (3H, s, CH3)

The synthetic route of 1458-16-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PIERRE FABRE MEDICAMENT; KALOUN, El Bachir; BEDJEGUELAL, Karim; RABOT, Remi; KRUCZYNSKI, Anna; SCHMITT, Philippe; PEREZ, Michel; RAHIER, Nicolas; WO2012/101239; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1379338-74-5, name is 5,7-Dichloropyrido[3,4-b]pyrazine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 5,7-Dichloropyrido[3,4-b]pyrazine

Intermediate 20: 1 ,1-Dimethylethyl (2S)-2-{r(7-chloropyridor3,4-6lpyrazin-5- yl)oxy1methyl)-4-morpholinecarboxylate; 1 , 1-Dimethylethyl (2S)-2-(hydroxymethyl)-4-morpholinecarboxylate (Preparation reference: WO 2009/071658) (586mg, 2.70mmol) was dissolved in N,N- Dimethylformamide (7ml_) and cooled in an ice bath to 5C under a nitrogen atmosphere. Sodium hydride 60% in mineral oil (162mg, 4.05mmol) was added portionwise over 15min. 5,7-dichloropyrido[3,4-b]pyrazine (647mg, 3.24mmol) was then added portionwise and the mixture stirred at 5C for 35min and quenched by addition of saturated aqueous ammonium chloride solution (20ml_). The solution was partitioned between ethyl acetate and water. The aqueous was re-extracted with ethyl acetate and the combined organic layers were washed with water, separated using a phase separation cartridge and the solvent removed to give a brown solid. The crude residue was dissolved in DCM and purified by silica chromatography eluting with a 12-62% ethyl acetate in petroleum ether gradient. The appropriate fractions were combined and the solvent was evaporated to give the title compound as a brown solid (917mg).LCMS (Method B): Rt = 1.12min, MH+ = 380.9

The synthetic route of 1379338-74-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GLAXO GROUP LIMITED; ATKINSON, Francis Louis; ATKINSON, Stephen John; BARKER, Michael David; DOUAULT, Clement; GARTON, Neil Stuart; LIDDLE, John; PATEL, Vipulkumar Kantibhai; PRESTON, Alexander G; SHIPLEY, Tracy Jane; WILSON, David Matthew; WATSON, Robert J; WO2012/123312; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 117103-53-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 117103-53-4, name is 2-Bromo-5-nitropyrazine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

Step 1. Preparation of 4-Methyl-5′-nitro-3,4,5,6-tetrahydro-2H-[1,2′]bipyrazinyl In a 15 mL argon dried microwave reaction vial, was added bromonitropyrazine (300 mg, 1.47 mmol., Eq: 1.00) and K2CO3 (264 mg, 1.91 mmol., Eq: 1.3) under argon to give a light yellow slurry. N-methylpiperazine (192 mg, 212 mul, 1.91 mmol, Eq: 1.3) was added dropwise and the reaction mixture became an orange yellow thick slurry. Heated to 70 C. in an oil bath for 1.5 hrs then stirred at room temperature overnight. The reaction mixture was diluted with dioxane (10 mL), filtered through a fitted funnel and washed with DCM (10 mL). The combined filtrate and washes were concentrated to dryness to give a yellow solid (328 mg, yield 89%) which was used directly in the next step.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromo-5-nitropyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Berthel, Steven Joseph; Billedeau, Roland Joseph; Brotherton-Pleiss, Christine E.; Firooznia, Fariborz; Gabriel, Stephen Deems; Han, Xiaochun; Hilgenkamp, Ramona; Jaime-Figueroa, Saul; Kocer, Buelent; Lopez-Tapia, Francisco Javier; Lou, Yan; Orzechowski, Lucja; Owens, Timothy D.; Tan, Jenny; Wovkulich, Peter Michael; US2012/40949; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 622392-04-5, name is 2-Bromo-5-iodopyrazine, This compound has unique chemical properties. The synthetic route is as follows., name: 2-Bromo-5-iodopyrazine

Into a 20-L 4-necked round-bottom flask was placed a solution of TEA (682.5 g, 6.74 mol) in 1, 4-dioxane (8.5 L) , dibromozinc (374.5 g, 1.69 mol) , tetrakis (triphenylphosphane) palladium (82.5 g, 71.39 mmol) , ethyl prop-2-ynoate (345 g, 3.52 mol) , and a solution of 2-bromo-5-iodopyrazine (400 g, 1.40 mol) in 1, 4-Dioxane (500 mL) . The resulting mixture was stirred for 10 min at 80 C, then diluted with 30 L of water/ice, and extracted with 2 x 10 L of ethyl acetate. The combined organic layers were dried in an oven under reduced pressure and concentrated under vacuum. The resulting residue was purified on a silica gel column with ethyl acetate/petroleum ether (1: 30) to provide the title compound.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 622392-04-5.

Reference:
Patent; MERCK SHARP & DOHME CORP.; DEBENHAM, John S.; COX, Jason M.; LAN, Ping; SUN, Zhongxiang; FENG, Zhe; SUN, Chunrui; SEGANISH, W. Michael; LAI, Zhong; ZHU, Chen; BARA, Thomas; RAJAGOPANALAN, Murali; DANG, Qun; KIM, Hyunjin M.; HU, Bin; HAO, Jinglai; (112 pag.)WO2018/107415; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 944709-42-6, A common heterocyclic compound, 944709-42-6, name is 6,8-Dibromo-[1,2,4]triazolo[1,5-a]pyrazine, molecular formula is C5H2Br2N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solu&et of 6,S-dlbrornci- [l,2,4J So[1,5-&yrathE (0.21 0.72] rtuuol, Ark Pliant) and 5- anth4th-1Herr]-an-Z3hJrE (0.12 g, 0.7?2 numi, Astatecl irue-PrOH (S ruL) was added DEA (0377 niL, 2.16 rtutvl). The nixthrr was heated to reflux for abat 24 k The resu1iir so]u&nwas cooled to it and filtered to give 8-((b-[L24kcc[LJvrath8- yVn&-45thkv&c?-JH-bo(bJ?zn?in-2(3Scv2e (0.15 g, 55percent) as a brtwn solid: ?H NMR (DM5 0-dEl) oe 9.62 (s, 1H), S.69 (s, lH 5S9 (s, 1H), 7.61-7.67 (ii,, 2H), 723(d, frS.4 H; 1H), 2.65 Qt, 1=6.4 H; 2H 2.07-2. 15 (m, 3H 1.23 (rr 1H).

The synthetic route of 944709-42-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ABBVIE INC.; ABBVIE PHARMACEUTICAL TRADING (SHANGHAI) CO., LTD.; FRIEDMAN, Michael M.; COX, Philip; FRANK, Kristine E.; HOEMANN, Michael Z.; OSUMA, Augustine; WILSON, Noel S.; XU, Xiangdong; WO2015/157955; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Some common heterocyclic compound, 1458-01-1, name is Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate, molecular formula is C6H7ClN4O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate

General procedure: Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate 2 (1 eq.) was combined with K2CO3 (10 eq.), the appropriate (het)aryl boronic acid (1.5 eq.) and Pd(PPh3)4 (5 mol%) in a two-neck round bottom flask. The flask was connected to a condenser and purged with nitrogen. A 4:1 mixture of anhydrous toluene: MeOH (60 mL) was added via syringe and the reaction mixture was heated at reflux for 0.5-18 h. The mixture was allowed to cool to room temperature and filtered through Celite (10 x 3 cm, eluting with 3 x 20 mL EtOAc). The filtrate was evaporated to dryness and the residue purified by silica gel flash column chromatography using EtOAc/pet spirit.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1458-01-1, its application will become more common.

Reference:
Article; Buckley, Benjamin J.; Majed, Hiwa; Aboelela, Ashraf; Minaei, Elahe; Jiang, Longguang; Fildes, Karen; Cheung, Chen-Yi; Johnson, Darren; Bachovchin, Daniel; Cook, Gregory M.; Huang, Mingdong; Ranson, Marie; Kelso, Michael J.; Bioorganic and Medicinal Chemistry Letters; vol. 29; 24; (2019);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 6966-01-4, name is Methyl 3-amino-6-bromopyrazine-2-carboxylate, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6966-01-4, Formula: C6H6BrN3O2

Step 2; A suspension of compound 2 (28.5 g, 120 mmol) in an aqueous solution of 48% HBr (120 mL) and acetic acid (30 mL) was cooled to 0 C., and then treated with a solution of bromine (18 mL, 336 mmol) in acetic acid (18 mL) over a period of 45 min. A solution of NaNO2 (8.28 g, 420 mmol) in water (15 ml) was added while maintaining the temperature at 0 C., stirring was continued for further 30 min. After completion of reaction (reaction progress was monitored by TLC), the excess bromine was quenched by the drop wise addition of 30% aqueous solution of NaHSO3 (180 mL). The resulting precipitate was filtered and purified by column chromatography on silica gel eluted with 10% ethyl acetate in hexane to afford compound 3 as a white crystalline solid (18 g, 49%). MS m/z (ES): 294 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 3-amino-6-bromopyrazine-2-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; de Vicente Fidalgo, Javier; Hermann, Johannes Cornelius; Lemoine, Remy; Li, Hongju; Lovey, Allen John; Sjogren, Eric Brian; Soth, Michael; US2011/59118; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

These common heterocyclic compound, 24241-18-7, name is 2-Amino-3,5-dibromopyrazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C4H3Br2N3

A 100-mL, three-neck flask was charged with 2-bromo-l,l-dimethoxyethane 4 (23.2 g (16 mL, 137.2 mmol) and aqueous HBr (47.6% HBr by wt, 8.8 mmol/mL, 6.6 mL, 58.8 mmol), and the reaction mixture was heated to reflux (55C) for 2 hours. The mixture was allowed to cool to 40C, and solid NaHCC3 was added in small portions, until evolution of gas ceased. The resulting suspension was filtered, under vacuum, into a 500-mL, three-neck flask, and the filter cake was washed with isopropanol (200 mL). Solid 3,5-dibromopyrazin-2-amine (3) (12.0 g, 47.2 mmol) was added into the isopropanol filtrate, and the reaction mixture was heated at reflux (78C) for 16 hours. The resulting suspension was cooled to room temperature, filtered, the cake was washed with cold isopropanol (100 mL), and then the cake was dried under vacuum. The cake was transferred into a three-neck flask, into which, water (200 mL) was added, followed by solid K2CC3, in small portions, until gas evolution ceased, after which the reaction was stirred for 30 minutes. The resulting precipitate was isolated by filtration, and washed with water (200 mL). The solid was dried at 50C, to constant weight, then dissolved in THF, filtered through a plug (celite, silica gel, and charcoal). The solvent was removed under vacuum, to give 12.0 g of the desired product (5) as a white solid at 99% purity, as determined by NMR and LC-MS. IH NMR (500 MHz, CDC13) delta 8.26 (s, IH), 7.84 (d, J = 1.0 Hz, IH), 7.78 (d, J = 1.1 Hz, IH); 13C NMR (126 MHz, CDC13) delta 136.93, 134.06, 120.29, 119.26, 115.78.

The synthetic route of 2-Amino-3,5-dibromopyrazine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DOW GLOBAL TECHNOLOGIES LLC; ROHM AND HAAS ELECTRONIC MATERIALS KOREA LTD.; ONDARI, Mark E.; WELSH, Dean M.; FROESE, Robert DJ; NA, Hong-Yeop; (38 pag.)WO2016/209895; (2016); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 24241-18-7, A common heterocyclic compound, 24241-18-7, name is 2-Amino-3,5-dibromopyrazine, molecular formula is C4H3Br2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-Amino-3,5-dibromopyrazine (10 g, 04 mol) was added to aqueous ammonia (50 ml) After heating to 110 C for 16 h, add ethyl acetate and HO The organic layer was separated, dried and concentrated to give the title compound

The synthetic route of 24241-18-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NANJING SHENGHE PHARMACEUTICAL CO., LTD.; WANG, YONG; ZHAO, LIWEN; LIU, YANG; ZHANG, JINGZHONG; WANG, DEZHONG; GAO, YIPING; CHEN, HONGYAN; ZHANG, CANG; ZHANG, DI; (68 pag.)TWI523856; (2016); B;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem