Tag: M.W=100-200

Electric Literature of 19847-12-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 19847-12-2, name is Pyrazinecarbonitrile belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To an oven dried rb flask with a magnetic stir bar were added 2-amiobenzamide 1a (136.0 mg, 1.0 mmol), nitrile derivative 2 (108.0 mg, 1.0 mmol), anhydrous zinc iodide (0.3 equiv, 96 mg) and the mixture were stirred in 5 mL acetonitrile for 1h at room temperature. Then iodine (51 mg, 0.2 mmol) and aq. TBHP (70% solution in water, 0.26 mL, 2.0 mmol) were added successively and the mixture stirred at rt for another 2 h. After completion of the reaction (TLC monitoring), the reaction mixture was quenched by aq. Na2S2O3 solution (5%, 20 mL), extracted with ethyl acetate (10 mL × 3), and the combined organic part was dried over anhydrous sodium sulphate. Removal of the solvent under reduced pressure left a crude mass which was purified by column chromatography using silica gel (25% EtOAc/hexane) to afford 3a (155 mg; 80% yield).

The synthetic route of Pyrazinecarbonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Article; Saha, Moumita; Das, Asish R.; Tetrahedron Letters; vol. 59; 26; (2018); p. 2520 – 2525;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Some common heterocyclic compound, 23688-89-3, name is 6-Chloropyrazine-2-carboxylic acid, molecular formula is C5H3ClN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C5H3ClN2O2

(R)-(2,2-dimethyl-1,3-dioxolan-4-yl)methanol (2.50 g, 18.93 mmol) was added to a room temperature suspension of NaH 60 wt% (833.0 mg, 20.82 mmol) in THF (50 mL). The reaction mixture was stirred at room temp for 30 min and a solution of 6-chloropyrazine-2-carboxylic acid (1.0 g, 6.31 mmol) in THF (20 mL) was added. The reaction mixture was stirred at room temp for 30 min then heated at reflux for 2 h. After cooling to room temp, the pH was adjusted to 3 by the addition of 3 N HCl (4 mL). The mixture was poured into brine and extracted with EtOAc. The combined organics were dried and concentrated. The crude product was recrystallized from pentane/EtOAc to give (R)-6-((2,2-dimethyl-1,3-dioxolan-4-yl)methoxy)pyrazine-2-carboxylic acid (764.0 mg, 48% yield). MS (ESI) calcd for C11Eta14Nu2O6(m/z): 254.09; found: 255 [M+H]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 23688-89-3, its application will become more common.

Reference:
Patent; SIRTRIS PHARMACEUTICALS, INC.; CASAUBON, Rebecca, L.; NARAYAN, Radha; OALMANN, Christopher; VU, Chi, B.; WO2013/59587; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 153800-11-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 153800-11-4 as follows.

(+)-((2R,3R,4S,5R,6S)-3-Acetoxy-6-(((3R,4R,5S)-5-azido-4-hydroxytetrahydro- 2//-pyran-3-yl)thio)-5-methoxy-4-(4-(3,4,5-trifluorophenyl)-li/-l,2,3-triazol-l- yl)tetrahydro-2 /-pyran-2-yl)methyl acetate (62 mg, 0.101 rnmol) and 2-ethynylpyrazine (16.75 mg, 0.161 mmol) were dissolved in a previously degassed solution of DMF (3 mL) and water (1.000 ml) and the mixture was placed under argon. Sodium ascorbate (23.90 mg, 0.121 mmol) and copper(II) sulfate pentahydrate (35.2 mg, 0.141 mmol) (predissolved in 0.5 rnL water) were added and the reaction mixture was stirred at room temperature for 14 h. The mixture and the solid clinging to the stir bar were dissolved by the addition of dichloromethane and methanol. Water (10 mL) and saturated aqueous sodium bicarbonate (10 mL) were added resulting in the formation of a precipitate. The mixture was filtered through a pad of Celite and the filter cake was rinsed with 5% methanol in dichoromethane. The filtrate was transferred to a separatory funnel . Brine (1(3 mL) was added and the aqueous layer was extracted (with gentle shaking) with 5% methanol in dichloromethane (4 x 15 mL). The combined organic layers were washed with brine (15 mL). The organic layer was dried over MgS04, filtered, and concentrated. The product was purified by column chromatography on silica gel (30% ethyl acetate containing 5% methanol/ hexanes 100% ethyl acetate containing 5% methanol/hexanes; 24 g column) to afford ((2R,3R,4S,5R,6S)-3-acetoxy-6-(((3R,4R,5S)-4-hydroxy-5-(4-(pyrazin-2-yl)-l /7-l ,2,3-triazol-l-yl)tetrahydro-2i7-pyran-3-yl)thio)-5- methoxy-4-(4~(3,4,5-trifluorophenyl)-li/-L2,3~triazoi-l-yl)tetrahydro-2/f-pyran~2- yl)m ethyl acetate (65 mg, (3 09(3 mmol, 90% yield) as a white solid. 41 NMR (4(30 MHz, CHLOROFORMS) d 9.44 (d, 7=0.8 Hz, 1H), 8.55 (s, 2H), 8.35 (s, 1H), 7.83 (s, 1H), 7.47 (dd, .7=8.0, 6 5 Hz, 2H), 5.51 (d, 7=2.8 Hz, H I ), 4.74 – 4.64 (m, 2H), 4 62 – 4 52 (m, 1H), 4.40 (dd, 7=11.5, 5.0 Hz, 1H), 4.32 (dd, 7=11.8, 5.0 Hz, 1 1 1). 4.26 (t, 7=9.9 Hz, 1H), 4.20 – 4.09 (m, 4H), 4 09 – 4 03 (m, 1 H), 3.52 (t, 7=1 1.9 Hz, 1H), 3 36 (s, 3H), 3 17 (ddd. 7=1 1 .8, 9.8, 5.0 Hz, i l l ), 2.1(3 (s, 31 1 ), 1.94 (s, 3H); 1.C7MS (ESI) mie 721 .2 [(M+H)+, calcd for CsoHxrFsNsOgS 721.2], /R = 1.88 min (Method 2).

According to the analysis of related databases, 153800-11-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; HARTZ, Richard A.; XU, Li; YOON, David S.; REGUEIRO-REN, Alicia; JALAGAM, Prasada Rao; PANDA, Manoranjan; NAIR, Satheesh Kesavan; (171 pag.)WO2019/241461; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

78342-42-4, name is (S)-2,5-Dihydro-3,6-dimethoxy-2-isopropylpyrazine, belongs to pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 78342-42-4

To a solution of 3.32 g (18 mmol) of commercially available (2S)-2,5-dihydro-3,6-dimethoxy-2-isopropylpyrazine in 100 mL of tetrahydrofuran at ?70° C. was added 12 mL (19 mmol) of a 1.6M solution of butyllithium in hexanes. After stirring at this temperature for 20 min, 5 g (19.5 mmol) of 2-fluoro-4-trifluoromethylbenzyl bromide in 20 mL of tetrahydrofuran was added and stirring was continued for 3 h before warming the reaction to ambient temperature. The reaction was quenched with water, concentrated in vacuo, and extracted with ethyl acetate. The combined organic phase was washed with brine, dried, and concentrated in vacuo. Purification by flash chromatography (silica gel, 0-5percent ethyl acetate in hexanes) afforded 5.5 g of the title compound. 1H NMR (500 MHz, CDCl3) delta 7.33-7.25 (m, 3H), 4.35-4.31 (m, 1H), 3.75 (s, 3H), 3.65 (s, 3H), 3.60 (t, 1H, J=3.4 Hz), 3.33 (dd, 1H, J=4.6, 13.5 Hz), 3.03 (dd, 1H, J=7, 13.5 Hz), 2.25-2.15 (m, 1H), 1.0 (d, 3H, J=7 Hz), 0.66 (d, 3H, J=7 Hz)

The synthetic route of 78342-42-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck Sharp & Dohme Corp.; Edmondson, Scott D.; Fisher, Michael H.; Kim, Dooseop; Maccoss, Malcolm; Parmee, Emma R.; Weber, Ann E.; Xu, Jinyou; US2015/359793; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 33332-28-4, name is 2-Amino-6-chloropyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 33332-28-4, Recommanded Product: 33332-28-4

2,6-Dichloropyrazine (2.89 g, 19.4 mmol) was stirred in aqueous NH3 (28percent, 10 ml.) and heated to 100°C in a sealed tube for 18 hours. The reaction mixture was cooled and the resultant precipitate was filtered. Trituration with water and then ether gave 6- chloropyrazin-2-amine as a white solid (2.28 g, 17.6 mmol, 91 percent yield). 1H NMR (d6-DMSO, 400 MHz) ? 6.9 (brs, 2H), 7.70 (d, J = 0.4, 1 H), 7.80 (d, J = 0.4, 1 H); LC-MS (ZQ, 6 minutes) Rt = 1.05 minutes; m/z (ESI+) 130 (M+H).6-Chloropyrazin-2-amine (2.50 g, 19.3 mmol) was stirred in CH2CI2 (60 ml.) at 0°C.A/-Bromosuccinimide (2.92 g, 16.4 mmol) was added slowly and the reaction mixture was stirred at 0°C for 60 minutes. The reaction mixture was filtered through celite and concentrated to give a brown oil. Purification by flash chromatography, eluting with 0-25percent EtOAc-hexanes, gave 5-bromo-6-chloropyrazin-2-amine as a yellow solid (1 .69 g, 8.16 mmol, 42percent yield). 1H NMR (de-DMSO, 400 MHz) ? 7.1 (brs, 2H), 7.65 (s, 1 H); LC-MS (ZQ, 4 minutes) Rt = 1.46 minutes; m/z (ESI-) 205 (M-H).A mixture of 5-bromo-6-chloropyrazin-2-amine (1 .00 g, 4.8 mmol), copper (I) iodide (914 mg, 4.8 mmol), 18-crown-6 (95 mg, 0.36 mmol) andtetrakis(triphenylphosphine)palladium (0) (83 mg, 0.072 mmol) was suspended in dry DMF (20 ml.) and a stream of nitrogen was passed through for 5 minutes. Potassium cyanide (312 mg, 4.8 mmol) was added and the mixture was stirred at room temperature for 30 minutes, then refluxed at 200°C for 3 hours. The mixture was cooled, diluted with EtOAc and absorbed onto silica gel (10 g). DMF was removed by evaporation. The product was purified by flash chromatography, eluting with 1 :1 EtOAc-hexanes, to yield 5- amino-3-chloropyrazine-2-carbonitrile as a yellow solid (607 mg, 3.93 mmol, 82percent yield). 1H NMR (d6 DMSO, 400 MHz) ? 7.87 (s, 1 H), 8.1 (brs, 2H); LC-MS (ZQ, 4 minutes) Rt = 1.20 minutes; m/z (ESI-) 153 (M-H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Amino-6-chloropyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; COLLINS, Ian; LAINCHBURY, Michael; MATTHEWS, Thomas Peter; READER, John Charles; WO2013/68755; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 939412-86-9, A common heterocyclic compound, 939412-86-9, name is (3-Chloropyrazin-2-yl)methanamine hydrochloride, molecular formula is C5H7Cl2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of (trans)-6-oxooctahydro-l H-quinolizine-3 -carboxylic acid (520 mg, 2.64 mmol), (3-chloropyrazin-2-yl)methanamine hydrochloride (570 mg, 3.17 mmol), HATU (1.50 g, 3.95 mmol) and TEA (0.79 g, 7.91 mmol) in DCM (13 mL) was stirred at 25 C overnight. The mixture was quenched with H20 (40 mL) and extracted with DCM (15 mL*3).The combined organic layerswere dried over anhydrous sodium sulfate, filtered and concentrated to give a crude product.The crude product was purified by column chromatography on silica gel eluting with PE / THF (0-60%) to give (trans)- N-((3-chloropyrazin-2-yl)methyl)-6-oxooctahydro-l H-quinolizine-3 -carboxamide (0.7 g, 82.35%) as a light yellow solid. 1H NMR (400MHz, CDC13) delta = 8.53 – 8.41 (m, 1H), 8.33 (d, J=2.5 Hz, 1H), 6.96 (br. s., 1H), 5.08 – 4.88 (m, 1H), 4.73 – 4.61 (m, 2H), 3.40 – 3.26 (m, 1H), 2.72 – 2.57 (m, 1H), 2.47 – 2.28 (m, 3H), 2.12 – 2.00 (m, 2H), 1.89 – 1.77 (m, 4H), 1.73 – 1.62 (m, 1H), 1.58 – 1.47 (m, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK SHARP & DOHME CORP.; WU, Hao; KIM, Ronald M.; LIU, Jian; GAO, Xiaolei; BOGA, Sobhana Babu; GUIADEEN, Deodialsingh; LIU, Shilan; YANG, Chundao; WANG, Hongjian; WO2014/113932; (2014); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 59489-71-3, These common heterocyclic compound, 59489-71-3, name is 2-Amino-5-bromopyrazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 5-bromopyrazinamine (3.0 g, 17.2 mmol, 1.0 equiv) in HI ( 1 1.1 mL, 57% in water) at 00C was slowly added I2 (3.0 g, 24.1 mmol, 0.7 equiv) over 1 hr, followed by addition OfNaNO2 (5.0 g, 145 mmol, 4.2 equiv) over a period of 3 hr at 0 0C. The reaction mixture was made alkaline by first adding 10% Na2S2Os solution (150 mL), then saturated Na2COs solution (90 mL). The mixture was extracted with diethyl ether (3 x 250 mL). The organic layer was washed with 10% Na2S2Os solution, dried (Na2SO4), filtered and concentrated in vacuo. The crude product was purified by column chromatography [SiO2, ethyl acetate/hexanes, 0:100 to 10:90, v/v] to give 2-bromo-5- iodo-pyrazine (1.6 g, 32%). 1H NMR (400 MHz, CD2Cl2) delta 8.62 (s, IH), 8.51 (s, IH).

The synthetic route of 59489-71-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GmbH; XENON PHARMACEUTICALS INC; WO2008/24390; (2008); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 95-58-9, name is 2-Chloro-3-methylpyrazine, A new synthetic method of this compound is introduced below., category: Pyrazines

In an autoclave, 2-chloro-3-methyl-pyrazine (1) (10.0 g, 77.8 mmol) was dissolved in dry methanol (30 mL) . Ammonia gas (60 g) was added. The mixture was heated to 15O0C for 8 hours, (start pressure: 10 bar, end pressure: 90 bar) . After cooling to rt, the mixture was evaporated to a brown solid, which was dissolved in IN hydrochloric acid (100 mL) and washed with dichloro- methane . The aqueous layer was slowly poured on cold saturated aqueous ammonia (150 mL) , then extracted with dichloromethane (3 x 100 mL) . The combined organic layers were dried (Na2SO4) and evaporated. The product was extracted from the residual solid with hot acetone (200 mL) . Evaporation yielded 36 % of 3-methyl-pyrazin-2- ylamine (2) as a yellow solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ESBATECH AG; WO2006/131003; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 875781-43-4, name is 2-Bromo-5H-pyrrolo[2,3-b]pyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 875781-43-4, Product Details of 875781-43-4

Example 3; Synthesis of 2-(4-chloro-phenyl)-5H-pyrrolo[2,3-b]pyrazine 7; 2-(4-Chloro-phenyl)-5H-pyrrolo[2,3-b]pyrazine 7 was prepared in one step from 2-bromo-5H-pyrrolo[2,3-b]pyrazine 1 as shown in Scheme 1.; Step 1-Preparation of 2-(4-chloro-phenyl)-5H-pyrrolo[2,3-b]pyrazine (7); In a microwave tube containing 2-bromo-5H-pyrrolo[2,3-b]pyrazine (1, 0.165 g, 0.833 mmol), 4-chlorophenylboronic acid (6, 0.118 g, 0.757 mmol), and [1,1′-bis(diphenylphosphino)-ferrocene]dichloropalladium(II) (0.028 g, 0.038 mmol), 1.5 mL of acetonitrile and 1.5 mL of 1.00 M potassium carbonate in water were added. The resulting mixture was heated at 120 C. in the microwave for 10 minutes. The reaction was poured into 1M aqueous hydrochloric acid and extracted with ethyl acetate. The organic layer was washed with brine, dried over anhydrous magnesium sulfate and filtered. The filtrate was concentrated under vacuum and purified by silica gel column chromatography eluting with 1% methanol in dichloromethane. Appropriate fractions were combined and concentrated under vacuum to give the desired compound (7, 107 mg). MS (ESI) [M+H+]+=229.8.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromo-5H-pyrrolo[2,3-b]pyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Ibrahim, Prabha N.; Spevak, Wayne; Cho, Hanna; US2009/306087; (2009); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 939412-86-9, name is (3-Chloropyrazin-2-yl)methanamine hydrochloride, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 939412-86-9, SDS of cas: 939412-86-9

10g of (3-chloropyrazin-2-yl) methylamine. Hydrochloride and 10.5g of LN-Cbz-2-deuterated proline were suspended in 400ml of dichloromethane, and the reaction solution was cooled to 0-5 C and dropped Add 24ml of triethylamine and keep it at 0-5 C for 15min.17 g of O-(7-azabenzotriazol-1-yl)-N,N,N?,N?-tetramethyluronium hexafluorophosphate was added.The mixture was stirred at 0-5 C for 1 hour.The reaction solution was washed with 0.1M hydrochloric acid, sodium bicarbonate solution, saturated brine, dried and concentrated.Flash silica gel column chromatography gave 11.9 g of (S) -2-((3-chloropyrazin-2-yl) methylcarbamoyl) -2′-deuteropyrrolidine-1-carboxylic acid benzyl ester.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (3-Chloropyrazin-2-yl)methanamine hydrochloride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Andikang (Wuxi) Biological Technology Co., Ltd.; Zhu Xiaoyun; Jiang Weiping; (34 pag.)CN110563733; (2019); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem