Tag: M.W=100-200

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 63286-28-2, name is 2-Chloro-3-hydrazinylpyrazine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C4H5ClN4

2-Chloro-3-hydrazinylpyrazine C-l (15.6 g; 108 mmol) is slurried up in (300 ml) THF and cooled down in an ice bath to -5 C. Trifluoroacetic anhydride (17 ml; 118 mmol) is also dissolved in 300 ml THF and dropped slowly to the first solution. After 1 h most of the THF is evaporated, than a small amount of water is added and the mixture is extracted with DCM. The organic phase is dried over MgS04 and evaporated to dryness. Yield: 100 % HPLC-MS: (M+H)+ = 241/243; tRet = 1.31 min; method FSUN2

The synthetic route of 63286-28-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; ENGELHARDT, Harald; WO2015/67770; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 36070-80-1, name is 5-Chloropyrazine-2-carboxylic acid, A new synthetic method of this compound is introduced below., HPLC of Formula: C5H3ClN2O2

A solution of 5-chloro-pyrazine-2-carboxylic acid (1.5 g, 9.46 mmol) in dry dimethylsulphoxide (5 ml) was treated with cyclopropyl-methanol (1.15 ml, 14.1 mmol) and powdered potassium hydroxide (2.12 g, 37.8 mmol). The mixture was irradiated in a microwave vessel at 80 C for 45 minutes. In order to complete the transformation the irradiation was continued for another 45 minutes at 80 C. For the workup, the reaction mixture was quenched with a solution of citric acid (10%), then extracted with ethyl acetate (5×30 ml) followed by a 20:80-mixture of methanol and dichloromethane (200 ml). The combined organic layers were dried over sodium sulphate, evaporated at reduced pressure and, finally, lyophilized to remove residual dimethylsulphoxide. Further purification by flash chromatography on silica gel yielded the 5-cyclopropylmethoxy-pyrazine-2-carboxylic acid as an off-white solid (1.83 g, 27% of theory). MS (ISP): m z = 195 [M+H]+

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; SIENA BIOTECH S.P.A.; BANNER, David; GUBA, Wolfgang; HILPERT, Hans; MAUSER, Harald; MAYWEG, Alexander, V.; NARQUIZIAN, Robert; PINARD, Emmanuel; POWER, Eoin; ROGERS-EVANS, Mark; WOLTERING, Thomas; WOSTL, Wolfgang; WO2011/69934; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 75907-74-3, name is (3,5,6-Trimethylpyrazin-2-yl)methanol, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 75907-74-3, Product Details of 75907-74-3

To a stirred, cooled (0C) solution of (3,5,6-trimethylpyrazin-2-yl)methanol (0.3 g, 1.97 mmol) in dichloromethane (5 ml) under an argon atmosphere was added dropwise a solution of thionyl chloride (469 mg, 286 mu, 3.94 mmol) in 2 ml CH2CI2. When the addition was complete, the ice bath was removed and stirring at r.t. was continued for 2 hrs. The mixture was concentrated to dryness to leave the crude product as a light red solid (417 mg) which was used in the next step without further purification. MS: M = 171.1 (M+H)+

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (3,5,6-Trimethylpyrazin-2-yl)methanol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; FLOHR, Alexander; GROEBKE ZBINDEN, Katrin; KOERNER, Matthias; LERNER, Christian; WO2013/178569; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 38557-72-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 38557-72-1, name is 2-Chloro-3,5-dimethylpyrazine, This compound has unique chemical properties. The synthetic route is as follows.

Example 2Synthesis Example 2Example 2 gives a specific example of the synthesis of the organometallic complex represented by the structural formula (130) in Embodiment 1 which is one embodiment of the present invention, tris[3,5-dimethyl-2-(4-phenoxyphenyl)pyrazinato]iridium(III) (abbreviation: [Ir(dmpoppr)3]). A structure of [Ir(dmpoppr)3] is illustrated below. Synthesis of Tris[3,5-dimethyl-2-(4-phenoxyphenyl)pyrazinato]iridium(III) (abbreviation: [Ir(dmpoppr)3])First, 1.42 g of the ligand prepared in Step 1 in Synthesis Example 1 above, Hdmpoppr, and 0.50 g of tris(acetylacetonato)iridium(III) were placed into a reaction container provided with a three-way cock, and the air in the reaction container was replaced with argon. After that, the mixture was heated at 250 C. for 43 hours to be reacted. The reactant was dissolved in dichloromethane, and this solution was filtered. After the solvent of the filtrate was distilled and the obtained residue was washed with ethyl acetate and then with methanol, recrystallization from dichloromethane gave the organometallic complex which is one embodiment of the present invention, [Ir(dmpoppr)3] (an orange powder in a yield of 22%). The synthesis scheme is illustrated in the following formulae (f). The results of the nuclear magnetic resonance (1H NMR) spectroscopy, by which the orange powder obtained above was analyzed, are shown below. In addition, a 1H-NMR chart is shown in FIG. 12. These results revealed that the organometallic complex represented by the above-described structural formula (130) which is one embodiment of the present invention, [Ir(dmpoppr)3], was obtained in Synthesis Example 2.1H NMR. delta (CDCl3): 2.38 (s, 9H), 2.97 (s, 9H), 6.31 (d, 3H), 6.47 (dd, 3H), 6.82 (d, 6H), 7.02 (t, 3H), 7.15 (s, 3H), 7.21 (t, 6H), 7.81 (d, 3H).Next, an ultraviolet-visible absorption spectrum (hereinafter, simply referred to as an ?absorption spectrum?) of a dichloromethane solution of [Ir(dmpoppr)3] and an emission spectrum thereof were measured. The measurement of the absorption spectrum was conducted at room temperature, for which an ultraviolet-visible light spectrophotometer (V550 type manufactured by Japan Spectroscopy Corporation) was used and the dichloromethane solution (0.083 mmol/L) was put in a quartz cell. In addition, the measurement of the emission spectrum was conducted at room temperature, for which a fluorescence spectrophotometer (FS920 manufactured by Hamamatsu Photonics Corporation) was used and the degassed dichloromethane solution (0.50 mmol/L) was put in a quartz cell. Measurement results of the obtained absorption and emission spectra are shown in FIG. 13, in which the horizontal axis represents wavelength and the vertical axis represents absorption intensity and emission intensity. In FIG. 13 where there are two solid lines, the thin line represents the absorption spectrum and the thick line represents the emission spectrum. Note that the absorption spectrum in FIG. 13 is the results obtained in such a way that the absorption spectrum measured by putting only dichloromethane in a quartz cell was subtracted from the absorption spectrum measured by putting the dichloromethane solution (0.083 mmol/L) in a quartz cell.As shown in FIG. 13, the organometallic complex of one embodiment of the present invention, [Ir(dmpoppr)3], has an emission peak at 561 nm, and yellow light emission was observed from the dichloromethane solution.

The chemical industry reduces the impact on the environment during synthesis 2-Chloro-3,5-dimethylpyrazine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Semiconductor Energy Laboratory Co., Ltd.; US2012/95226; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21948-70-9 as follows. Product Details of 21948-70-9

General procedure: To a stirred solution of 2-(Methylthio)Pyrazine (0.013 g,0.10 mmol) in 5 mL of methanol, AgPF6 (0.051 g, 0.20 mmol) wasadded. Just after addition a white precipitate was formed and thereaction mixture was stirred for 30 min. The precipitate collectedand dried under vacuum. The white powder was dissolved in acetonitrileand kept for crystallization in dark. After few days colourlessrod shape crystals suitable for single crystal X-ray diffractionwere obtained. Yield: 0.059 g (79%). Anal. Calc. for C5H6N2F6PSAg:C, 15.85; H, 1.60; N, 7.39, Found: C, 15.52; H, 1.54; N, 8.03%. IR(KBr, cm1): 3067 (w), 2996 (w), 2924 (w), 1635 (w), 1507 (m),1468 (m), 1383 (m), 1299 (w), 1137 (s), 1046 (m), 1002 (m), 827(s), 561 (s). 1H NMR (DMSO, dppm): 2.53 (Me), 8.29, 8.47, 8.57(pyrazine ring). 13C NMR (DMSO, dppm): 12.68 (Me), 140.14,143.32, 144.83, 157.37 (pyrazine ring).

According to the analysis of related databases, 21948-70-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Singh, Suryabhan; Raghuvanshi, Abhinav; Mathur, Pradeep; Singh, Amrendra K.; Polyhedron; vol. 169; (2019); p. 8 – 13;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 1174321-06-2, These common heterocyclic compound, 1174321-06-2, name is 5-(Difluoromethyl)pyrazine-2-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of tert-butyl 4-aminopiperazine-l-carboxylate (578 mg, 2.8 mmol, 1.0 equiv) in DMF (05 mL) was added HATU (2128 mg, 5.6 mmol, 2.0 equiv) at RT and stirred for 10 minutes. Then 5-(difluoromethyl)pyrazine-2-carboxylic acid (500 mg, 2.8 mmol, 1.0 equiv) was added followed by the addition of DIPEA (1.5 mL, 8.4 mmol, 3.0 equiv). The resulting reaction mixture was allowed to stir at RT for ovemigiit. Product formation was confirmed by LCMS. the reaction mixture was diluted with water (50 mL) and extracted with EtOAc (50 mL c 2). The combined organic layer was washed with water (30mL), brine solution (30 mL x 2), dried over anhydrous sodium sulfate and concentrated under reduced pressure, to obtain tert-butyl 4-(5-(difluoromethyl)pyrazine-2-carboxamido)piperazine-l -carboxylate (400 mg, 39 % Yield) as a brown solid. LCMS 358.2 [ M i l : NMR (400 MHz, DMSCWe) d 10.13 (s, 1 H), 9.24 (s, 1 H), 8.99 is. 1 H), 3.34 – 3.49 (m, 4 H), 2.84 (t, .7=5.04 Hz, 4 H), 1.41 (s, 9H).

The synthetic route of 1174321-06-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PRAXIS BIOTECH LLC; DELGADO OYARZO, Luz Marina; URETA DIAZ, Gonzalo Andres; PUJALA, Brahmam; PANPATIL, Dayanand; BERNALES, Sebastian; CHAKRAVARTY, Sarvajit; (0 pag.)WO2019/236710; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 54013-07-9, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 54013-07-9, name is 5-Methoxypyrazin-2-amine, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: To a flame-dried flask was added 8 (0.046g, 0.142mmol), xantphos (0.016g, 0.028mmol), potassium carbonate (0.392g, 2.83mmol), palladium(II) acetate (0.003g, 0.014mmol), and the respective amine (0.170mmol). The flask was purged with nitrogen three times and then anhydrous dioxane (1.5mL) was added under nitrogen. The reaction was refluxed at 105C for 12h while under nitrogen, maintaining a positive pressure. The mixture was concentrated under reduced pressure, separated by silica column chromatography (dichloromethane/isopropanol), and purified by reverse phase chromatography (water/acetonitrile).

The chemical industry reduces the impact on the environment during synthesis 5-Methoxypyrazin-2-amine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Woodring, Jennifer L.; Bachovchin, Kelly A.; Brady, Kimberly G.; Gallerstein, Mitchell F.; Erath, Jessey; Tanghe, Scott; Leed, Susan E.; Rodriguez, Ana; Mensa-Wilmot, Kojo; Sciotti, Richard J.; Pollastri, Michael P.; European Journal of Medicinal Chemistry; vol. 141; (2017); p. 446 – 459;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

These common heterocyclic compound, 5521-55-1, name is 5-Methylpyrazine-2-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 5521-55-1

(1) 175 g of 5-methyl-2-pyrazinecarboxylic acid was suspended in 1 L of dioxane, then 1 L of t-butanol, 175 mL of triethylamine, and 287 mL of diphenyl azidophosphate were sequentially added to the suspension, and the reaction solution was heated to 100C. The obtained reaction solution was stirred at the same temperature for 3 hours and then cooled to room temperature, and the solvent was distilled off under reduced pressure. The residue was poured onto a saturated aqueous solution of sodium hydrogen carbonate, and the aqueous phase was extracted with ethyl acetate. The obtained extraction liquid was washed with a saturated aqueous solution of ammonium chloride and dried, and then the solvent was distilled off under reduced pressure. The obtained crude product was crystallized from acetonitrile, to obtain 158 g of the following Compound [1-1]. [Show Image] The spectral data of the compound represented by the above Formula [1-1] is presented below. 1H-NMR (CDCl3) delta: 9.15 (1H, s), 8.70 (1H, s), 7.41 (1H, brs), 2.51 (3H, s), 1.55 (9H, s). mass: 210 (M+1)+.

The synthetic route of 5-Methylpyrazine-2-carboxylic acid has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BANYU PHARMACEUTICAL CO., LTD.; EP1754706; (2007); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 399-66-6,Some common heterocyclic compound, 399-66-6, name is [1,2,4]Triazolo[1,5-a]pyrazine, molecular formula is C5H4N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Platinum(IV) oxide (2.75 g, 12.1 mmol) was added, under nitrogen, to a suspension of calcium oxide (9.30 g, 166 mmol) and [1,2,4]triazolo[1,5-a]pyrazine (18.10 g, 151 mmol) in 2-methoxyethanol (150 ml). The reaction mixture was stirred for 21.5 h under a hydrogen atmosphere, filtered over Celite, and washed with dichloromethane/ethanol (9:1). The filtrate was concentrated, coevaporated with toluene and diisopropyl ether, and then dissolved in ethyl acetate, filtered over Celite, washed with ethyl acetate and concentrated again. The residue was dissolved in hot diisopropyl ether, filtered, washed with diisopropyl ether, and concentrated for 7 h in vacuo. Yield: 17.12 g (92%)

The synthetic route of 399-66-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Gruenenthal GmbH; US2008/153843; (2008); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 3149-28-8,Some common heterocyclic compound, 3149-28-8, name is 2-Methoxypyrazine, molecular formula is C5H6N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Representative procedure for the preparation of 1-phenoxycarbonyl-2-phenyl-3-methoxy-1,2-dihydropyrazine (3a). To a stirred solution of 2-methoxypyrazine (0.200 g, 1.816 mmol) inanhydrous THF (5 mL) was added phenylchloroformate (0.28 mL, 2.225 mmol) at 0 C andstirring was continued under nitrogen atmosphere until salt formation was completed (15 min, asdetermined by TLC on neutral alumina, EtOAc/hexanes 1:19). The reaction mixture was cooledto -41 C, a 1 M solution of phenylmagnesium bromide in THF (2.4 mL, 2.4 mmol) was addedand the mixture stirred until reaction completion (40 min, as determined by TLC on neutral SiO2,EtOAc/hexanes 1:9), and then quenched with 2 mL of aqueous 20% NH4OH/NH4Cl 1:1 (w/w).The mixture was extracted with dichloromethane (2 × 15 mL), dried over Na2SO4, andconcentrated in vacuo. Purification of the crude mixture by flash silica gel columnchromatography (0-15% EtOAc/hexanes) afforded 3a (0.488 g, 87%) as a white solid (3:2mixture of rotamers): mp: 81-82 C; 1H NMR (CDCl3, 500 MHz) delta 7.49-7.27 (m, 7H), 7.20 (t, J= 7.5 Hz, 1H), 7.12 (d, J = 8.0 Hz, 1H), 6.99 (d, J = 7.5 Hz, 1H), 6.67 and 6.63 (2d due torotamers, J = 5.5 Hz, 1H), 6.16 and 6.14 (2d due to rotamers, J = 5.0 Hz, 1H), 5.89 and 5.87 (2sdue to rotamers, 1H), 3.84 and 3.83 (2s due to rotamers, 3H); 13C NMR (CDCl3, 125 MHz) delta160.2, 160.0, 151.6, 151.5, 150.7, 150.4, 136.8, 135.9, 129.3, 128.8, 128.7, 128.6, 127.2, 126.6,125.9, 125.8, 121.3, 118.2, 118.1, 112.5, 111.8, 56.0, 54.6, 54.0, 53.9; HRMS (ESI) m/z calcdfor C18H17N2O3 [M + H]+ 309.12337, found 309.123554

The synthetic route of 3149-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; St Hilaire, Valentine R.; Hopkins, William E.; Miller, Yenteeo S.; Dandepally, Srinivasa R.; Williams, Alfred L.; Beilstein Journal of Organic Chemistry; vol. 15; (2019); p. 72 – 78;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem