Pyrazines

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1209646-17-2, name is 5-(4-(tert-Butoxycarbonyl)piperazin-1-yl)pyrazine-2-carboxylic acid, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 5-(4-(tert-Butoxycarbonyl)piperazin-1-yl)pyrazine-2-carboxylic acid

5-(4-(tert-butoxycarbonyl) piperazin-1 -yl) pyrazine-2-carboxylic acid (200 mg, 0.65 mmol), tert-butyl 2-amino-4-(thiophen-2-yl) phenylcarbamate (157 mg, 0.54 mmol) and EDCI (311 mg, 1.62 mmol) were added into Py (5 ml). The mixture was stirred at room temperature for overnight. When the reaction finished, it was concentrated and washed with Et20. The yellow solid was collected as product (310 mg, 65% yield).

According to the analysis of related databases, 1209646-17-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Regenacy Pharmaceuticals, LLC; van Duzer, John H.; Mazitschek, Ralph; (123 pag.)US2018/141923; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 78342-42-4, name is (S)-2,5-Dihydro-3,6-dimethoxy-2-isopropylpyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 78342-42-4, HPLC of Formula: C9H16N2O2

To a solution of (25)-3,6-dimethoxy-2-(propan-2-yl)-2,5-dihydropyrazine (1.84 g, 9.99 mmol) in THF (50 mL) was added n-BuLi (6.0 mL, 2.5M in n-hexane) at -78 °C. The resulting solution was stirred for 30 mm at -78 °C. To this was added benzyl 4-[4-(bromomethyl)-2,3,5,6- tetrafluorophenyl]piperazine-1-carboxylate (4.60 g, 9.97 mmol) at -78 °C. The resulting solution was stirred for 2h at -78 °C. The reaction was then quenched by the addition of NH4C1 (sat., aq.) (40 mL). The resulting mixture was extracted with ethyl acetate (3 x 30 mL). The organic layers were combined, washed with brine (3 x 30 mL), dried over anhydrous sodium sulfate, filtered and concentrated under vacuum. The residue was purified by reversed phase chromatography (Column: C18 silica gel; Mobile phase, A: water (containing 0.05percent TFA) and B: ACN (5percent to 75percent in 30 mm) to give benzyl 4-(4-[[(2R,55)-3,6-dimethoxy-5-(propan-2-yl)-2,5-dihydropyrazin-2-yl]methyl]-2, 3,5, 6-tetrafluorophenyl)piperazine- 1 -carboxylate as yellow oil. MS (ESI, m/z): 565 [M+H]t

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (S)-2,5-Dihydro-3,6-dimethoxy-2-isopropylpyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; FORMA THERAPEUTICS, INC.; ZABLOCKI, Mary-Margaret; GUERIN, David J.; NG, Pui Yee; WANG, Zhongguo; SHELEKHIN, Tatiana; CARAVELLA, Justin; LI, Hongbin; IOANNIDIS, Stephanos; (518 pag.)WO2019/32863; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

17231-51-5, name is 3-Amino-6-bromopyrazine-2-carbonitrile, belongs to pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 3-Amino-6-bromopyrazine-2-carbonitrile

Step A Synthesis of 2-amino-3-cyano-5-(trimethylsilylethynyl)pyrazine as an intermediate A solution of 3.0 grams (0.015 mole) of 2-amino-3-cyano-5-bromopyrazine and 2.1 grams (0.021 mole) of trimethylsilylacetylene in 50 mL of acetonitrile is stirred, and 10.6 mL of triethylamine, 0.13 gram of copper iodide, and 0.29 gram of bis(triphenylphosphine)palladium(II) chloride are added in order. Upon completion of addition, the reaction mixture is stirred at ambient temperature for about 20 hours. The reaction mixture is warmed to 70 C., where it is stirred for about 7.5 hours. After this time, the reaction mixture is concentrated under reduced pressure to a residue. The residue is dissolved in ethyl acetate, and the solution is washed with 50 mL of aqueous, dilute hydrochloric acid. The organic layer is dried with magnesium sulfate and filtered. The filtrate is concentrated under reduced pressure to a residue. The residue is subjected to column chromatography on silica gel. Elution is accomplished using tetrahydrofuran/methylene chloride combinations. The product-containing fractions are combined and concentrated under reduced pressure, yielding 2-amino-3-cyano-5-(trimethylsilylethynyl)pyrazine.

The synthetic route of 17231-51-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FMC Corporation; US5521190; (1996); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 87486-34-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 87486-34-8, name is 3,5-Dibromo-1-methylpyrazin-2(1H)-one belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2a-j (10 mmol, 1.0 eq) , 3,5-dibromo-1-methylpyrazin-2(1H)-one (2.95 g, 11 mmol, 1.1 eq) and DIEA (3.3 mL,20 mmol, 2.0 eq) in MeCN (20mL) was stirred at 80 °C for 5 hours. After cooling to room temperature, thesolvent was removed in vacuo, and the residue was purified using silica gelchromatography to give the title compounds, yield 72-85percent.

The synthetic route of 3,5-Dibromo-1-methylpyrazin-2(1H)-one has been constantly updated, and we look forward to future research findings.

Reference:
Article; Yang, Jianhong; Du, Jiatian; Huang, Chong; Wang, Tianqi; Huang, Luyi; Yang, Shengyong; Li, Linli; Bioorganic and Medicinal Chemistry Letters; vol. 29; 13; (2019); p. 1609 – 1613;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 5521-55-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 5521-55-1 as follows.

Step 5 4-[3-(4-Chloro-benzoylamino)-propoxy]-3-[3-(5-methyl-pyrazin-2-yl)-ureido]-benzoic acid ethyl ester 5-Methyl-pyrazine-2-carboxylic acid (0.5 g, 3 mmol) was heated in toluene (50 mL) with stirring. Diphenyl phosphoryl azide (DPPA) was added. The temperature was increased to 100 C. over 10 minutes and maintained for a further 15 minutes, until the evolution of gas had ceased. During this time, the solution changed colour from orange to dark red/brown. 3-Amino-4-[3-(4-chloro-benzoylamino)-propoxy]-benzoic acid ethyl ester (1.15 g, 3 mmol), in toluene (20 mL), was added via syringe at 100 C. and stirred for 30 minutes. The heat was removed and the reaction mixture was cooled to room temperature. The resulting precipitate was collected via filtration to give a white solid (888 mg, 58%). 1H NMR (400 MHz, DMSO-d6) delta 10.17 (s, 1H), 8.87 (s, 1H), 8.65 (s, 1H), 8.66 (s, 1H, broad), 8.17 (s, 1H), 7.86 (d, 2H), 7.65 (dd, 1H), 7.52 (d, 2H), 7.15 (d, 1H), 4.30 (q, 2H), 4.24 (t, 2H), 3.52 (m, 2H), 2.39 (s, 3H), 2.16 (m, 2H), 1.31 (t, 3H). LCMS: method A, Rt=3.33 min, [MH+=512].

According to the analysis of related databases, 5521-55-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Millennium Pharmaceuticals, Inc.; US2005/176733; (2005); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 123-32-0,Some common heterocyclic compound, 123-32-0, name is 2,5-Dimethylpyrazine, molecular formula is C6H8N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2, 5-dimethylpyrazine (6 g, 55.6 mmol), carbon tetrachloride (50 mL) were added in a three-necked flask,After stirring, N-chlorosuccinimide (NCS) (7. 4 g, 55.6 mmol) and benzoyl peroxide(0. 05 g, 0.21 mmol),The reaction mixture was irradiated under incandescent light,Stir,Reflux reaction about 18h,TLC [V (ethyl acetate): V (petroleum ether) = 1: 2 as developing solvent] After the detection reaction is substantially complete,The reaction solution was cooled to 0 C,After standing for 1 hour,filter,The filter cake is washed with cold carbon tetrachloride,Combined filtrate and wash solution,Vacuum distillation of carbon tetrachloride,Get a light brown oil,Methylene chloride dissolved,After decolorization of activated carbon,Pale yellow oil,Without further direct reaction to the next step.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,5-Dimethylpyrazine, its application will become more common.

Reference:
Patent; Anhui University of Chinese Medicine; Hefei Industrial Pharmaceutical Institute Co., Ltd.; Li, JiaMing; He, GuangWei; Hu, MinHua; Huang, WeiJun; Zhu, Xiaoyu; Wang, Jie; Ye, WenFeng; Zhang, EnLi; (10 pag.)CN103664804; (2016); B;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 6905-47-1, A common heterocyclic compound, 6905-47-1, name is 2-Amino-6-methoxypyrazine, molecular formula is C5H7N3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 6-methoxypyrazin-2-amine (0.5 g, 4.0 mmol) in CHCI3 (25 mL) was added NCS (533 mg, 4.0 mmol). The reaction mixture was stirred at 40C for 12 h. The mixture was concentrated to give a residue. The residue was purified by column chromatography (Si02) to give 5-chloro-6-methoxypyrazin-2-amine (95 mg, 14.9% yield) as a yellow solid. NMR (400MHz, CHLOROF ORM-f) delta 7.32 (s, 1H), 4.42 (s, 2H), 3.96 (s, 3H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; QUENTIS THERAPEUTICS, INC.; VACCA, Joseph P.; LI, Dansu; BETTIGOLE, Sarah; (214 pag.)WO2019/94641; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 14508-49-7 as follows. Application In Synthesis of 2-Chloropyrazine

A mixture of 2-hydrazinopyrazine (820 mg, 7.45 mmol), prepared from 2-chloropyrazine and hydrazine using a procedure analogous to that described in the literature (P. J. Nelson and K. T. Potts, J. Org. Chem. 1962, 27, 3243, except that the crude product was extracted into 10% methanol/dichloromethane and filtered, and the filtrate was concentrated and purified by flash chromatography on silica gel, eluting with 100% ethyl acetate followed by 10% methanol in dichloromethane), TFA (2.55 g, 22.4 mmol), and polyphosphoric acid (10 mL) was heated to 140 C. with stirring for 18 h. The solution was added to ice and neutralized by the addition of ammonium hydroxide. The aqueous solution was extracted with ethyl acetate (3×), washed with brine, and dried over anhydrous magnesium sulfate. Concentration followed by flash chromatography (silica gel, 1:1 hexane:ethyl acetate, then 100% ethyl acetate) afforded the title compound as a solid (861 mg). 1H NMR (500 MHz, CDCl3) delta 8.17-8.20 (m, 2H), 9.54 (s, 1H). LC/MS (M+1) 189.

According to the analysis of related databases, 14508-49-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Merck Sharp & Dohme Corp.; Edmondson, Scott D.; Fisher, Michael H.; Kim, Dooseop; Maccoss, Malcolm; Parmee, Emma R.; Weber, Ann E.; Xu, Jinyou; US2015/359793; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C6H7N3O2

Example 81; Synthesis of (3,5-bis-trifluoromethyl-benzyl)- [3-(cycIopentylmethyl-ethyl-amino)- pyrazin-2-ylmethyl]-carbamic acid methyl ester; Step (i): Synthesis of 3-bromo-pyrazine-2-carboxylic acid methyl ester; Copper bromide (1.36 g, 6.1 mmol) and .pound.-butyl nitrite (0.78 g, 7.6 mmol) were added to a 50 mL round bottom flask along with acetonitrile (2 niL), and this mixture was heated at 60 0C for 5 min. After this time, 3-amino-pyrazine-2-carboxylic acid methyl ester (0.8 g, 5.09 mmol) was added portion- wise, with stirring, and stirring was continued at the same temperature for another 10 min. The reaction mixture was then cooled to RT, poured into 100 mL of dilute HCL (2N), and then extracted with diethyl ether (3 x 50 mL). The combined organic layer was washed with dilute HCl, dried over sodium sulfate, and then concentrated under vacuum to afford the title compound (0.139 g), yield: 12 percent.1H NMR (CDCl3, 400 MHz): d 8.58 (m, 2H), 4.04 (s, 3H)) ; m/z (CI-MS) 217 (M+) ; IR (neat, cm-1): 3385, 2955, 1742

The synthetic route of 16298-03-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REDDY US THERAPEUTICS, INC.; BARUAH, Anima; DE, Dibyendu; KHANNA, Ish Kumar; PILLARISETTI, Sivaram; MAITRA, Santanu; ALEXANDER, Christopher, W.; SREENU, Jennepalli; DAGER, Indu; WO2006/73973; (2006); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

356783-16-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 356783-16-9, name is 3,6-Dichloropyrazine-2-carbonitrile belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

REFERENTIAL EXAMPLE II-11 In 15 ml of dimethylformamide was dissolved 1.5 g of 3,6-dichloro-2-pyrazinecarbonitrile. After adding 1.2 g of 4-methoxyphenol and 1.8 g of potassium carbonate, the mixture thus obtained was stirred at room temperature for 30 minutes. A mixture of 20 mL of ethyl acetate and 60 mL of water was added to the reaction mixture, and the organic layer was separated. The organic layer was washed successively with water and saturated aqueous solution of sodium chloride and dried on anhydrous magnesium sulfate, and the solvent was removed under reduced pressure. The residue thus obtained was purified by silica gel column chromatography [eluent: n-hexane:ethyl acetate=5:1] to obtain 2.1 g of 6-chloro-3-(4-methoxyphenoxy)-2-pyrazinecarbonitrile as a yellow-colored solid product. R (KBr) cm-1: 2236 H-NMR (CDCl3) delta: 3.83(3H,s), 6.95(2H,d,J=9.2 Hz), 7.11(2H,d,J=9.2 Hz), 8.26(1H,s)

The synthetic route of 356783-16-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Toyama Chemical Co., Ltd.; US2003/130213; (2003); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem