Category: Pyrazines

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 69214-33-1 as follows. SDS of cas: 69214-33-1

Morpholine (2.0 ml, 23.2 mmol) was added to a stirred solution of a mixture 72/28 of 3-bromo-8-chloro-imidazo[l,2-a]pyrazine and 3,8-dibromo-imidazo[l,2-a]pyrazine (intermediate 15) (5.9 g, 11.6 mmol) and DIPEA (1.93 ml, 13.9 mmol) in ACN (54 ml). The mixture was stirred at 80 C for 7 h. and then the solvent was evaporated in vacuo. The crude product was dissolved in DCM and washed with a saturated solution of sodium carbonate. The organic layer was separated, dried (Na2S04), filtered and the solvents evaporated in vacuo. The crude product was purified by flash column chromatography (silica; EtOAc in DCM 10/90). The desired fractions were collected and evaporated in vacuo and the crude product precipitated from Et20 to yield intermediate 26 (2.79 g, 85%) as a white solid.

According to the analysis of related databases, 69214-33-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; BARTOLOME-NEBREDA, Jose, Manuel; CONDE-CEIDE, Susana; MACDONALD, Gregor, James; PASTOR-FERNANDEZ, Joaquin; VAN GOOL, Michiel, Luc, Maria; MARTIN-MARTIN, Maria, Luz; VANHOOF, Greta, Constantia, Peter; WO2011/110545; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 118853-60-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 118853-60-4 as follows.

Into a 50-mL round-bottom flask was placed pyridine (25 mL), methyl 6- aminopyrazine-2-carboxylate (1 g, 6.53 mmol, 1.00 equiv) and 1-methyl-1H-pyrazole-4- carbonyl chloride (1.13 g, 7.82 mmol, 1.20 equiv). The resulting solution was stirred for 2 h at 25 oC in an oil bath. The resulting mixture was concentrated under vacuum at 55 oC for 1 h. This resulted in 1.72 g (93% purity) of methyl 6-(1-methyl-1H-pyrazole-4-amido)pyrazine-2- carboxylate as a yellow solid.

According to the analysis of related databases, 118853-60-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; LYCERA CORPORATION; AICHER, Thomas, Daniel; PADILLA, Fernando; TOOGOOD, Peter, L.; CHEN, Shoujun; (331 pag.)WO2016/138335; (2016); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 939412-86-9, A common heterocyclic compound, 939412-86-9, name is (3-Chloropyrazin-2-yl)methanamine hydrochloride, molecular formula is C5H7Cl2N3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of compound V (49.8 g), DCM (500 mL) and DMF (5 mL) in a 500 mL three-neck flask, oxalyl chloride (38 g, 1.5 eq) was added at 0~10 C. The reaction mixture was warmed to RT. After completion of the reaction, the solvent was removed by concentration. DCM (200 mL) was added to obtain the compound VI solution in DCM. (0099) To a mixture of compound VII (30 g), DCM (240 mL) and TEA (6 eq) in a 1000 mL three-neck flask at 0~10 C, the solution of compound VI in DCM obtained from the above step was added dropwise, the reaction mixture was warmed to RT. After the reaction was completed, water (300 mL) was added to quench the reaction. The organic phase was washed with IN HCI aqueous solution (500 mL), saturated NaHC03 aqueous solution (500 mL) and water (500 mL). The organic phase was concentrated under vacuum. The crude product was recrystallized from IPAc/Heptane to afford compound VIII (61 g, 98% yield, 99.7% chiral purity).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; WANG, Peng; LI, Pixu; GU, Xiangyong; GE, Yadong; WANG, Zhong; GAO, Feng; DU, Qiangqiang; (25 pag.)WO2019/90269; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 14508-49-7, name is 2-Chloropyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14508-49-7, COA of Formula: C4H3ClN2

Intermediate 65; 4-Pyrazin-2-yl-lH-indole; 4-Bromoindole (0.1 g, 0.51 mmol), bis(pinacolato)diboron (0.172 g, 0.77 mmol), potassium acetate (0.075 g, 0.765 mmol) and PdCl2 (0.022 g, 0.031 mmol) were dissolved in DME (3 mL) and heated in the microwave for 900 seconds at 125C. The reaction was cooled and NaHCO3 (0.129 g, 1.53 mmol), 2-chloropyrazine (0.087 g, 0.77 mmol) tetrakis(triphenylphosphine)palladium (0.0295 g, 0.026 mmol), H2O (1 mL) and DME (1 mL) were added and the mixture was stirred in the microwave for 900 seconds at 120C. The mixture was diluted with dichloromethane and filtered. The filtrate was washed with water (2x), dried (MgSO4) and evaporated. The crude product was purified by flash chromatography using 2.5% to 5% CH3OH in dichloromethane. Not pure, purified by flash chromatography using hexane/EtOAc 7:3 to 1:1 as the eluent. Yield: 93 mg (47%). White solid. MS (electronspray; [M+H]+) m/z 196.3.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BIOVITRUM AB (publ); WO2008/3703; (2008); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 14508-49-7 as follows. COA of Formula: C4H3ClN2

Step 1 To a solution of chloropyrazine (11.5 g, 0.1 mmol) in absolute ethanol (50 ml) was added anhydrous hydrazine (16 ml, 0.5 mmol) and the reaction mixture was refluxed for 3 h. The organics were removed in vacuo and the residue was extracted with benzene to give hydrazinopyrazine (4.2 g).

According to the analysis of related databases, 14508-49-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Syntex (U.S.A.) LLC; US6316464; (2001); B1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 113305-94-5, name is 5-Aminopyrazine-2-carbonitrile, A new synthetic method of this compound is introduced below., 113305-94-5

Synthesis 1C (S)-tert-Butyl 2-((2-(5-cyanopyrazin-2-ylamino)-5-(trifluoromethyl)pyridin-4-carboxylate S)-tert-Butyl 2-((2-chloro-5-(trifluoromethyl)pyridin-4-ylamino)methyl)morpholine-4- carboxylate (4.67 g, 1 1.8 mmol), 2-amino-5-cyanopyrazine (1.98 g, 16.5 mmol), tris(dibenzylideneacetone)dipalladium(0) (0.86 g, 0.94 mmol), rac-2,2′- bis(diphenylphosphino)-1 ,1 ‘-binaphthyl (0.54 g, 0.87 mmol) and caesium carbonate (7.69 g, 23.6 mmol) were suspended in anhydrous dioxane (108 ml_) under argon. Argon was bubbled through the mixture for 30 minutes, after which the suspension was heated to 100C for 29 hours. The reaction mixture was cooled and diluted with dichloromethane, then absorbed onto silica gel. The pre-absorbed silica gel was added to a 340 g KP-Sil SNAP column which had been equilibrated with 20% ethyl acetate in hexane. Column chromatography, eluting with a gradient of 20-35% ethyl acetate in hexane, gave partially purified material as an orange gum. This was further purified by column chromatography, eluting with 20% ethyl acetate in dichloromethane, to give the title compound as a light tan powder (3.28 g, 58%). H NMR (500 MHz, CDCI3) delta 1.49 (9H, s), 2.73-2.86 (1 H, m), 2.94-3.07 (1 H, m), 3.26- 3.31 (1 H, m), 3.38-3.43 (1 H, m), 3.57-3.61 (1 H, m), 3.70-3.75 (1 H, m), 3.83-4.08 (3H, m), 5.31 (1 H, broad s), 7.12 (1 H, s), 8.13 (1 H, s), 8.23 (1 H, s), 8.57 (1 H, s), 8.87 (1 H, s). LC- MS (Agilent 4 min) Rt 2.90 min; m/z (ESI) 480 [MH+].

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; COLLINS, Ian; MATTHEWS, Thomas Peter; FARIA DA FONSECA MCHARDY, Tatiana; OSBORNE, James; LAINCHBURY, Michael; WALTON, Michael Ian; GARRETT, Michelle Dawn; WO2013/171470; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 14508-49-7, name is 2-Chloropyrazine, A new synthetic method of this compound is introduced below., Safety of 2-Chloropyrazine

[Referential Example 33] 2-Hydrazinopyrazine; [Show Image] Hydrazine monohydrate (21.80 g) was added to a solution of 2-chloropyrazine (10.44 g) in ethanol (65 ml) at room temperature, and the mixture was heated under reflux for 17 hours. After cooling with air, the reaction solvent was evaporated under reduced pressure, and benzene was added to the residue, then the insoluble content was’ removed by decantation. After evaporation of the benzene solution under reduced pressure, hexane was added to the resulting solid, and the product was collected by filtration to give the title compound (4.67 g, 47%). 1H-NMR (400 MHz, CDCl3)delta: 7.89 (1H, d, J = 2.7 Hz), 7.99-8.05 (1H, m), 8.20 (1H, d, J = 1.5 Hz). ESI-MSm/z: 111 (M+H)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; DAIICHI PHARMACEUTICAL CO., LTD.; EP1698626; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 22047-25-2, name is Acetylpyrazine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. name: Acetylpyrazine

The synthetic procedure used in this preparation is outlined below in Scheme D. To a solution of 1-pyrazin-2-yl-ethanone (2.0 g, 15.85 mmol) and ammonium acetate (19.337 g, 158.5 mmol) in methanol (50 mL) was added sodium cyanoborohydride (0.7 g, 11.1 mmol) in one portion. The reaction mixture was stirred overnight at room temperature. After removal of methanol, water (20 mL) was added to the residue and the resulting solution was basified by addition of sodium hydroxide to pH=13. The aqueous solution was extracted with dicholromethane and the combined organic phase was dried over sodium sulfate. Removal of the solvent under reduced pressure afforded 14.62 g of 1-pyrazin-2-yl-ethylamine, yield: 75%. MS (M+H)=124.

The synthetic route of 22047-25-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Broka, Chris Allen; Hawley, Ronald Charles; US2010/324056; (2010); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 642459-03-8,Some common heterocyclic compound, 642459-03-8, name is 6-Chloro-N-phenylpyrazin-2-amine, molecular formula is C10H8ClN3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 36 36A. Preparation of Phenyl- [6- (2. 2, 2-triiluoroethoxy-pyrazm-2-yl]-amine To sodium hydride (50 mg, 1.25 mmol of a 60% dispersion in oil, 1.5 equiv) in DMSO (1 ml) was added a solution of 2, 2, 2-trifluoroethanol (90 1ll, 1.25 mmol, 1.5 equiv) in DMSO (1 ml). The mixture was stirred 15 minutes and 6-chloro- (pyrazin- 2-yl) -phenyl-amine (171 mg, 0.833 mmol, 1 equiv) was added as a solution in DMSO (1 ml). The mixture was heated to 80C for 3 days. The title compound was purified by flash chromatography on silica (19 g, Si02), eluted with 25% ethyl acetate-petrol, to afford 110 mg (49%) ; LCMS 3.95 min, [M+H]”270.; 36B. Preparation of (6-Methylsulfanyl-pyrazin-2-yl)-phenyl-amine The title compound was obtained as a side product of the method of 36A and was isolated as a minor fraction of the reaction products following flash chromatography on silica (19 g, Si02), eluting with 25% ethyl acetate-petrol, to afford 3 mg (1%); LCMS 2.76 min, m/z [M+H] + 218.

The synthetic route of 642459-03-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTEX TECHNOLOGY LIMITED; WO2004/4730; (2004); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 32587-10-3, name is 3-Aminopyrazine-2-carboxamide, A new synthetic method of this compound is introduced below., Quality Control of 3-Aminopyrazine-2-carboxamide

To a stirred solution of 3-aminopyrazine-2-carboxamide (1 g, 7.24 mmol, prepared according to International Patent Application Publication No. W0201 1054922) and NaOAc (200mg, 2.44 mmol) in HOAc (15 mE) was added Br2 (0.45 mE) dropwise at 0C for 1 hour, and then it was stirred at 50C for 8 hours. After the mixing, it was poured into ice-water and filtrated, the crude product of 3-amino-6-bromopyrazine-2-carboxamide as brown solid (1.5 g, yield: 95%) was obtained. ?H-NMR (DMSO-d6, 400 MHz) 8.30 (s, 1H), 7.93 (s, 2H), 7.66 (s, 2H). MS (M+H):217/219.

The synthetic route of 32587-10-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; DAI, Xing; LIU, Hong; PALANI, Anandan; HE, Shuwen; NARGUND, Ravi; XIAO, Dong; ZORN, Nicolas; DANG, Qun; MCCOMAS, Casey C.; PENG, Xuanjia; LI, Peng; SOLL, Richard; WO2014/205593; (2014); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem