Category: 89123-58-0

Adding a certain compound to certain chemical reactions, such as: 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 89123-58-0, name: 5-Bromopyrazine-2,3-diamine

(b) Add Compound II (7.8 g, 41.3 mmol, 1 eq) to a 250 mL vial.80 mL of DMF (ie, N,N-dimethylformamide) was added under constant stirring to dissolve Compound II.Triethyl orthoformate (7.34 g, 49.5 mmol, 1.2 eq) was added dropwiseAnd 20ml formic acid (about 1 drop / sec),Heating under reflux conditions for 24 h under nitrogen protection (at this time, TLC detection is basically free of raw materials);Unscrew the solvent and dissolve in methanol.Purification by silica gel column chromatography gave 5 g of compound III.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromopyrazine-2,3-diamine, and friends who are interested can also refer to it.

Reference:
Patent; Suzhou Derivative Biological Technology Co., Ltd.; Liu Ke; (6 pag.)CN108395436; (2018); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 89123-58-0, The chemical industry reduces the impact on the environment during synthesis 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, I believe this compound will play a more active role in future production and life.

Oxalyl chloride (3ml) was added to a solution of 5-({5-chloro-2-[(2-methylpropyl)oxy]- phenyl}methyl)-2-furancarboxylic acid (3.09g, lOmmol) and one drop of DMF in dichloromethane (30ml) and left at room temperature for one hour. The resulting solution was evaporated to dryness, azeotroped with toluene and the residue dissolved in dichloromethane (15ml) and added dropwise to a stirred solution of 2,3-diamino-5- bromopyrazine (2.08g, 11mmol) and 4-dimethyaminopyridine (100mg, 0.82mmol) in pyridine (20ml) and stirred for one hour. The solution was evaporated and the residue dissolved in ether/water. The organic phase was dried with magnesium sulphate, evaporated and chromatographed on silica gel eluting with ethyl acetate/hexane (15:85) to give 3.35g of white solid which was dissolved in acetic acid (40ml) and stirred and refluxed for 5 days. The resulting solution was evaporated, dissolved in ethyl acetate and washed with 2M sodium hydroxide solution. The organic phase was dried with magnesium sulphate, evaporated and purified by flash chromatography on silica eluting with ethyl acetate/hexane (1 :3) to give a pale yellow solid. A sample was dissolved in methanol/dichloromethane and hydrogen chloride in ether (1ml) was added. The solvent was evaporated and the residue triturated with ether and filtered off to give the title compound as a solid. LC/MS: Rt=3.67, [MH]+ 463.11 , 464.16.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromopyrazine-2,3-diamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GLAXO GROUP LIMITED; WO2006/114272; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 89123-58-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 89123-58-0 name is 5-Bromopyrazine-2,3-diamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 52A 5-[1-(2-Fluorobenzyl)-1H-pyrazolo[3,4-b]pyridin-3-yl]pyrazine-2,3-diamine Under argon, 425 mg (1.20 mmol) of the compound from Example 33A were initially charged in 1,4-dioxane (11 ml), and the reaction mixture was purged with argon for 10 min. Thereafter, 0.91 ml (1.80 mmol) of hexabutylditin and 250 mg (1.32 mmol) of 2,3-diamino-5-bromopyrazine were added. Subsequently, 422 mg (0.60 mmol) of bis(triphenylphosphine)palladium(II) chloride were added and the reaction mixture was heated to reflux overnight. Thereafter, the mixture was cooled to RT and filtered through Celite, and the filtrate was concentrated. The residue was admixed with methanol, and the solids were filtered off and discarded. The filtrate was taken up in methanol-dichloromethane, absorbed onto diatomaceous earth and purified on silica gel (eluent: cyclohexane-ethyl acetate 2:1, 1:1). This gave 151 mg (31% purity, 11% of theory) of the title compound. The crude product was converted further without further purification. LC-MS (method 3): Rt=0.91 min MS (ESIpos): m/z=336 (M+H)+

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromopyrazine-2,3-diamine, and friends who are interested can also refer to it.

Reference:
Patent; BAYER INTELLECTUAL PROPERTY GMBH; Follmann, Markus; Stasch, Johannes-Peter; Redlich, Gorden; Ackerstaff, Jens; Griebenow, Nils; Knorr, Andreas; Wunder, Frank; Li, Volkhart Min-Jian; Baerfacker, Lars; Weigand, Stefan; US2014/148433; (2014); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, A new synthetic method of this compound is introduced below., Recommanded Product: 89123-58-0

The compound 5-bromo-2,3-diaminopyrazine 1b (12.0 g, 63.8 mmol) was added to triethyl orthoformate (94.4 g, 638 mmol), and the reaction mixture was reacted at 145 C overnight. Complete the reaction monitored by TLC, cooled and concentrated by column (v / v, dichloromethane / methanol = 100: 1-30: 1) to give the title compound 1c (10.0g, 50.5mmol), in a yield of 79.4%

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Shanghai Huahuituo Pharmaceutical Technology Co., Ltd.; Zhejiang Huahai Pharmaceutical Co., Ltd.; Xu Xin; Zhang Tian; Li Yunfei; Wang Guan; Zhu Weibo; Li Qiang; Qu Minkai; Zhang Linli; Song Jinqian; Liu Lei; Chen Haiji; Liu Qiang; Wang Yijin; Ge Jian; (67 pag.)CN109535164; (2019); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 89123-58-0,Some common heterocyclic compound, 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, molecular formula is C4H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(3-((tert-butyldimethylsilyl)oxy)-4-cyclohexyl-2-fluorophenyl)boronic acid (0.821 g, 2.33 mmol), 5-bromopyrazin-2-amine (0.40 g, 2.3 mmol), K2CO3 (0.659 g, 4.77 mmol), Pd(dppf)Cl2.CH2Cl2 (0.086 g, 0.12 mmol), deoxygenated toluene (10 mL), and deoxygenated deionized water (10 mL) was heated for 16 hours at 80 Celsius. The reaction mixture was then cooled to rt, diluted with dichloromethane (25 mL), and washed with brine (2×25 mL). The organic layer was dried over MgSO4, filtered, and concentrated to dryness to yield the title compound (0.936 g, 100%) which was used without purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromopyrazine-2,3-diamine, its application will become more common.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; Eccles, Wendy; Fitzgerald, Anne E.; Hack, Michael D.; Hawryluk, Natalie A.; Jones, William M.; Keith, John M.; Krawczuk, Paul; Lebsack, Alec D.; Liu, Jing; Mani, Neelakandha S.; McClure, Kelly J.; Meduna, Steven P.; Rosen, Mark D.; US2014/221310; (2014); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 89123-58-0,Some common heterocyclic compound, 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, molecular formula is C4H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Zn(OAc)2·2H2O (5.0 mol%) was transferred to a 100 mL autoclavereactor equipped with an overhead stirrer and an automatic temperature-control system. The appropriate benzene-1,2-diamine 1 (2 mmol), DMF (10.0 mmol), and PMHS (5.0 mmol)were successively introduced. The reactor was sealed, flushedthree times with N2 (10 atm), and heated to the required temperature with vigorous stirring (600 rpm). During the course ofthe reaction, an increase of pressure was observed, due to thegeneration of Me2NH and HCHO at 120 C.15 (For this reason, the protocol needs to be performed in a sealed high-pressurereactor.) When the reaction was complete, the autoclave wascooled to r.t., and the pressure generated during the reactionwas carefully released. Basic hydrolysis was then carried out atr.t. for 30 min to remove unreacted PMHS from the mixture.13aThe mixture was then extracted with EtOAc (3 × 20 mL). Thecombined organic layers were dried (Na2SO4), filtered, and concentrated in vacuo. The crude products were further purified bycolumn chromatography [silica gel (100-200 mesh), PE-EtOAc(20:4 to 10:2)]. The spectroscopic data for the products wereconsistent with those reported in the literature.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromopyrazine-2,3-diamine, its application will become more common.

Reference:
Article; Nale, Deepak B.; Bhanage, Bhalchandra M.; Synlett; vol. 26; 20; (2015); p. 2835 – 2842;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 89123-58-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 89123-58-0 name is 5-Bromopyrazine-2,3-diamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 2; A solution of 2 (1.05 g, 5.52 mmol) in acetic acid diethoxy methyl ester (5 mL) was heated at 130 C. for 3 h. After completion of reaction (reaction progress was monitored by TLC), the reaction mixture was cooled to 25 C. and diluted with hexane. Hexane layer was decanted and crude reaction mass was washed with hexane (3×20 mL) to afford 3 as crude a yellow solid (900 mg, 81%), which was directly used in the next step without further purification. MS m/z (ES): 198 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromopyrazine-2,3-diamine, and friends who are interested can also refer to it.

Reference:
Patent; de Vicente Fidalgo, Javier; Hermann, Johannes Cornelius; Lemoine, Remy; Li, Hongju; Lovey, Allen John; Sjogren, Eric Brian; Soth, Michael; US2011/59118; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 89123-58-0, These common heterocyclic compound, 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-Bromopyrazine-2,3-diamine (27) was preparedfrom 2-amino-3,5-dibromopyrazine and NH4OH (25%) in sealedtube according to lit.33 1H-NMR delta ppm (CD3OD): 4.90 (s,4H,NH2),7.24 (s,2H,H-5,6). 13C-NMR (CD3OD): 123.3, 129.8, 144.3, 145.9. MS(ESI+) m/z: 189(M + H, 100%), 191(M + H+2, 97%). 27 (0.303 g,1.6 mmol) in EtOH (10 mL) was reduced by hydrogenation using 40psi of H2 and 10% Pd-C (15 mg) for 8 h. The catalyst was filtered ona bed of Celite, the filtrate was concentrated in vacuo. Purplecolored powder 28 were used for the further steps without purification.1H-NMR delta ppm (CD3OD): 4.90 (s,4H,NH2), 7.24 (s,2H, H-5,6). 13C-NMR (CD3OD): 123.7, 145.1. MS (ESI) m/z: 110(M + H,100%). 29 was prepared from 28 (0.11 g) and Na2S2O5 adduct of 4-(morpholin-4-ylcarbonyl) benzaldehyde (0.323 g) as described ingeneral method. Resulting precipitate (0.155 g) was purified withcolumn chromatography using CH2Cl2: MeOH (95 : 5) as eluant,yield 0.056 g, (18%), mp > 300 C. 1H-NMR delta ppm (DMSO-d6+D2O):3.27-3.61 (m,8H), 7.62 (d,2H,J – 8.4 Hz), 8.33 (d,2H,J – 8.4 Hz), 8.40(s,2H,H-5,6). 13C-NMR (DMSO-d6+D2O): 66.0, 127.3, 127.8, 129.9,138.2, 139.0, 154.7, 168.2. MS (ESI) m/z: 310(M + H, 100%). AnalCalcd for C16H15N5O2H2O: C, 58.70; H, 5.23; N, 21.39. Found: C,58.97; H, 5.01; N, 20.91.

Statistics shows that 5-Bromopyrazine-2,3-diamine is playing an increasingly important role. we look forward to future research findings about 89123-58-0.

Reference:
Article; Karaaslan, Cigdem; Doganc, Fatima; Alp, Mehmet; Koc, Asli; Karabay, Arzu Zeynep; Goeker, Hakan; Journal of Molecular Structure; vol. 1205; (2020);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 89123-58-0,Some common heterocyclic compound, 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, molecular formula is C4H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 50 mg (0.27 mmol) of 5-bromopyrazine-2,3-diamine in 2 mL of a 10: 1 solution of methanol/acetic acid was added 0.046 mL (0.40 mmol) of glyoxal solution (40 wt. % in water) and the resulting solution was stirred at 50 0C for 4 h. The reaction mixture was cooled to ambient temperature, diluted with 10 mL of ethyl acetate and washed with saturated aqueous sodium bicarbonate solution, and saturated aqueous brine (5 mL each). The organic phase was then dried over anhydrous sodium sulfate, filtered, and evaporated in vacuo to yield the title compound as a tan crystalline solid which was used without further purification. LC/MS 211.1, 213.1 (M+ 1, M+3).

The synthetic route of 89123-58-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2006/39325; (2006); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 89123-58-0,Some common heterocyclic compound, 89123-58-0, name is 5-Bromopyrazine-2,3-diamine, molecular formula is C4H5BrN4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The title compound of PREPARATION 45 (240 mg, 1.2 mmol) and 1,1?- carbonyldiimidazole (240 mg, 1.5 mmol) were dissolved in 3 ml butyronitrile and the mixture was stirred in a sealed microwave tube for 15 mm at room temperature affording a thick white suspension. The title compound of PREPARATION 73 (220 mg,1.2 mmol) was added and the reaction was heated 18000 under microwave irradiationfor 2 h. The mixture was allowed to cool and was evaporated under reduced pressure. The residue was purified by flash chromatography (methanol-dichloromethane gradient, 0:100 rising to 10:90) to give 240 mg (0.66 mmol, 58% yield) of the title compound as a white solid. Purity 97%.1H NMR (400 MHz, DMSO-d6) oe ppm 8.54 (s, 1H), 8.44 (s, 1H), 8.27 (s, 1H), 5.40 (s,2H), 2.50 (s, 3H).UPLC/MS (3 mm) retention time 0.98 mm.LRMS: mlz 361, 363 (M+1, 1 xBr)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Bromopyrazine-2,3-diamine, its application will become more common.

Reference:
Patent; ALMIRALL, S.A.; AIGUADE BOSCH, Jose; CONNOLLY, Stephen; EASTWOOD, Paul Robert; ROBERTS, Richard Spurring; SEVILLA GOMEZ, Sara; CATURLA JAVALOYES, Juan Francisco; (110 pag.)WO2017/64068; (2017); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem