Category: 767340-03-4

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, A new synthetic method of this compound is introduced below., SDS of cas: 767340-03-4

Step C: Preparation of (2R)-4-OXO-4-F3- (TRIFLUOROMETHYL)-5, 6- DIHYDROF L, 2. 41TRIAZOLOR4, 3-ALPVRAZIN-7 (8H)-YLL-1-(24*5- TRIFLUOROPHENYL) butan-2-amine (2-5) Into a 500 ml flask were charged chloro (1, 5-cyclooctadiene) rhodium (I) dimer {[Rh (cod) CI] 2} (292 mg, 0.59 mmol) and (R, S) t-butyl Josiphos (708 mg, 1.31 mmol) under a nitrogen atmosphere. Degassed MEOH was then added (200 ML) and the mixture was stirred at room temperature for 1 h. Into a 4 L HYDROGENATOR was charged the enamine amide 2-4 (118 g, 0.29 mol) along with MEOH (1 L). The slurry was degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 200 psi hydrogen gas at 50 C for 13 h. Assay yield was determined by HPLC to be 93% and optical purity to be 94% ee. The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MEOH) was concentrated and switched to methyl t-butyl ether (MTBE) (45 mL). Into this solution was added aqueous H3PO4 solution (0.5 M, 95 mL). After separation of the layers, 3N NAOH (35 ML) was added to the water layer, which was then extracted with MTBE (180 mL + 100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 C). The hot toluene solution was then allowed to cool to 0 C slowly (5-10 h). The crystals were isolated by filtration (13 g, yield 72%, 98-99% ee); m. p. 114.1-115. 7 C. 1H NMR (300 MHZ, CD3CN) : 5 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2. 68 (m), 2.49 (m), 1.40 (bs). Compound 2-5 exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon-13 signals are not well resolved: 13C NMR (CD3CN) : 8 171.8, 157.4 (ddd, JCF = 242.4, 9.2, 2.5 HZ), 152.2 (major), 151.8 (minor), 149.3 (DDD ; JCF = 246.7, 14.2, 12.9 Hz), 147.4 (ddd, JCF = 241.2, 12.3, 3.7 Hz), 144.2 (q, JcF = 38. 8 Hz), 124.6 (ddd, JCF = 18. 5,5. 9,4. 0 Hz), 120.4 (dd, JCF = 19.1, 6.2 Hz), 119.8 (q, JCF = 268. 9 Hz), 106.2 (dd, JCF = 29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38. 5 (minor), 36.9. The following high-performance liquid chromatographic (HPLC) conditions were used to determine percent conversion to product: Column: Waters Symmetry C18, 250 mm x 4.6 mm Eluent: Solvent A: 0.1 vol% HC104/H20 Solvent B : acetonitrile Gradient: 0 min 75% A: 25% B 10 min 25% A: 75% B 12. 5 MIN 25% A: 75% B 15 MIN 75% A: 25% B Flow rate: 1 ML/MIN Injection Vol.: 10 uL UV detection: 210 nm Column temp.: 40 C Retention times: compound 2-4: 9.1 min compound 2-5 : 5.4 min tBu Josiphos: 8.7 min The following high-performance liquid chromatographic (HPLC) conditions were used to determine optical purity: Column: Chirapak, AD-H, 250 mm x 4.6 mm Eluent: Solvent A: 0.2 vol. % diethylamine in heptane Solvent B: 0.1 vol% diethylamine in ethanol Isochratic Run Time: 18 min Flow RATE : 0. 7 mL/min Injection Vol.: 7 uL W detection: 268 nm Column temp.: 35 C Retention times: (-amine 2-5: 13.8 min (-amine : 11.2 min EXAMPLE 2 Methyl (3S)-3-AMINO-3-(6-METHOXYPERIDIN-3-YL) PROPANOATE (3-2) Into a 7 mL vial were charged chloro (1, 5-CYCLOOCTADIENE) rhodium (I) dimer { [Rh (cod) CI] 2} (14.2 mg, 0.029 mmol) and (R, S)-t-Bu Josiphos (31.3 mg, 0.058 mmol) under a nitrogen atmosphere. Degassed methanol (1 mL) was then added and the catalytic complex was stirred for 45 min at room temperature. In a separate 2-mL vial, the enamine ester 3-1 (0.1 g, 0.5 mmol) was dissolved in 0.9 mL distilled 2,2, 2-trifluoroethanol. To the same vial 0.1 RNL of the prepared catalyst solution was added resulting in 1 mol% catalyst loading and a 2,2, 2- trifluoroethanol/methanol mixture of 90/10. The hydrogenation vial was then sealed and transferred into the hydrogenation bomb under nitrogen. After degassing three times with hydrogen, the enamine ester was hydrogenated under 90-psig-hydrogen gas at 50 C for 13.5 h. Assay yield was determined by HPLC to be 88% and optical purity to be 89% ee. 1H-NMR (400 MHz, CDCl3) : 8 1.81 (bs, 2H), 2.64 (m, 2H), 3.68 (s, 3H), 3.91 (s, 3H), 4.4 (dd, 1H), 6.72 (d, 1H), 7.62 (dd, 1H), and 8. 11 (s, 1H) ppm.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; MERCK & CO. INC.; WO2004/85378; (2004); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 767340-03-4, A common heterocyclic compound, 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, molecular formula is C16H13F6N5O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Into a 500 ml flask were charged chloro(l,5-cyclooctadiene)rhodiurn(I) dimer{[Rh(cod)Cl]2}(292 mg, 1.18 mmol) and (R,S) *-butyl Josiphos (708 mg, 1.3 mmol) under a nitrogen atmosphere. Degassed MeOH was then added (200 mL) and the mixture was stirred at room temperature for 1 h. Into a 4 L hydrogenator was charged the enamine amide 24 (118 g, 0.29 mol) along with MeOH (1 L). The slurry was degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 200 psi hydrogen gas at 50 0C for 13 h. Assay yield was determined by EtaPLC to be 93% and optical purity to be 94% ee. The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MeOH) was concentrated and switched to methyl t- butyl ether (MTBE) (45 mL). Into this solution was added aqueous Eta3PO4 solution (0.5 M, 95 mL).After separation of the layers, 3NNaOH (35 mL) was added to the water layer, which was then extracted with MTBE (180 mL + 100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 0C). The hot toluene solution was then allowed to cool to 0 0C slowly (5 – 10 h). The crystals were isolated by filtration (98 – 99% ee); m.p. 114.1 – 115.7 0C. lH NMR (300 MHz, CD3CN): b 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68(m), 2.49 (m), 1.40 (bs).Compound 2^5 exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon-13 signals are not well resolved:13C NMR (CD3CN): delta 171.8, 157.4 (ddd , JCF = 242.4, 9.2, 2.5 Hz), 152.2 (major), 151.8 (minor), 149.3(ddd; JCF = 246.7, 14.2, 12.9 Hz), 147.4 (ddd, ^ = 241.2, 12.3, 3.7 Hz), 144.2 (q, JCF = 38.8 Hz), 124.6 (ddd , JCF= 18.5, 5.9, 4.0 Hz), 120.4 (dd , JCF = 19.1, 6.2 Hz), 119.8 (q, JCF = 268.9 Hz), 106.2 (dd , JCF = 29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9.

The synthetic route of 767340-03-4 has been constantly updated, and we look forward to future research findings.

Related Products of 767340-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

Step C: Preparation of r2RV4-oxo-4-f3-(‘trifluoromethyl)-5.6-dihvdrori,2,41triazolor4.3- a1pyrazin-7(8H)-yl]-l -(2 A5-trifluorophenv0butan-2-amine (2-5) Into a 250 ml flask were charged chloro(l,5-cyclooctadiene)rhodium(I) dimer{[Rh(cod)Cl]2}(46 mg, 0.093 mmol) and (R,S) t-butyl Josiphos (106 mg, 0.196 mmol), ammonium chloride (12.5 mg, 0.234 mmol), and enamine amide (25 g, 61.8 mmol) under a nitrogen atmosphere. Degassed MeOH was then added (225 mL) and the mixture was stirred at room temperature for 1 h. The slurry was transferred into a hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 100 psi hydrogen gas at 50 0C for 18 h. Assay yield was determined by EtaPLC to be 97% and optical purity to be 94% ee.The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MeOH) was concentrated and switched to methyl t- butyl ether (MTBE) (45 mL). Into this solution was added aqueous Eta3PO4 solution (0.5 M, 95 mL). After separation of the layers, 3NNaOH (35 mL) was added to the water layer, which was then extracted EPO with MTBE (180 mL + 100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 0C). The hot toluene solution was then allowed to cool to 0 0C slowly (5 – 10 h). The crystals were isolated by filtration (98 – 99% ee); m.p. 114.1 – 115.7 0C. lH NMR (300 MHz, CD3CN): delta 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68 (m), 2.49 (m), 1.40 (bs).Compound 2^5 exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon- 13 signals are not well resolved:13C NMR (CD3CN): delta 171.8, 157.4 (ddd , JCF = 242.4, 9.2, 2.5 Hz), 152.2 (major), 151.8 (minor), 149.3(ddd; JCF = 246.7, 14.2, 12.9 Hz), 147.4 (ddd, JCF = 241.2, 12.3, 3.7 Hz), 144.2 (q, JCF = 38.8 Hz), 124.6 (ddd , JCF= 18.5, 5.9, 4.0 Hz), 120.4 (dd , JCF = 19.1, 6.2 Hz), 119.8 (q, JCF = 268.9 Hz), 106.2 (dd , JCF = 29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9.

The synthetic route of (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2006/81151; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, belongs to Pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 767340-03-4, SDS of cas: 767340-03-4

To degaussed 2,2,2-trifluoroethanol (TFE) (30 mL) were added Rhodium(I) chloride 1,5- cycloocatadiene complex (18.3 mg, 0.05percent) and (R)-(-)-l-[(S)-2- diphenylphosphino)ferrocenyl]ethyl di-tert-butylphosphine (44.2 mg, 0.11percent). The solution was stirred at room temperature, degaussed three times, and then stirred for one hour at room temperature.To 250 ml hydrogenator were added (Z)-3-amino-l-(3-(trifluoromethyl)-5,6-dihydro- [l,2,4]triazolo[4,3-a]pyrazyn-7(8H)-yl)-4-(2,4,5-trifluorophenyl)but-2-en-l-one (30 gr, 1 equivalent) and TFE (120 ml) at room temperature and the mixture was washed three times with nitrogen gas. The catalyst solution was added and the clear solution was washed three times with nitrogen gas and then with hydrogen gas. The mixture remained under hydrogen at constant pressure of 5 bar and heated to 550C. The mixture was stirred at 550C for 26 hours to obtain Sitagliptin base in TFE solution (optical purity by HPLC 76.9percent, purity by HPLC 91.5percent)Two reaction mixtures which were obtained according to the above procedure were combined and the solution was divided to 10 parts.7 parts of the solution, each contained ca~ 6 gr Sitagliptin were concentrated and Sitagliptin base was precipitated by addition of MTBE then filtrated by vacuum filtration. The combined mother liqueur from the crystallization experiments was concentrated. The residue was dissolved in isopropanol (40 mL) at room temperature, heated to 50¡ãC. A solution of phosphoric acid (85percent, 1.7 mL, ca ~1 eq) in isopropanol (20 mL) was added and the mixture kept stirring at 50¡ãC for one hour, then cooled gradually to 25 ¡ãC, and stirred at 25¡ãC over night.The product was isolated by vacuum filtration and dried at 40¡ãC vacuum oven over night to obtain Sitagliptin phosphate crystalline form VI (optical purity by HPLC 51.8percent, purity by HPLC 99.20percent).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2009/120746; (2009); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine belongs to Pyrazines compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C16H13F6N5O

Into a 500 ml flask were charged chloro(l,5-cyclooctadiene)rhodium(I) dimer {[Rh(cod)Cl]2}(292 mg, 1.18 mmol) and (R,S) t-butyl Josiphos (708 mg, 1.3 mmol) under a nitrogen atmosphere. Degassed MeOH was then added (200 mL) and the mixture was stirred at room temperature for 1 h. Into a 4 L hydrogenator was charged the enamine amide 2j4 (118 g, 0.29 mol) along with MeOH (1 L). The slurry was degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 200 psi hydrogen gas at 50 0C for 13 h. Assay yield was determined by EtaPLC to be 93% and optical purity to be 94% ee.The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MeOH) was concentrated and switched to methyl t- buryl ether (MTBE) (45 mL). Into this solution was added aqueous Eta3PO4 solution (0.5 M, 95 mL).After separation of the layers, 3NNaOH (35 mL) was added to the water layer, which was then extracted with MTBE (180 mL + 100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 0C). The hot toluene solution was then allowed to cool to 0 0C slowly (5 – 10 h). The crystals were isolated by filtration (13 g, yield 72%, 98 – 99% ee); m.p. 114.1 – 115.7 0C. lHNMR (300 MHz, CD3CN): delta 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68(m), 2.49 (m), 1.40 (bs). Compound 2^ exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon- 13 signals are not well resolved:13c NMR (CD3CN): delta 171.8, 157.4 (ddd , JCF = 242.4, 9.2, 2.5 Hz), 152.2 (major), 151.8 (minor), 149.3(ddd; JCF = 246.7, 14.2, 12.9 Hz), 147.4 (ddd, JCF = 241.2, 12.3, 3.7 Hz), 144.2 (q, JCF = 38.8 Hz), 124.6 (ddd , JCF= 18.5, 5.9, 4.0 Hz), 120.4 (dd , JCF= 19.1, 6.2 Hz), 119.8 (q, JCF = 268.9 Hz), 106.2 (dd , JCF = 29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9.

The synthetic route of 767340-03-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; WO2007/50485; (2007); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 767340-03-4, The chemical industry reduces the impact on the environment during synthesis 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, I believe this compound will play a more active role in future production and life.

Into a 500 ml flask were charged chloro(1,5-cyclooctadiene)rhodium(I) dimer {[Rh(cod)Cl]2}(292 mg, 1.18 mmol) and (R,S) t-butyl Josiphos (708 mg, 1.3 mmol) under a nitrogen atmosphere. Degassed MeOH was then added (200 mL) and the mixture was stirred at room temperature for 1 h. Into a 4 L hydrogenator was charged the enamine amide 24 (118 g, 0.29 mol) along with MeOH (1 L). The slurry was degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 200 psi hydrogen gas at 50 C. for 13 h. Assay yield was determined by HPLC to be 93% and optical purity to be 94% ee. The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MeOH) was concentrated and switched to methyl t-butyl ether (MTBE) (45 mL). Into this solution was added aqueous H3PO4 solution (0.5 M, 95 mL). After separation of the layers, 3N NaOH (35 mL) was added to the water layer, which was then extracted with MTBE (180 mL+100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 C). The hot toluene solution was then allowed to cool to 0 C. slowly (5-10 h). The crystals were isolated by filtration (13 g, yield 72%, 98-99% ee); m.p. 114.1-115.7 C. 1H NMR (300 MHz, CD3CN): delta7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68 (m), 2.49 (m), 1.40 (bs). Compound 2-5 exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon-13 signals are not well resolved: 13C NMR (CD3CN): delta171.8, 157.4 (ddd, JCF=242.4,9.2,2.5 Hz), 152.2 (major), 151.8 (minor), 149.3 (ddd; JCF=246.7, 14.2, 12.9 Hz), 147.4 (ddd, JCF=241.2, 12.3, 3.7 Hz), 144.2 (q, JCF=38.8 Hz), 124.6 (ddd, JCF=18.5, 5.9, 4.0 Hz), 120.4(dd, JCF=19.1, 6.2 Hz), 119.8 (q,JCF=268.9 Hz), 106.2 (dd, JCF=29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Thornberry, Nancy A.; Kaufman, Keith D.; US2006/270722; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, This compound has unique chemical properties. The synthetic route is as follows., 767340-03-4

Ligand Metal precursor percentyieldb percent eec config. 15 3 A [Rh(cod) 2]BF4 77 88 R 4 B [Rh(cod)Cl]2 58 76 R 5 C [Rh(cod)Cl]2 15 78 a: Reaction conditions: in TFE, 5 molpercent metal precursor, 5 molpercent ligand, 90 psig H2, 50 ¡ãC, 18 h; b: Assayed by HPLC; c: Assayed by chiral HPLC using a AS-RH chiral column eluting with 20percent acetonitrile/water as the mobile phase.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; MERCK & CO., INC.; SOLVIAS AG; WO2005/97733; (2005); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, belongs to Pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 767340-03-4

Into a 500 ml flask were charged chloro(l,5-cyclooctadiene)rhodium(I) dimer {[Rh(cod)Cl]2}(292 mg, 1.18 mmol) and (R,S) f-butyl Josiphos (708 mg, 1.3 mmol) under a nitrogen atmosphere. Degassed MeOH was then added (200 mL) and the mixture was stirred at room temperature for 1 h. Into a 4 L hydrogenator was charged the enamine amide 2Lambda (118 g, 0.29 mol) along with MeOH (1 L). The slurry was degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 200 psi hydrogen gas at 50 0C for 13 h. Assay yield was determined by EtaPLC to be 93% and optical purity to be 94% ee.The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MeOH) was concentrated and switched to methyl t- butyl ether (MTBE) (45 mL). Into this solution was added aqueous Eta3PO4 solution (0.5 M, 95 mL).After separation of the layers, 3NNaOH (35 mL) was added to the water layer, which was then extracted with MTBE (180 mL + 100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 0C). The hot toluene solution was then allowed to cool to 0 0C slowly (5 – 10 h). The crystals were isolated by filtration (13 g, yield 72%, 98 – 99% ee); m.p. 114.1 – 115.7 0C. lH NMR (300 MHz, CD3CN): delta 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68(m), 2.49 (m), 1.40 (bs).Compound 2-5 exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon-13 signals are not well resolved: 13c NMR (CD3CN): delta 171.8, 157.4 (ddd , JCF = 242.4, 9.2, 2.5 Hz), 152.2 (major), 151.8 (minor), 149.3(ddd; JCF = 246.7, 14.2, 12.9 Hz), 147.4 (ddd, JCF = 241.2, 12.3, 3.7 Hz), 144.2 (q, JCF = 38.8 Hz), 124.6 (ddd , JCF = 18.5, 5.9, 4.0 Hz), 120.4 (dd , JCF = 19.1, 6.2 Hz), 119.8 (q, JCF = 268.9 Hz), 106.2 (dd , JCF = 29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9. The crystalline free base 2^ can also be isolated as follows:(a) The reaction mixture upon completion of the hydrogenation step is charged with 25 wt% of Ecosorb C-941. The mixture is stirred under nitrogen for one h and then filtered. The cake is washed with 2L/kg of methanol. Recovery of free base is about 95% and optical purity about 95% ee.(b) The freebase solution in methanol is concentrated to 3.5-4.0 L/kg volume (based on free base charge) and then solvent-switched into isopropanol (IPA) to final volume of 3.0 L/kg IPA.(c) The slurry is heated to 40 0C and aged 1 h at 4O0C and then cooled to 25 0C over 2 h. EPO (d) Heptane (7L/kg) is charged over 7 h and the slurry stirred for 12 h at 22-250C. The supernatant concentration before filtering is 10-12 mg/g.(e) The slurry is filtered and the solid washed with 30% IPA/heptane (2L/kg).(f) The solid is dried in a vacuum oven at 40 0C. (g) The optical purity of the free base is about 99% ee.

Statistics shows that 767340-03-4 is playing an increasingly important role. we look forward to future research findings about (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine.

Reference:
Patent; MERCK & CO., INC.; WO2006/33848; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

A common compound: 767340-03-4, name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, belongs to Pyrazines compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 767340-03-4

Into a 500 ml flask were charged chloro(l,5-cyclooctadiene)rhodium(I) dimer{[Rh(cod)Cl]2}(292 mg, 1.18 mmol) and (R,S) f-butyl Josiphos (708 mg, 1.3 mmol) under a nitrogen atmosphere. Degassed MeOH was then added (200 mL) and the mixture was stirred at room temperature for 1 h. Into a 4 L hydrogenator was charged the enamine amide 2^4 (118 g, 0.29 mol) along with MeOH (1 L). The slurry was degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 200 psi hydrogen gas at 50 0C for 13 h. Assay yield was determined by EtaPLC to be 93% and optical purity to be 94% ee. The optical purity was further enhanced in the following manner. The methanol solution from the hydrogenation reaction (18 g in 180 mL MeOH) was concentrated and switched to methyl t- butyl ether (MTBE) (45 mL). Into this solution was added aqueous Eta3PO4 solution (0.5 M, 95 mL).After separation of the layers, 3NNaOH (35 mL) was added to the water layer, which was then extracted with MTBE (180 mL + 100 mL). The MTBE solution was concentrated and solvent switched to hot toluene (180 mL, about 75 0C). The hot toluene solution was then allowed to cool to 0 0C slowly (5 – 10 h). The crystals were isolated by filtration (13 g, yield 72%, 98 – 99% ee); m.p. 114.1 – 115.7 0C. EPO lH NMR (300 MHz, CD3CN): delta 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68(m), 2.49 (m), 1.40 (bs).Compound Z1I exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon- 13 signals are not well resolved: 13c NMR (CD3CN): delta 171.8, 157.4 (ddd , JCF = 242.4, 9.2, 2.5 Hz), 152.2 (major), 151.8 (minor), 149.3(ddd; JCF = 246.7, 14.2, 12.9 Hz), 147.4 (ddd, /CF = 241.2, 12.3, 3.7 Hz), 144.2 (q, JCF= 38.8 Hz), 124.6 (ddd , JCF= 18.5, 5.9, 4.0 Hz), 120.4 (dd , JCF= 19.1, 6.2 Hz), 119.8 (q, JCF= 268.9 Hz), 106.2 (dd , /CF = 29.5, 20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 767340-03-4, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; MERCK & CO., INC.; WO2006/119260; (2006); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

767340-03-4, Name is (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine, 767340-03-4, belongs to Pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

Into a flask was charged [Rh(cod)2]OTf (0.1 mmol) and (S) -Cy2-p-Tol-Biphemp (Ligand E) (0.1 mmol) under a nitrogen atmosphere. Degassed trifluoroethanol was then added (20 mL) and the mixture was stirred at room temperature for 1 h. Into a hydrogenator was charged the enamine amide 2-4 (1 mmol) and then degassed. The catalyst solution was then transferred to the hydrogenator under nitrogen. After degassing three times, the enamine amide was hydrogenated under 100 psig hydrogen gas at 20 ¡ãC for 20 h (94percent assay yield, 98percent ee). 1H NMR (300 MHz, CD3CN): No. 7.26 (m), 7.08 (m), 4.90 (s), 4.89 (s), 4.14 (m), 3.95 (m), 3.40 (m), 2.68 (m), 2.49 (m), 1.40 (bs). Compound 2-5 exists as amide bond rotamers. Unless indicated, the major and minor rotamers are grouped together since the carbon-13 signals are not well resolved: 13C NMR (CD3CN): 8 171.8,157.4 (ddd , JCF = 242.4,9.2, 2.5 Hz), 152.2 (major), 151.8 (minor), 149.3 (ddd; JCF = 246.7, 14.2,12.9 Hz), 147.4 (ddd, JCF = 241.2, 12.3, 3.7 Hz), 144.2 (q, JCF = 38.8 Hz), 124.6 (ddd , JCF = 18.5, 5.9, 4.0 Hz), 120.4 (dd , JCF = 19.1, 6.2 Hz), 119.8 (q, JCF = 268.9 Hz), 106.2 (dd , JCF = 29.5,20.9 Hz), 50.1, 44.8, 44.3 (minor), 43.2 (minor), 42.4, 41.6 (minor), 41.4, 39.6, 38.5 (minor), 36.9.; The following high-performance liquid chromatographic (HPLC) conditions were used to determine percent conversion to product: Column: Waters Symmetry C18, 250 mm x 4.6 mm Eluent: Solvent A: 0.1 vol percent HC104/H20 Solvent B: acetonitrile Gradient: 0 min 75percent A : 25percent B 10 min 25percent A : 75percent B 12.5 min 25percent A: 75percent B 15 min 75percent A : 25percent B Flow rate: 1 mL/min Injection Vol. : 10 muL UV detection: 210 nm Column temp.: 40 ¡ãC Retention times: compound 2-4: 9.1 min compound 2-5: 5.4 min The following high-performance liquid chromatographic (HPLC) conditions were used to determine optical purity: Column: Chirapak, AD-H, 250 mm x 4.6 mm Eluent: Solvent A: 0.2 vol.percent diethylamine in heptane Solvent B: 0.1 vol percent diethylamine in ethanol Isochratic Run Time: 18 min Flow rate: 0.7 mL/min Injection Vol.: 7 muL UV detection: 268 nm Column temp.: 35 ¡ãC Retention times: (R) -amine 2-5: 13.8 min (S)-amine: 11.2 min

Statistics shows that (2Z)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]pyrazine-7(8H)-yl]-1-(2,4,5-trifluorophenyl)but-2-en-2-amine is playing an increasingly important role. we look forward to future research findings about 767340-03-4.

Reference:
Patent; MERCK & CO., INC.; SOLVIAS AG; WO2005/97733; (2005); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem