Category: 762240-92-6

Application of 762240-92-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 762240-92-6 name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: A solution of 3-(trifluoromethyl)-5,6,7,8-tetrahydro [1,2,4]triazolo[4,3-a]pyrazine hydrochloride salt 9 (1.0 eq.) in dimethylformamide (DMF, 2e3 mL) was added potassium carbonate (2.5eq.) at 5 C and stirred for 15 min at room temperature. To this,various chloride derivatives (1.0 eq.) in DMF was added to reaction mixture at same temperature. The resultant reaction mixture was allowed to stir at room temperature for 24 h. The completion of the reaction was monitored on TLC (using 10% MeOH: DCM and ammonia as a modifier as mobile phase). The reaction mixture was poured into ice-cold water and extracted with ethyl acetate(2 x 15 mL). Organic layers were combined and the combined organic layer was dried over sodium sulfate and concentrated under reduced pressure to afford crude material and crystallized it from methanol to get 3-(trifluoromethyl)-5,6,7,8-tetrahydro [1,2,4]triazolo [4,3-a]pyrazine derivatives (12f-12j) in good practical yield.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, and friends who are interested can also refer to it.

Reference:
Article; Jethava, Divya J.; Acharya, Prachi T.; Vasava, Mahesh S.; Bhoi, Manoj N.; Bhavsar, Zeel A.; Rathwa, Sanjay K.; Rajani, Dhanji P.; Patel, Hitesh D.; Journal of Molecular Structure; vol. 1184; (2019); p. 168 – 192;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 762240-92-6, These common heterocyclic compound, 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Azetidinone IIa’ (0.5 g, 2.32 mmol, ee 99.5 %), 3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4] triazolo[4,3-a] pyrazine hydrochloride (III’, 1.06 g, 4.65 mmol), Et3N (0.28 g, 4.65 mmol) and 2-ethylhexanoic acid (0.17 g, 1.16 mmol) were suspended in THF (10 mL). The resulting suspension was stirred at 75C for 72 h. After cooling the mixture to 0C, compound 2 was filtered off and the solvent was removed in vacuo. To the remaining oil was added water (10 mL) and the product was extracted with dichloromethane (3 x10 mL). The organic phases were combined, dried over magnesium sulfate and concentrated in vacuo to give 0.90 g of sitagliptin (IV”) (95%, ee 99.5 %) as dark yellow oil.

Statistics shows that 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride is playing an increasingly important role. we look forward to future research findings about 762240-92-6.

Reference:
Patent; LEK Pharmaceuticals d.d.; The designation of the inventor has not yet been filed; EP2674432; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C6H8ClF3N4

(3R)-3-azido-4-(2,4,5-trifluorophenyl)-buryric acid (5 g) obtained in step 3 and triazole derivative of formula (VI) (5.3 g) were added to DMF (40 ml) and water (20 ml), stirred for 15 min, and cooled to 10C . N- methylmorpholine (2.4 ml) was added to the mixture, stirred for 10 min, and cooled to 0 C . EDC (5.6 g) was added to the resulting mixture, and stirred for 1 hour. Ethyl acetate (50 ml) and water (25 ml) were added to the resulting mixture, and the organic layer formed thereafter was separated. The separated organic layer was washed four times with 50 ml of satuated saline, dried over MgSO4, and filtered. The organic solvent was removed from the filtrate under a reduced pressure to obtain the title compound (7.8 g; yield: 93%).1H-NMR(300MHz, CDC13): delta 7.20-7.11 (1H, m), 6.99-6.90 (1H, m), 5.20-4.96 (2H, m), 4.28-4.05 (5H, m), 2.98-2.67 (4H, m).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 762240-92-6.

Reference:
Patent; HANMI HOLDINGS CO., LTD.; KIM, Nam Du; CHANG, Ji Yeon; KIM, Dong Jun; LEE, Hyun Seung; JUNG, Jae Hyuk; CHANG, Young Kil; LEE, Gwan Sun; WO2011/49344; (2011); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 762240-92-6 as follows. name: 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride

General procedure: To the stirred reaction mixture of 3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo-[4,3-a]pyrazine hydrochloride(11) (300 mg, 1.32 mmol), TEA (0.55 mL, 3.95 mmol)and toluene (10 mL), substituted cyanates 12(a-e)/isocyanates12(f-j) (1.32 mmol) were added at ambient temperature.The reaction mass was agitated at 75-80 C until thecompletion of the reaction that was monitored by TLC. Thereaction mass was allowed to cool at ambient temperatureand it was washed sequentially with 3% aqueous HCl(5.0 mL) and then water (5.0 mL). The organic fraction wasconcentrated under vacuum at 50-55 C to obtain crudeproduct. It was purified by column chromatography using10-50% of EtOAc:hexane mixture as a mobile phase.

According to the analysis of related databases, 762240-92-6, the application of this compound in the production field has become more and more popular.

Reference:
Article; Mannam, Madhava Rao; Devineni, Subba Rao; Pavuluri, Chandra Mouli; Chamarthi, Naga Raju; Kottapalli, Raja Sekhara P.; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 194; 9; (2019); p. 922 – 932;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Some common heterocyclic compound, 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, molecular formula is C6H8ClF3N4, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride

The title compound was prepared using the method described in WO 2008/040974.A mixture of 3-nitropropionic acid (20.0 g, 0.168 mol), 3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1 ,2,4]triazolo[4,3- a]pyrazine hydrochloride (48.0 g, 0.21 mol) in acetonitrile (400 mL) is cooled to 0 C and 4-methylmorpholine (16.9 g, 0.168 mol) is added, followed by N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide hydrochloride (EDC) (48.4 g, 0.25 mol) after 5 min. The resulting mixture is stirred at room temperature for 20 hours. The resulting mixture is concentrated to about 2/3 of its volume and ethyl acetate is added (750 mL). The resulting mixture is washed twice with water (200 + 100 mL), sat. aq. sodium hydrogencarbonate (200 mL), brine (200 mL) and dried with sodium sulfate. The resulting clear solution is concentrated under reduced volume and MTBE is added (100 mL). The precipitated white solid is filtered off, washed with MTBE (200 mL) and dried under reduced pressure to yield 38.8 g (79 % yield) of NTPT as white powder.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 762240-92-6, its application will become more common.

Reference:
Patent; LEK PHARMACEUTICALS D.D.; STERK, Damjan; USTAR, Matjaz; ZLICAR, Marko; WO2011/151443; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 762240-92-6, These common heterocyclic compound, 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To the stirred reaction mixture of 3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo-[4,3-a]pyrazine hydrochloride(11) (300 mg, 1.32 mmol), TEA (0.55 mL, 3.95 mmol)and toluene (10 mL), substituted cyanates 12(a-e)/isocyanates12(f-j) (1.32 mmol) were added at ambient temperature.The reaction mass was agitated at 75-80 C until thecompletion of the reaction that was monitored by TLC. Thereaction mass was allowed to cool at ambient temperatureand it was washed sequentially with 3% aqueous HCl(5.0 mL) and then water (5.0 mL). The organic fraction wasconcentrated under vacuum at 50-55 C to obtain crudeproduct. It was purified by column chromatography using10-50% of EtOAc:hexane mixture as a mobile phase. N-(4-Fluorophenyl)-3-(trifluoromethyl)-5,6,7,8-tetrahydro-[1, 2, 4]triazolo [4,3-a]pyrazine-7-carboxamide (13a); White crystalline solid; m.r.: 206-208 C. IR (KBr, nu/cm-1):3360 (N-H, str); 1674 (C=O, str); 1544 (C=N, str); 1163(-CF3, str). 1H NMR (400 MHz; DMSO-d6), d, ppm (J, Hz):3.95-3.98 (2H, t, J5.2, Piperazine), 4.22-4.24 (2H, t,J5.2, Piperazine), 4.95 (2H, s, Piperazine), 7.08-7.13 (2H,m, Ar-H), 7.43-7.79 (2H, m, Ar-H), 8.9 (1H, s, NH). 13CNMR (100 MHz; DMSO-d6), d, ppm (J, Hz): 39.98 (-CH2-CH2-); 40.87 (-CH2-CH2-); 43.30 (CH2-C-), 114.79 (d,J22.0, CF3), 117.12 (d, J268.0, C-F Ar), 121.68 (d,J8.0, C Ar), 136.14, 151.09 (-C=O), 154.59 (C Ar), 156.50(C Ar), 158.87 (C Ar). LC-MS, m/z, (rel, %): 330.09 [M+H]+ (100). HRMS (FAB) Calc.: C13H11F4N5O:329.08997; Found: 330.0967 [M+H+].

Statistics shows that 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride is playing an increasingly important role. we look forward to future research findings about 762240-92-6.

Reference:
Article; Mannam, Madhava Rao; Devineni, Subba Rao; Pavuluri, Chandra Mouli; Chamarthi, Naga Raju; Kottapalli, Raja Sekhara P.; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 194; 9; (2019); p. 922 – 932;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 762240-92-6, A common heterocyclic compound, 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, molecular formula is C6H8ClF3N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To the stirred reaction mixture of 3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo-[4,3-a]pyrazine hydrochloride(11) (300 mg, 1.32 mmol), TEA (0.55 mL, 3.95 mmol)and toluene (10 mL), substituted cyanates 12(a-e)/isocyanates12(f-j) (1.32 mmol) were added at ambient temperature.The reaction mass was agitated at 75-80 C until thecompletion of the reaction that was monitored by TLC. Thereaction mass was allowed to cool at ambient temperatureand it was washed sequentially with 3% aqueous HCl(5.0 mL) and then water (5.0 mL). The organic fraction wasconcentrated under vacuum at 50-55 C to obtain crudeproduct. It was purified by column chromatography using10-50% of EtOAc:hexane mixture as a mobile phase.

The synthetic route of 762240-92-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mannam, Madhava Rao; Devineni, Subba Rao; Pavuluri, Chandra Mouli; Chamarthi, Naga Raju; Kottapalli, Raja Sekhara P.; Phosphorus, Sulfur and Silicon and the Related Elements; vol. 194; 9; (2019); p. 922 – 932;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, A new synthetic method of this compound is introduced below., Recommanded Product: 762240-92-6

A round bottom flask is charged with 2,4,5-thfluorophenylacetic acid (25 g),Meldrums acid (20.5 g), N,N-dimethylaminopyhdine (1.28 g), and acetonitrile (75 ml_). Diisopropylethylamine (47.28 ml_) is added drop-wise, while maintaining the temperature below 500C. The mixture is heated to 500C, followed by drop-wise addition of pivalolyl chloride (17.8 ml_) over about 45 minutes. The mixture is maintained at the same temperature with stirring for 3 hours, followed by addition of thazole hydrochloride (30 g) in one portion. Subsequently, thfluoroacetic acid (2.95 ml_) is added and the mixture is maintained at 55C for another 6 hours. The mixture is cooled to room temperature, followed by distillation to remove acetonitrile and afford a residue. Water (100 ml_) and ethyl acetate (500 ml_) are added to the residue, and the organic layer is separated. The organic layer is washed with 5% sodium bicarbonate, then brine solution (50 ml_), and is dried over sodium sulphate, followed by distillation at 400C to form a ketoamide, i.e., 4- oxo-4-[3-(thfluoromethyl)-5,6-dihydro[1 ,2,4]thazolo[4,3a]pyrazin-7(8H)-yl]-1 -(2,4,5- trifluorophenyl)butan-2-one. lsopropyl alcohol (75 ml_) and (R)-(+)-1 – phenylethylamine (18.64 ml_) are added and the mixture is heated to 45-50C for 4 hours. The isopropyl alcohol is distilled completely below 40C to form a residue. Dichloromethane (200 ml_) and water (100 ml_) are mixed with the residue, followed by separation of the organic layer. The aqueous layer is extracted with dichloromethane (200 ml_). The organic layers are combined, washed with brine, dried over sodium sulphate, and distilled to afford a residue, which, on purification results in the title compound (28.7g, 42.8% yield).

The synthetic route of 762240-92-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DR. REDDY’S LABORATORIES LTD.; DR. REDDY’S LABORATORIES, INC.; BANDICHHOR, Rakeshwar; GUDIMALLA, Nagaraju; DWIVEDI, Namrata; CHETLURU, Kiran Kumar; GADE, Srinivas Reddy; MUVVA, Venkateswarlu; SRIVASTAVA, Bindu; WO2011/25932; (2011); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

These common heterocyclic compound, 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C6H8ClF3N4

General procedure: A solution of 3-(trifluoromethyl)-5,6,7,8-tetrahydro [1,2,4]triazolo[4,3-a]pyrazine hydrochloride salt 9 (1.0 eq.) in dimethylformamide (DMF, 2e3 mL) was added potassium carbonate (2.5eq.) at 5 C and stirred for 15 min at room temperature. To this,various chloride derivatives (1.0 eq.) in DMF was added to reaction mixture at same temperature. The resultant reaction mixture was allowed to stir at room temperature for 24 h. The completion of the reaction was monitored on TLC (using 10% MeOH: DCM and ammonia as a modifier as mobile phase). The reaction mixture was poured into ice-cold water and extracted with ethyl acetate(2 x 15 mL). Organic layers were combined and the combined organic layer was dried over sodium sulfate and concentrated under reduced pressure to afford crude material and crystallized it from methanol to get 3-(trifluoromethyl)-5,6,7,8-tetrahydro [1,2,4]triazolo [4,3-a]pyrazine derivatives (12f-12j) in good practical yield.

The synthetic route of 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jethava, Divya J.; Acharya, Prachi T.; Vasava, Mahesh S.; Bhoi, Manoj N.; Bhavsar, Zeel A.; Rathwa, Sanjay K.; Rajani, Dhanji P.; Patel, Hitesh D.; Journal of Molecular Structure; vol. 1184; (2019); p. 168 – 192;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 762240-92-6, These common heterocyclic compound, 762240-92-6, name is 3-(Trifluoromethyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 250 ml three-necked flask,Add 100 ml of dichloromethane,(3R)-3 tert-Butoxycarbonylamino-4-(2,4,5-trifluorophenyl)-butyric acid (VI) (6.6 g, 0.02 mol) and3-trifluoromethyl-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (VII) (4.6 g, 0.02 mol) ,Cool to 0 C with an ice salt bath.Add 1-hydroxybenzotriazole (HOBT) (2.7 g, 0.02 mol),1-ethyl-3-(3-dimethylaminopropyl)carbimide hydrochloride (EDC.HCl) (3.82 g, 0.02 mol),Triethylamine (6 g, 0.03 mol) was added dropwise.Reaction for 24h,The reaction solution was washed twice with 50 ml of distilled water.dry,filter,Concentration gave the crude product (9.62 g, 0.019 mol).The yield was 95%.

The synthetic route of 762240-92-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhejiang Yongtai Technology Co., Ltd.; Zhejiang Yongtai Pharmaceutical Co., Ltd.; Zhang Feng; Cheng Xuyang; Tan Xiao; (19 pag.)CN109824546; (2019); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem