Category: 74290-65-6

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. SDS of cas: 74290-65-6

(ii) 2-Amino-3-bromo-5-methylpyrazine (0.374 g) was added to a freshly prepared solution of sodium methoxide in methanol (made by addition of sodium (0.115 g) to methanol (6 ml). The reaction mixture was heated under reflux for 18 hours, cooled to ambient temperature and the solvent removed by evaporation. Water (5 ml) was added to the residue and extracted with dichloromethane (3*20 ml). The combined organic extracts were dried (MgSO4) and the solvent removed by evaporation. The residue was purified by chromatography on silica gel, eluding with dichloromethane to give 2-amino-3-methoxy-5-methylpyrazine as a white crystalline solid (0.208 g, 75%), m.p. 67-69 C.; mass spectrum (+ve CI): 140 (M+H)+.

The synthetic route of 74290-65-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Ltd.; US5668137; (1997); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 74290-65-6, A common heterocyclic compound, 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine, molecular formula is C5H6BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-Bromo-5-methylpyrazin-2-amine (7.64 g, 40.6 mmol), triethylamine (12.3 g, 122mmol), cuprous iodide (0.77 g, 4.06 mmol) and palladium(II)bis(triphenylphosphine) dichloride(2.85 g, 4.06 mmol) were dissolved in tetrahydrofuran (150 mL). The mixture was stirred at rt,then trimethylsilylacetylene (8.00 mL, 56.9 mmol) was added dropwise slowly to the mixture.The resulting mixture was continued to stir for 4 h.The reaction mixture was diluted with ethylacetate (50 mL). The mixture was filtered. The filtrate was concentrated in vacuo, and theresidue was purified by silica gel column chromatography (PE/EtOAc (v/v) = 3011) to give thetitle compound as a light yellow solid (7 .0 g, 84 % ).MS (ESI, pos. ion) m/z: 206.1 [M+Ht.

The synthetic route of 74290-65-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; TANG, Changhua; REN, Qingyun; YIN, Junjun; YI, Kai; LEI, Yibo; WANG, Yejun; ZHANG, Yingjun; (303 pag.)WO2018/108125; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 74290-65-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 74290-65-6 name is 3-Bromo-5-methylpyrazin-2-amine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(b) 2-Amino-3-bromo-5-methylpyrazine (0.374 g) was added to a freshly prepared solution of sodium methoxide in methanol (made by addition of sodium (0.115 g) to methanol (6 ml)). The reaction was heated under reflux for 18 hours, cooled to ambient temperature and the solvent removed by evaporation. Water (5 ml) was added to the residue and extracted with dichloromethane (3*20 ml). The combined organic extracts were dried (MgSO4) and the solvent removed by evaporation. The residue was purified by chromatography on silica gel, eluding with dichloromethane to give 2-amino-3-methoxy-5-methylpyrazine as a white crystalline solid (0.208 g, 75%), m.p. 67-69 C.; mass spectrum (+ve CI): 140 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Bromo-5-methylpyrazin-2-amine, and friends who are interested can also refer to it.

Reference:
Patent; Zeneca Limited; US5866568; (1999); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 3-Bromo-5-methylpyrazin-2-amine

(ii) 2-Amino-3-bromo-5-methylpyrazine (0.374 g) was added to a freshly prepared solution of sodium methoxide in methanol (made by addition of sodium (0.115 g) to methanol (6 ml). The reaction mixture was heated under reflux for 18 hours, cooled to ambient temperature and the solvent removed by evaporation. Water (5 ml) was added to the residue and extracted with dichloromethane (3*20 ml). The combined organic extracts were dried (MgSO4) and the solvent removed by evaporation. The residue was purified by chromatography on silica gel, eluding with dichloromethane to give 2-amino-3-methoxy-5-methylpyrazine as a white crystalline solid (0.208 g, 75%), m.p. 67-69 C.; mass spectrum (+ve CI): 140 (M+H)+.

The synthetic route of 74290-65-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Ltd.; US5668137; (1997); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 74290-65-6, A common heterocyclic compound, 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine, molecular formula is C5H6BrN3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-Bromo-5-methylpyrazin-2-amine (7.64 g, 40.6 mmol), triethylamine (12.3 g, 122mmol), cuprous iodide (0.77 g, 4.06 mmol) and palladium(II)bis(triphenylphosphine) dichloride(2.85 g, 4.06 mmol) were dissolved in tetrahydrofuran (150 mL). The mixture was stirred at rt,then trimethylsilylacetylene (8.00 mL, 56.9 mmol) was added dropwise slowly to the mixture.The resulting mixture was continued to stir for 4 h.The reaction mixture was diluted with ethylacetate (50 mL). The mixture was filtered. The filtrate was concentrated in vacuo, and theresidue was purified by silica gel column chromatography (PE/EtOAc (v/v) = 3011) to give thetitle compound as a light yellow solid (7 .0 g, 84 % ).MS (ESI, pos. ion) m/z: 206.1 [M+Ht.

The synthetic route of 74290-65-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; TANG, Changhua; REN, Qingyun; YIN, Junjun; YI, Kai; LEI, Yibo; WANG, Yejun; ZHANG, Yingjun; (303 pag.)WO2018/108125; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 74290-65-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 74290-65-6 as follows.

To 3-bromo-5-methylpyrazin-2-amine (850 mg,4.52 mmol) was added ethoxycarbonyl isothiocyanate (0.51ml., 4.52 mmol) followed by toluene (1 mL). The mixturewas placed in a preheated 100 C. oil bath, and within aminute, all the solids had dissolved. After 15 min, all hadseized to a solid mass. After an additional 15 minutes, methanol(-5 mL) was added and the mixture refluxed to digest thesolids. The mixture was cooled to rt after 5 minutes and thesolids collected by filtration, washing with methanol to giveethyl 6-methylthiazolo[5,4-b]pyrazin-2-ylcarbamate (680mg, 2.85 mmol, 63.1% yield).

According to the analysis of related databases, 74290-65-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; COOK II, JAMES H; MCDONALD, IVAR M; KING, DALTON; OLSON, RICHARD E; WANG, NENGHUI; IWUAGWU, CHRISTIANA I; ZUSI, F.CHRISTOPHER; MACOR, JOHN E; (330 pag.)JP5714745; (2015); B2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine, A new synthetic method of this compound is introduced below., category: Pyrazines

Step 2. 3-Bromo-2-ethoxy-5-methylpyrazine. To a solution of 3-bromo-5-methylpyrazin-2-amine (4.00 g, 21.27 mmol) in EtOH (42 mL), at 0 C., was added tert-butyl nitrite (7.65 mL, 63.82 mmol) followed by 4 N hydrochloric acid in 1,4-dioxane (1.91 mL, 7.66 mmol). The reaction mixture was allowed to warm to room temperature and stirred for 8 h. The mixture was concentrated under reduced pressure. The residue was diluted with aq. NaHCO3 and extracted into DCM. The combined organic layers were dried, and the solvent was removed under reduced pressure. Purification (FCC, SiO2, 0-20%, EtOAc/hexanes) afforded the title compound as a white solid (2.5 g, 54%). [M+H]=217.06/219.05.

The synthetic route of 74290-65-6 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine, A new synthetic method of this compound is introduced below., Recommanded Product: 3-Bromo-5-methylpyrazin-2-amine

[00791] To a mixture of 3-bromo-5-methyl-pyrazin-2-amine (31 g, 164.87 mmol) in MeOH (150 mL) was added NaOMe (14 g, 263.79 mmol) in one portion at 30 C under N2. The mixture was stirred at 100 C for 6 hrs. The mixture was concentrated under reduced pressure and the resulting residue was dissolved in water (100 mL). The mixture was extracted with EtOAc and the combined organic layers were washed with brine (20 mL), dried with Na2S04, filtered and concentrated under reduced pressure. The resulting residue was purified by column chromatography (to afford 3-methoxy-5-methyl-pyrazin-2-amine (21 g, 92% yield) as a white solid. 1H MR (400 MHz, CDCh-d) delta ppm 7.39 (s, 1H) 4.59 (br s, 2 H) 3.97 (s, 3 H) 2.29 (s, 3 H)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; REVOLUTION MEDICINES, INC.; BLANK, Brian R.; PITZEN, Jennifer; WANG, Gang; WON, Walter S.; TZITZILONIS, Christos; LI, Jie Jack; KOLTUN, Elena S.; AAY, Naing; BUCKL, Andreas; MELLEM, Kevin; SEMKO, Christopher; JOGALEKAR, Ash; KISS, Gert; GILL, Adrian; (298 pag.)WO2018/136265; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 74290-65-6, These common heterocyclic compound, 74290-65-6, name is 3-Bromo-5-methylpyrazin-2-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of 3-bromo-5-methylpyrazin-2-amine (1 g, 5.3 mmol) in chloroacetaldehyde (5 mL) was heated to 100 C for 1 h. The reaction mixture was cooled to room temperature, diluted with ethyl acetate and washed with water. The organic layer was dried over sodium sulphate, filtered and concentrated to get residue. The residue was purified by flash chromatography using 20% ethyl acetate in hexanes to get pure titled compound (0.6 g, 53%). ?HNMR (300 MHz, DMSO- d6): oe 8.40 (d, J = 0.9 Hz, 1H), 8.02 (d, J = 0.6 Hz, 1H), 7.79 (d, J =0.9 Hz, 1H), 2.37 (s, 3H).

Statistics shows that 3-Bromo-5-methylpyrazin-2-amine is playing an increasingly important role. we look forward to future research findings about 74290-65-6.

Reference:
Patent; AURIGENE DISCOVERY TECHNOLOGIES LIMITED; KOTRABASAIAH UJJINAMATADA, Ravi; PANDIT, Chetan; (152 pag.)WO2016/185342; (2016); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem