Category: 55557-52-3

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, A new synthetic method of this compound is introduced below., Recommanded Product: 3-Chloropyrazine-2-carbonitrile

Weigh 3-chloropyrazine-2-carbonitrile (1.7 g, 12.48 mmol) into a 100 mL single-neck round bottom flask,40 mL of acetonitrile was added thereto, and the solution was dissolved and clarified with stirring at room temperature.Thereafter, cesium carbonate (8.1 g, 24.96 mmol) was slowly added in portions to the system.After the addition was completed, an acetonitrile (10 mL) solution in which N-deuterated methylmethanesulfonamide (2.1 g, 18.72 mmol) was dissolved was added dropwise to the system.After the dropping was completed, the system was transferred to an oil bath at 80 C and stirred under reflux.After 30 minutes, TLC monitored the consumption of raw materials completely.The oil bath was removed, and the system was allowed to cool to room temperature, followed by suction filtration, and the filter cake was rinsed with acetonitrile (100 mL) multiple times.The filtrates were combined, and the solvent was removed by rotary evaporation to obtain a crude product, which was then separated by column chromatography.1.1 g of N- (3-cyanopyrazin-2-yl) -N-deuterated methylmethanesulfonamide was obtained as a light brown oily liquid,Yield: 42.3%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Chengdu Haichuang Pharmaceutical Co., Ltd.; Du Wu; Li Yu; Wen Kun; Li Xinghai; Chen Yuanwei; (20 pag.)CN110452229; (2019); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 55557-52-3, category: Pyrazines

Ste -1: (0958) Preparation of (3-chloropyrazin-2-yl)methanamine: (0959) [00361] To a solution of 3-chloropyrazine-2-carbonitrile (2 g) in acetic acid (20 mL) was added Raney nickel (50% slurry in water, 1.6 g). The resulting mixture was stirred under 4 bar hydrogen pressure at room temperature for 15 h. The reaction mixture was filtered through celite and the filtrate was concentrated under reduced pressure and co-evaporated with toluene to afford the title compound (3-chloropyrazin-2-yl)methanamine acetate (2.9 g, crude) as brown solid. Calculated (M+H): 144.03; Found (M+H): 144.0

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloropyrazine-2-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; LUC THERAPEUTICS; ANDERSON, David, R.; VOLKMANN, Robert, A.; MENNITE, Frank, S.; FANGER, Christopher; (390 pag.)WO2017/100591; (2017); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 3-Chloropyrazine-2-carbonitrile

3-chloropyrazine-2-carbonitrile (32 g) was dissolved in 300 ml of acetic acid and 14 g of Raney nickel in 50% slurry,Slowly add to the above solution, pass 4.5 bar of hydrogen, and stir overnight at room temperature.Filtered through diatomaceous earth, and the filtrate was spin-dried. The ethyl acetate was taken with water to obtain a solid. The solid was dissolved in 50 C ethyl acetate.A hydrogen chloride gas was passed into the ethyl acetate solution, and a solid was precipitated, filtered, and the filter cake was washed with ethyl acetate.Drying under vacuum at 50 C gave 23 g (3-chloropyrazin-2-yl) methylamine.hydrochloride.

According to the analysis of related databases, 55557-52-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Andikang (Wuxi) Biological Technology Co., Ltd.; Zhu Xiaoyun; Jiang Weiping; (34 pag.)CN110563733; (2019); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, A new synthetic method of this compound is introduced below., COA of Formula: C5H2ClN3

A mixture of the respective boronic acid derivative (B-B(OH)2) (21.5 mmol), 3-chloro-pyrazine-2-carbonitrile (21.5 mmol), a solution of K2CO3 (59.4 mmol) in water (30 mL), PPh3 (3. 2 mmol), Pd(OAc)2 (1.05 mmol) in dry DME was stirred at reflux under inert atmosphere for 16 h. After cooling to rt, the reaction mixture was diluted with EtOAc, filtered over celite, the filtrate was dried over MgSO4, filtered and concentrated in vacuo to yield the desired pyrazine-2-carbonitrile derivative which was used for the next step without further purification prepared by reaction with commercially available 3-m-tolyl-boronic acid LC-MS: tR=0.88 min; [M+H+ MeCN]+=243.63

The synthetic route of 55557-52-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Aissaoui, Hamed; Boss, Christoph; Hazemann, Julien; Koberstein, Ralf; Siegrist, Romain; Sifferlen, Thierry; US2011/105491; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, A new synthetic method of this compound is introduced below., Safety of 3-Chloropyrazine-2-carbonitrile

The starting compound 3-chloropyrazine-2-carboxamide was prepared via partial hydrolysis of the nitrile group of 3-chloropyrazine-2-carbonitrile (Fluorochem, Co., Hadfield, Derbyshire, UK). A mixture of concentrated (30%) hydrogen peroxide (29 mL) and water (195 mL) was prepared and alkalinized with an 8% (w/v) solution of sodium hydroxide to obtain a solution with pH 9. The carbonitrile (104 mmol) was then added portionwise into the heated (50 C) mixture over a period of 30 min. The whole mass was stirred for an additional 2.5 h at 55 C while the pH was periodically monitored and alternatively adjusted to the value of 9 by adding a few drops of 8% NaOH solution. The reaction mixture was cooled in a fridge to initiate crystallization. The crude product was recrystallized from ethanol [27]. The yield of this reaction was approximately 80%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Jandourek, Ondrej; Tauchman, Marek; Paterova, Pavla; Konecna, Klara; Navratilova, Lucie; Kubicek, Vladimir; Holas, Ondrej; Zitko, Jan; Dolezal, Martin; Molecules; vol. 22; 2; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 3-Chloropyrazine-2-carbonitrile

2- cyano-3-(4-oxopiperidino)-pyrazine (Compound 56a)A mixture of 2-cyano-3-chloropyrazine (500 mg, 3.4 mmol), piperidin-4-one hydrochloridre monohydrate (1.33 g, 8.5 mmol) and TEA (1.8 ml, 10.3 mmol) in toluene (20 ml) was reacted at 80C for 8 h. After diluting with H20 and EtOAc, the organic phase was evaporated to dryness in vacuo. The crude was purified by automated flash chromatography (Horizon TM – Biotage) eluting with PE – EtOAc 80:20, affording a yellow solid. Yield: 69%.MS: [M+H]+ = 203.15

The synthetic route of 55557-52-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; RECORDATI IRELAND LIMITED; LEONARDI, Amedeo; MOTTA, Gianni; RIVA, Carlo; GUARNERI, Luciano; GRAZIANI, Davide; MARINONI, Fabio; BETTINELLI, Ilaria; WO2011/29633; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, belongs to pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 55557-52-3

Step 1: Into a 2000 mL 4 necked round bottom flask purged and maintained with an inert atmosphere of nitrogen were placed a solution of 3-chloropyrazine-2-carbonitrile (100 g, 716 mmol) in ethanol (660 mL), ethyl 2-sulfanylacetate (112 g, 932 mmol) and sodium carbonate (99 g, 930 mmol). The resulting solution was stirred for 4.5 h at 100 C in an oil bath. The reaction mixture was cooled to room temperature and poured into 7.5 L of water. The solid was collected by filtration. The solid was dissolved in 1500 mL of ethyl ether and filtered. The filtrate was concentrated under reduced pressure. This resulted in ethyl 7-aminothieno[2,3-Z>]pyrazine-6- carboxylate as a solid.

The synthetic route of 55557-52-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIM, Jongwon; ALTMAN, Michael, D.; GIBEAU, Craig, R.; (84 pag.)WO2016/144849; (2016); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 55557-52-3, The chemical industry reduces the impact on the environment during synthesis 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, I believe this compound will play a more active role in future production and life.

[A] 1H-Pyrazolo [34-b] pyrazin-3-amine[0304][0305]To a stirred solution of 3-chloropyrazine-2-carbonitrile (5 g 35.8 mmol) in EtOH (100 mL) was added N2H4. H2O (85aq. 21 g 360 mmol) dropwise at 15 . After the addition the reaction mixture was allowed to warm up and stirred at 110 for 16 h. After cooling to room temperature the solvent was removed under reduced pressure and the residue solid was washed with EtOH (20 mL) to give a crude title compound (3 g 62yield) as a brown solid. MS 136.1 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Chloropyrazine-2-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SAVIRA PHARMACEUTICALS GMBH; EUROPEAN MOLECULAR BIOLOGY LABORATORY; TAN, Xuefei; WANG, Lisha; CUMMING, John Graham; LIU, Yongfu; WU, Jun; LI, Dongbo; SHEN, Hong; SHI, Tianlai; (179 pag.)WO2017/133657; (2017); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 55557-52-3, name is 3-Chloropyrazine-2-carbonitrile, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 55557-52-3, Recommanded Product: 55557-52-3

Intermediate 1 (S)-Benzyl 2-(8-amino-1-bromoimidazo[1 ,5-alpyrazin-3-vnpyrrolidine-1-carboxylate (a) (3-Chloropyrazin-2-yl)methanamine. hydrochloride To a solution of 3-chloropyrazine-2-carbonitrile (160 g, 1 .147 mol) in acetic acid (1.5 L) was added Raney Nickel (50% slurry in water, 70 g, 409 mmol). The resulting mixture was stirred under 4 bar hydrogen at room temperature overnight. Raney Nickel was removed by filtration over decalite and the filtrate was concentrated under reduced pressure and co-evaporated with toluene. The remaining brown solid was dissolved in ethyl acetate at 50C and cooled on an ice-bath. 2M hydrogen chloride solution in diethyl ether (1 .14 L) was added in 30 min. The mixture was allowed to stir at room temperature over weekend. The crystals were collected by filtration, washed with diethyl ether and dried under reduced pressure at 40C. The product brown solid obtained was dissolved in methanol at 60C. The mixture was filtered and partially concentrated, cooled to room temperature and diethyl ether (1000 ml) was added. The mixture was allowed to stir at room temperature overnight. The solids formed were collected by filtration, washed with diethyl ether and dried under reduced pressure at 40C to give 153.5 g of (3-chloropyrazin-2- yl)methanamine. hydrochloride as a brown solid (74.4 %, content 77 %).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; MSD OSS B.V.; BARF, Tjeerd A.; JANS, Christiaan, Gerardus, Johannes, Maria; MAN, de Adrianus, Petrus, Antonius; OUBRIE, Arthur A.; RAAIJMAKERS, Hans C.A.; REWINKEL, Johannes, Bernardus, Maria; STERRENBURG, Jan-Gerard; WIJKMANS, Jacobus C.H.M.; WO2013/10868; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 55557-52-3, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 55557-52-3 as follows.

(a). (3-Chloropyrazin-2-yl)methanamine hydrochloride was prepared as follows. To a solution of 3-chloropyrazine-2-carbonitrile (160 g, 1 .147 mol) in acetic acid (1.5 L) was added Raney Nickel (50% slurry in water, 70 g, 409 mmol). The resulting mixture was stirred under 4 bar hydrogen at room temperature overnight. Raney Nickel was removed by filtration over decalite and the filtrate was concentrated under reduced pressure and co-evaporated with toluene. The remaining brown solid was dissolved in ethyl acetate at 50C and cooled on an ice-bath. 2M hydrogen chloride solution in diethyl ether (1 .14 L) was added in 30 min. The mixture was allowed to stir at room temperature over weekend. The crystals were collected by filtration, washed with diethyl ether and dried under reduced pressure at 40C. The product brown solid obtained was dissolved in methanol at 60C. The mixture was filtered and partially concentrated, cooled to room temperature and diethyl ether (1000 ml) was added. The mixture was allowed to stir at room temperature overnight. The solids formed were collected by filtration, washed with diethyl ether and dried under reduced pressure at 40C to give 153.5 g of (3-chloropyrazin-2- yl)methanamine.hydrochloride as a brown solid (74.4 %, content 77 %).

According to the analysis of related databases, 55557-52-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ACERTA PHARMA B.V.; HAMDY, Ahmed; ROTHBAUM, Wayne; IZUMI, Raquel; LANNUTTI, Brian; COVEY, Todd; ULRICH, Roger; JOHNSON, Dave; BARF, Tjeerd; KAPTEIN, Allard; (268 pag.)WO2016/24227; (2016); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem