Category: 4744-50-7

Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 4744-50-7

The amine prepared in Example 8 (87.7 mg, 0.172 mmol, 1 eq.) was dissolved in 6 mL acetone cooled to 0C in an ice bath. To this solution was added 2,3-pyrazinedicarboxylic acid anhydride (25.8 mg, 0.172 mmol, 1 eq.). The yellow solution turned into a suspension and was then stirred room temperature for 10 min. The precipitate was filtered off with suction, washed with acetone, dissolved in methanol and concentrated under reduced pressure to afford 54 mg (51%) of the title product as an orange solid. NMR (400 MHz, DMSO-d6) delta 10.23 (s, 1H), 8.92 (t, J= 5.9 Hz, 1H), 8.80 (d, J= 2.4 Hz, 1H), 8.76 (d, J= 3.4 Hz, 1H), 8.75 (d, J= 2.5 Hz, 1H), 8.51 (d, J= 4.0 Hz, 1H), 8.44 (d, J = 4.0 Hz, 2H), 7.71 (td, J= 7.7, 1.7 Hz, 1H), 7.64 (td, J= 7.7, 1.7 Hz, 2H), 7.53 (d, J= 8.4 Hz, 2H), 7.42 (t, J= 9.2 Hz, 2H), 7.33 (d, J= 7.8 Hz, 1H), 7.28 – 7.15 (m, 5H), 3.76 (s, 2H), 3.72 (s, 4H), 3.49 (dd, J= 14.2, 6.5 Hz, 3H), 3.28 (s, 2H), 2.81 (dt, J= 13.7, 8.2 Hz, 4H), 2.65 (t, J = 6.2 Hz, 2H). 13C NMR (101 MHz, DMSO-d6) delta 169.28, 166.90, 165.62, 163.12, 158.66, 158.42, 149.03, 148.75, 147.71, 146.48, 145.66, 144.90, 143.82, 143.43, 136.84, 136.72, 136.46, 134.16, 128.88, 123.13, 122.87, 122.44, 122.16, 119.27, 60.09, 59.53, 58.08, 54.89, 51.65, 51.16, 48.62, 34.30. APCI-HRMS e/z calc. for C35H37N9O2: 615.3070, found 616.3141 [M+H]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4744-50-7, its application will become more common.

Reference:
Patent; UNIVERSITETET I OSLO; GOLDING, Louise; RONGVED, Pal; ASTRAND, Ove Alexander H°gmoen; SAMUELSEN, Ørjan; SCHNAARS, Christian; KILDAHL-ANDERSEN, Geir; (234 pag.)WO2018/33719; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 4744-50-7, A common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

The synthetic route of 4744-50-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Semelkova, Lucia; Jano?cova, Petra; Fernandes, Carlos; Bouz, Ghada; Jand?Ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 22; 9; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 4744-50-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

The synthetic route of 2,3-Pyrazinecarboxylic anhydride has been constantly updated, and we look forward to future research findings.

Reference:
Article; Semelkova, Lucia; Jano?cova, Petra; Fernandes, Carlos; Bouz, Ghada; Jand?Ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 22; 9; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 4744-50-7,Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In a 100 mL flask, 2,3-pyrazinedicarboxylic anhydride 12 (0.7505 g, 5 mmol) was reacted with 2 (1.0511 g, 5 mmol) in dry THF (10 mL) stirred overnight at rt. The mixture was transferred to a separatory funnel and extracted with CH 2 Cl 2 (3 x 10 mL) and NaOH (1N) (10 mL). The organic phase was separated and HCl (1N) (10 mL) was added to the aqueous phase until a pH=2 was reached and a precipitate formed. The solid was filtered and washed with water (20 mL), and concentrated under reduced pressure to provide 13 (1.73 g, 4.8 mmol, 96%), as a yellow solid. 1 H NMR (400 MHz, DMSO-d 6 ) delta 1.33 (3H, t, J = 7.02 Hz), 2.51 (4H, d, J = 1.59 Hz), 4.46 (2H, q, J = 7.01 Hz), 7.21 (1H, t, J = 7.52 Hz), 7.47 (1H, t, J = 7.66), 7.59 (1H, d, J = 4.10 Hz), 7.61 (1H, d, J = 3.48 Hz), 7.73 (1H, d, J = 7.27 Hz), 8.58 (1H, s), 8.63 (2H, s); 13 C NMR (100 MHz, DMSO-d 6 ) delta 14.2, 37.5, 109.4, 109.7, 110.95, 119.1, 119.7, 120.6, 122.3, 122.6, 126.2, 131.8, 136.8, 140.5, 141.8, 144.8, 145.8, 164.3. LC/MS (ESI) m/z 361.1292 [M+H + ].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Pyrazinecarboxylic anhydride, its application will become more common.

Reference:
Article; Vlaar, Cornelis P.; Castillo-Pichardo, Linette; Medina, Julia I.; Marrero-Serra, Cathyria M.; Velez, Ericka; Ramos, Zulma; Hernandez, Eliud; Bioorganic and Medicinal Chemistry; vol. 26; 4; (2018); p. 884 – 890;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4744-50-7, Safety of 2,3-Pyrazinecarboxylic anhydride

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Pyrazinecarboxylic anhydride, and friends who are interested can also refer to it.

Reference:
Article; Semelkova, Lucia; Jano?cova, Petra; Fernandes, Carlos; Bouz, Ghada; Jand?Ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 22; 9; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 4744-50-7,Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Pyrazinecarboxylic anhydride, its application will become more common.

Synthetic Route of 4744-50-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Sodium dodecyl sulfate (SDS, 6 mmol) was added to a stirred heterogeneous suspension of amine (5 mmol) in water (20 mL) until a homogeneous solution was formed, (in case of turbidity, the mixture was warmed to obtain a clear solution). Anhydride 17(5 mmol) dissolved in acetonitrile (5 mL) was added to this solution in one lot. After stirring for 1 h at room temperature, the acetonitrile was evaporated and the product precipitated from the aqueous layer. To the aqueous solution containing precipitate, solid sodium hydrogen carbonate was added pinch-wise until the effervescence ceased and the pH was 6.0. The remaining precipitated product was filtered, washed with water (20 mL), dried in a vacuum desiccator. In cases where the product did not precipitate, the reaction mixturewas extracted with ethyl acetate (2 25 mL). The combined organic extracts were dried with anhydrous Na2SO4 and the solvent was removed in a rotary evaporator under reduced pressure to yield the pure product.

The synthetic route of 2,3-Pyrazinecarboxylic anhydride has been constantly updated, and we look forward to future research findings.

Synthetic Route of 4744-50-7,Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Pyrazinecarboxylic anhydride, its application will become more common.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, A new synthetic method of this compound is introduced below., name: 2,3-Pyrazinecarboxylic anhydride

12H-pyrazino[2′,3′:3,4]pyrrolo[1,2-a]perimidin-12-one (1): Naphthalene-1,8-diamine (40 mg, 0.057 mmol), furo[3,4-b]pyrazine-5,7-dione (40 mg, 34 mmol), and 10ml pyridine were added into a round bottom flask and heated to reflux. After 4h, the reaction mixture cooled down and the solvent was removed under reduced pressure. The crude residue was dispersed in 50 mL methanol with strong agitation. After 1h, the solid was collected by vacuum filtration and purified using silica-gel column chromatography with methylene chloride:methanol (50:1) to afford 1 (28 mg, 39%) as a red powder. 1H NMR (CDCl3, 400 MHz) delta 9.06 (d, 2H), 8.67 (d, 1H), 7.65-7.71 m (m, 3H), 7.54-7.57 (m, 2H); FT-IR 1732, 1654, 1402, 1375, 1131, 831, 760, 423 cm-1; Mp > 250oC; MALDI-TOF MS exact mass (M + H): 272.28; calcd. Mass: 271.27.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Zhao, Jian-Feng; Liu, Yi; Soh, Jiayun Bethia; Li, Yong-Xin; Ganguly, Rakesh; Ye, Kai-Qi; Huo, Fengwei; Huang, Ling; Tok, Alfred Iing Yoong; Loo, Joachim Say Chye; Zhang, Qichun; Tetrahedron Letters; vol. 53; 45; (2012); p. 6044 – 6047;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 4744-50-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, This compound has unique chemical properties. The synthetic route is as follows.

In a 100 mL flask, 110 2,3-pyrazinedicarboxylic anhydride 12 (0.7505 g, 5 mmol) was reacted with 13 2 (1.0511 g, 5 mmol) in dry 67 THF (10 mL) stirred overnight at rt. The mixture was transferred to a separatory funnel and extracted with CH2Cl2 (3¡Á10 mL) and NaOH (1N) (10 mL). The organic phase was separated and 74 HCl (1N) (10 mL) was added to the aqueous phase until a pH=2 was reached and a 111 precipitate formed. The solid was filtered and washed with water (20 mL), and concentrated under reduced pressure to provide 13 (1.73 g, 4.8 mmol, 96%), as a yellow solid. 1H NMR (400 MHz, DMSO-d6) delta 1.33 (3H, t, J=7.02 Hz), 2.51 (4H, d, J=1.59 Hz), 4.46 (2H, q, J=7.01 Hz), 7.21 (1H, t, J=7.52 Hz), 7.47 (1H, t, J=7.66), 7.59 (1H, d, J=4.10 Hz), 7.61 (1H, d, J=3.48 Hz), 7.73 (1H, d, J=7.27 Hz), 8.58 (1H, s), 8.63 (2H, s); 13C NMR (100 MHz, DMSO-d6) delta 14.2, 37.5, 109.4, 109.7, 110.95, 119.1, 119.7, 120.6, 122.3, 122.6, 126.2, 131.8, 136.8, 140.5, 141.8, 144.8, 145.8, 164.3.

The chemical industry reduces the impact on the environment during synthesis 2,3-Pyrazinecarboxylic anhydride. I believe this compound will play a more active role in future production and life.

Reference:
Patent; UNIVERSITY OF PUERTO RICO; HERNANDEZ-O’FARRILL, Eliud; VLAAR, Cornelis P.; DHARMAWARDHANE FLANAGAN, Suranganie; CASTILLO-PICHARDO, Linette; (52 pag.)US2019/125746; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem