Category: 4744-50-7

Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: Pyrazines

The amine prepared in Example 8 (87.7 mg, 0.172 mmol, 1 eq.) was dissolved in 6 mL acetone cooled to 0C in an ice bath. To this solution was added 2,3-pyrazinedicarboxylic acid anhydride (25.8 mg, 0.172 mmol, 1 eq.). The yellow solution turned into a suspension and was then stirred room temperature for 10 min. The precipitate was filtered off with suction, washed with acetone, dissolved in methanol and concentrated under reduced pressure to afford 54 mg (51%) of the title product as an orange solid. NMR (400 MHz, DMSO-d6) delta 10.23 (s, 1H), 8.92 (t, J= 5.9 Hz, 1H), 8.80 (d, J= 2.4 Hz, 1H), 8.76 (d, J= 3.4 Hz, 1H), 8.75 (d, J= 2.5 Hz, 1H), 8.51 (d, J= 4.0 Hz, 1H), 8.44 (d, J = 4.0 Hz, 2H), 7.71 (td, J= 7.7, 1.7 Hz, 1H), 7.64 (td, J= 7.7, 1.7 Hz, 2H), 7.53 (d, J= 8.4 Hz, 2H), 7.42 (t, J= 9.2 Hz, 2H), 7.33 (d, J= 7.8 Hz, 1H), 7.28 – 7.15 (m, 5H), 3.76 (s, 2H), 3.72 (s, 4H), 3.49 (dd, J= 14.2, 6.5 Hz, 3H), 3.28 (s, 2H), 2.81 (dt, J= 13.7, 8.2 Hz, 4H), 2.65 (t, J = 6.2 Hz, 2H). 13C NMR (101 MHz, DMSO-d6) delta 169.28, 166.90, 165.62, 163.12, 158.66, 158.42, 149.03, 148.75, 147.71, 146.48, 145.66, 144.90, 143.82, 143.43, 136.84, 136.72, 136.46, 134.16, 128.88, 123.13, 122.87, 122.44, 122.16, 119.27, 60.09, 59.53, 58.08, 54.89, 51.65, 51.16, 48.62, 34.30. APCI-HRMS e/z calc. for C35H37N9O2: 615.3070, found 616.3141 [M+H]

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4744-50-7, its application will become more common.

Reference:
Patent; UNIVERSITETET I OSLO; GOLDING, Louise; RONGVED, Pal; ASTRAND, Ove Alexander H°gmoen; SAMUELSEN, Ørjan; SCHNAARS, Christian; KILDAHL-ANDERSEN, Geir; (234 pag.)WO2018/33719; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4744-50-7, category: Pyrazines

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Pyrazinecarboxylic anhydride, and friends who are interested can also refer to it.

Reference:
Article; Semelkova, Lucia; Jano?cova, Petra; Fernandes, Carlos; Bouz, Ghada; Jand?Ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 22; 9; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 4744-50-7,Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Pyrazinecarboxylic anhydride, its application will become more common.

Reference:
Article; Semelkova, Lucia; Jano?cova, Petra; Fernandes, Carlos; Bouz, Ghada; Jand?Ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 22; 9; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

These common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C6H2N2O3

General procedure: 4-Aminophenyl selenocyanate (2mmol) was dissolved in dry acetone (15mL) and the corresponding anhydride (2mmol) then added. The reaction was then stirred for a variable time of 12h up to 48h at room temperature. Reaction was quenched with water, compound was then filtered and purified by stirring or washing with solvents such as n-hexane and ethyl ether. The chemical shifts assignment in NMR spectroscopy for these compounds is exemplified in Fig.12.

The synthetic route of 2,3-Pyrazinecarboxylic anhydride has been constantly updated, and we look forward to future research findings.

Reference:
Article; Garnica, Pablo; Encio, Ignacio; Plano, Daniel; Palop, Juan A.; Sanmartin, Carmen; European Journal of Medicinal Chemistry; vol. 175; (2019); p. 234 – 246;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 4744-50-7

General procedure: Pyrazine-2,3-dicarboxylic anhydride (1.0 g, 6.7 mmol) was dissolved in tetrahydrofuran (40 mL)in an Erlenmeyer flask and the corresponding substituted aniline (6.7 mmol, 1 equiv.) was added in one dose. The reaction mixture was stirred for 1 hour at laboratory temperature. Water (30 mL) was added into the mixture followed by the saturated aqueous solution of NaHCO3 until pH 6 to form thecorresponding 3-(phenylcarbamoyl)pyrazine-2-carboxylic acid 1-18. Obtained crystals were filtered off and washed with water. The progress of the procedure was monitored by TLC eluted with thesystem water/butanol/acetic acid 5:4:1.

According to the analysis of related databases, 4744-50-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Semelkova, Lucia; Jano?cova, Petra; Fernandes, Carlos; Bouz, Ghada; Jand?Ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 22; 9; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 4744-50-7,Some common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, molecular formula is C6H2N2O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of an appropriate cyclic imides 1-14 (5.0 mmol), 4-(hydrazinecarbonyl)benzenesulfonamide (15) (1.08 g, 5.0 mmol), and anhydroussodium acetate (0.69 g, 5.0 mmol) in glacial acetic acid(20 mL) was heated under reflux for 12 h. After cooling the reactionmixture, the precipitate obtained was filtered, washed with water, driedand re-crystallised from acetic acid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,3-Pyrazinecarboxylic anhydride, its application will become more common.

Reference:
Article; Abdel-Aziz, Alaa A.-M.; El-Azab, Adel S.; Ghiaty, Adel H.; Gratteri, Paola; Supuran, Claudiu T.; Nocentini, Alessio; Bioorganic Chemistry; vol. 83; (2019); p. 198 – 204;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 4744-50-7, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4744-50-7 name is 2,3-Pyrazinecarboxylic anhydride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Step 1. In a (200 mL) round bottom flask, add 2,3-pyrazine dicarboxylic anhydride (1.5 g, 0.01 mol). Under protection, add 100 ml of chloroform, heat to 80 C, stir to dissolve; then add 0.2 g of N, N-diisopropylethylamine (DIPEA) and 0.15 g of 4-dimethylaminopyridine (DMAP), and 10 mL of chloroform dissolved in aza-15-crown ether was added dropwise. 5 (2.19 g, 0,01 mol), about 20 minutes. After the dropwise addition, the reaction was held for 8 hours. After the reaction was completed, the solvent was distilled off under reduced pressure. Agent, add 0.1mol / L sulfuric acid to adjust the pH to 5; add petroleum ether to extract three times. Get “competitive” fluoride ion fluorescent probes Precursor compound 3; Yield: 78%. FIG. 7 shows a synthesis route of a precursor fluoride ion fluorescent probe precursor compound in this example.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,3-Pyrazinecarboxylic anhydride, and friends who are interested can also refer to it.

Reference:
Patent; Xihua University; Wang Huizhen; Yong Xi; Ye Maoping; Zhou Min; Li Xin; Du Bomeng; Li Tingting; (18 pag.)CN110590761; (2019); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

These common heterocyclic compound, 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4744-50-7

General procedure: A solution of substituted benzyl amine (10 mmol) and an acid anhydride (10 mmol) in glacial acetic acid (15mL) was heated under reflux for 4h. After the evaporation of the reaction mixture to dryness under reduced pressure, the residue was neutralised by a solution of sodium bicarbonate (4%) until effervescence ceased. The precipitate obtained was washed with water, dried and re-crystallised from an appropriate solvent.

The synthetic route of 2,3-Pyrazinecarboxylic anhydride has been constantly updated, and we look forward to future research findings.

Reference:
Article; Alanazi, Amer M.; El-Azab, Adel S.; Al-Suwaidan, Ibrahim A.; Eltahir, Kamal Eldin H.; Asiri, Yousif A.; Abdel-Aziz, Naglaa I.; Abdel-Aziz, Alaa A.-M.; European Journal of Medicinal Chemistry; vol. 92; (2015); p. 115 – 123;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 4744-50-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4744-50-7, name is 2,3-Pyrazinecarboxylic anhydride belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

Step 1: 3-(2-Phenyl-imidazo[1,2-a]pyrimidin-7-ylcarbamoyl)-pyrazine-2-carboxylic acid Furo[3,4-b]pyrazine-5,7-dione (736 mg, 4.9 mmol) and DMAP (58 mg, cat.) were added to a solution of 2-phenyl-imidazo[1,2-a]pyrimidin-7-ylamine (example 1, step 1, 1.00 g, 4.8 mmol) in DMF (25 ml). The mixture was heated to 78 C. overnight, and cooled to RT. The formed precipitate was collected by filtration, and residual solvent was removed under vacuum. The thus obtained crude product (800 mg, 47%) was used in the next step without further purification. MS (m/e)=361.3 [M+H+].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,3-Pyrazinecarboxylic anhydride, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Alvarez Sanchez, Ruben; Bleicher, Konrad; Flohr, Alexander; Gobbi, Luca; Groebke Zbinden, Katrin; Koerner, Matthias; Kuhn, Bernd; Peters, Jens-Uwe; Rudolph, Markus; US2011/237564; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4744-50-7 as follows. SDS of cas: 4744-50-7

EXAMPLE 1; Preparation of 3-(5-chloropyrid -2-yl) carbamoyl-pyrazine 2 carboxylic acid; In a clean, dry 500 ml R. B. flask charged acetic anhydride (162 gms) and pyrazine- 2,3, dicarboxylic acid (50 gms). The reaction mass was heated to 100-120 C. up to completion of reaction. After completion of reaction, the excess acetic anhydride was distilled under vacuum. Charged methylene dichloride (350 ml) to the above reaction mass followed by 2-amino-5- chloropyridine (40 gms) in a lot wise manner at room temperature in 30 min. The reaction mass was stirred at room temperature for 2 hrs; cooled the reaction mixture to 5-10 C. for 1 hr. The reaction mixture was filtered and washed with chilled methylene dichloride to obtain 3-(5-chloropyrid -2-yl) carbamoyl-pyrazine-2-carboxylic acid.Yield=82 gms.; EXAMPLE 2; Preparation of 6-(5-chloropyrid-2-yl) 5,7-dioxo-5,6-dihydropyrrolo [3,4-b]-pyrazine; In a clean 500 ml R. B.flask charged pyrazine-2,3-dicaroxylic acid (50 gms) and acetic anhydride (162 gms). The reaction mass was heated to 110-120 C. till the completion of reaction to get pyrazine-2,3-dicarboxylic acid anhydride. After completion of the reaction, excess acetic anhydride distilled out under vacuum and furthermore charged methylene dichloride (315 ml) and 2-amino-5-chloropyridine (40 gms) in a lot wise manner at room temperature in 30 min. Further, reaction mixture was stirred for 2 hours at room temperature. The reaction mass was cooled to 5 to 10 C. for one hour, filtered the product and washed with chilled methylene dichloride. The solid was charged with methylene dichloride (235 ml), triethylamine (40.9 ml) at temp. 0-5 C. followed by ethyl chloroformate (28.1 ml). The reaction mass was stirred at 0-5 C. for 1 hr, added water (200 ml) to the reaction mixture and stirred the mass at room temperature for 1 hr to obtain the solids. The title compound thus separated was isolated by filtration.Yield=65 gms.The HPLC purity of this above product was above 99%.

According to the analysis of related databases, 4744-50-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Sawant, Shrikant Dattatraya; Naik, Anil Mahadev; Kavishwar, Girish Arvind; Kavishwar, Smita Girish; US2008/146800; (2008); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem