A new synthetic route of 2-Methoxypyrazine

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3149-28-8, name is 2-Methoxypyrazine, A new synthetic method of this compound is introduced below., 3149-28-8

First, in a three-neck flask, 11.30 g of 2-methoxypyrazine and 200 mL of diethylether were put, and a dibutyl ether solution (2.1 mol/L) of phenyl lithium was dropped thereto while the mixture was cooled down with ices and stirred under a nitrogen atmosphere, and stirred to be reacted for 20 hours. After the reaction, water was added to the reaction solution, and an organic layer was extracted with ethyl acetate. The obtained organic layer was washed with water, and dried with magnesium sulfate. Magnesium sulfate was removed by filtration and the solvent was distilled off. The obtained residue was refined with a column chromatography using dichloromethane as a development solvent, so that 2-phenyl-3-methoxypyrazine was obtained (light yellow powder, yield: 12%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Semiconductor Energy Labratory Co., Ltd.; US2008/312437; (2008); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Extended knowledge of 3149-28-8

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3149-28-8.

3149-28-8, Adding some certain compound to certain chemical reactions, such as: 3149-28-8, name is 2-Methoxypyrazine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3149-28-8.

To a solution of 2-methoxypyrazine (5.0g, 45.4mmol), in 40ml of anhydrous THF was added tributyltin hydride (15.0mL, 54.9mmol) and the resulting solution stirred under nitrogen at 0C. Cyclohexylcarbonyl chloride (8.0mL, 59.8mmol) was added over 10min and stirring continued until reaction completion in 20min as determined by TLC (neutral alumina, EtOAc/hexanes (1/19, v/v)). A 1M solution of HCl in methanol (20.0mL) was then added to the reaction mixture that was stirred under nitrogen at 0C until reaction completion in 30min as determined by TLC (SiO2, EtOAc/hexanes (2/3, v/v). The reaction mixture was quenched with 50mL of water, extracted with ethyl acetate (3¡Á50mL), washed with saturated sodium bicarbonate (10mL), and then dried over anhydrous Na2SO4. Purification by silica gel flash column chromatography (100% hexanes: to remove tin by-products, followed by methanol / dichloromethane 2-5%) afforded 4-cyclohexanecarbonyl-1,2-dihydro-2-pyrazinone 3 (8.9g, 94%) as a pale yellow solid (mp 160-163C dec).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3149-28-8.

Reference:
Article; Williams, Alfred L.; St. Hilaire, Valentine R.; Tetrahedron; vol. 73; 48; (2017); p. 6712 – 6717;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

The origin of a common compound about 3149-28-8

The synthetic route of 3149-28-8 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3149-28-8, name is 2-Methoxypyrazine belongs to Pyrazines compound, it is a common compound, a new synthetic route is introduced below. 3149-28-8

General procedure: A magnetically stirred solution of xanthate (2.0 equiv) and pyrazine (1.0 equiv) in 1, 2-dichloroethane (1.0mmol/mL according to the xanthate) was refluxed for 15min under a flow of nitrogen. Then dilauroyl peroxide (DLP) was added portionwise (20mol % according to the xanthate) every hour until total consumption of one substrate. The reaction mixture was then cooled to room temperature and the solvent was evaporated under reduced pressure. Unless otherwise specified, the crude product was purified by flash chromatography on silica gel.

The synthetic route of 3149-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Huang, Qi; Qin, Ling; Zard, Samir Z.; Tetrahedron; vol. 74; 40; (2018); p. 5804 – 5817;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 2-Methoxypyrazine

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 3149-28-8, name is 2-Methoxypyrazine, This compound has unique chemical properties. The synthetic route is as follows., 3149-28-8

General procedure: A magnetically stirred solution of xanthate (2.0 equiv) and pyrazine (1.0 equiv) in 1, 2-dichloroethane (1.0mmol/mL according to the xanthate) was refluxed for 15min under a flow of nitrogen. Then dilauroyl peroxide (DLP) was added portionwise (20mol % according to the xanthate) every hour until total consumption of one substrate. The reaction mixture was then cooled to room temperature and the solvent was evaporated under reduced pressure. Unless otherwise specified, the crude product was purified by flash chromatography on silica gel.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Huang, Qi; Qin, Ling; Zard, Samir Z.; Tetrahedron; vol. 74; 40; (2018); p. 5804 – 5817;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Share a compound : 3149-28-8

The synthetic route of 3149-28-8 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3149-28-8, name is 2-Methoxypyrazine belongs to Pyrazines compound, it is a common compound, a new synthetic route is introduced below. 3149-28-8

1.9 g (0.017 mol) of 30 % hydrogen peroxide are added to a solution of 1.1 g (0.01 mol) of 2-methoxy-pyrazine in 3 ml of glacial acetic acid and the resulting solution is heated at 65-68C for 17 hours. The solution is concentrated to 1/3 of the original volume, diluted with the same amount of water and concentrated again. The residue is extracted with chloroform and the combined organic phases are washed with saturated sodium chloride solution and dried over sodium sulfate. After concentration, two amounts, each of 25 ml, of toluene are added to the residue obtained and are concentrated again. The desired title compound, which can be used directly for further reactions, is obtained in a yield of 0.98 g (77 % of theory). ‘H NMR (300 MHz, CDCI3) : 7.988 ppm (d (J=4.2 Hz), 1 H) ; 7.766-7. 773 ppm (m, 1 H) ; 7.745 ppm (dxd (J=4.2 and 1.5 Hz), 1 H) ; 3.995 ppm (s, 3H).

The synthetic route of 3149-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SYNGENTA PARTICIPATIONS AG; WO2003/87067; (2003); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem