Category: 21279-62-9

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21279-62-9 as follows. Quality Control of 3-Chloropyrazine-2-carboxamide

General procedure: The starting compound (1.27 mmol) was treated with 18 aliphatic amines, alicyclic amines or saturated heterocycles containing at least one nitrogen atom (2.54 mmol). Four reactions were completed by conventional heating methods. The conditions were 110 C, toluene as a solvent and pyridine (1.27 mmol) as a base. The reaction time was set to one hour. Then the reactions were completed using the microwave reactor with focused field and conditions used for syntheses were 140 C, 30 min,120 W, methanol used as a solvent and pyridine (1.27 mmol) as a base. They were set experimentally with respect to prior experience. The progress of reaction was monitored with TLC in system hexane/ethyl acetate (1:1). Then the mixture was separated by flash column chromatograph using gradient elution. Mobile phases were hexane and ethyl acetate again.

According to the analysis of related databases, 21279-62-9, the application of this compound in the production field has become more and more popular.

Application of 21279-62-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 21279-62-9 name is 3-Chloropyrazine-2-carboxamide, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: The starting compound (1.27 mmol) was treated with 18 aliphatic amines, alicyclic amines or saturated heterocycles containing at least one nitrogen atom (2.54 mmol). Four reactions were completed by conventional heating methods. The conditions were 110 C, toluene as a solvent and pyridine (1.27 mmol) as a base. The reaction time was set to one hour. Then the reactions were completed using the microwave reactor with focused field and conditions used for syntheses were 140 C, 30 min,120 W, methanol used as a solvent and pyridine (1.27 mmol) as a base. They were set experimentally with respect to prior experience. The progress of reaction was monitored with TLC in system hexane/ethyl acetate (1:1). Then the mixture was separated by flash column chromatograph using gradient elution. Mobile phases were hexane and ethyl acetate again.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloropyrazine-2-carboxamide, and friends who are interested can also refer to it.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 21279-62-9, name is 3-Chloropyrazine-2-carboxamide, This compound has unique chemical properties. The synthetic route is as follows., name: 3-Chloropyrazine-2-carboxamide

General procedure: Compounds 1-6 were prepared according to conventional organic synthesis methods. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was dissolved in THF (20 mL) in a round bottom flask and after that treated with two equivalents of the corresponding benzylamine and an equimolar amount of triethylamine. The reaction was conducted with continuous stirring and heating (70 C) under reflux in an oil bath for 15 h. Compounds 7-15 were synthesised using a microwave reactor with a focused field. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was put into a thick-walled tube together with the corresponding benzylamine (2.54 mmol), pyridine (1.27 mmol), methanol (approx. 5 mL) and a magnetic stir bar and then sealed with a special cap. The reaction parameters were set according to the previously published paper as follows-140 C, 30 min, 200 W [29]. Reaction progress was checked by TLC (hexane:ethyl acetate-1:1). Regardless of the synthesis method used,all reaction mixtures were adsorbed on silica and subjected to preparative flash chromatography (hexane and ethyl acetate, gradient elution, detection wavelengths 260 nm and 280 nm). Products were recrystallized from ethanol or ethanol and water if necessary. All final substances were chemically characterized (1H-NMR, 13C-NMR, IR, melting point and elemental analysis).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 21279-62-9.

Reference:
Article; Jandourek, Ondrej; Tauchman, Marek; Paterova, Pavla; Konecna, Klara; Navratilova, Lucie; Kubicek, Vladimir; Holas, Ondrej; Zitko, Jan; Dolezal, Martin; Molecules; vol. 22; 2; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

21279-62-9, name is 3-Chloropyrazine-2-carboxamide, belongs to Pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. HPLC of Formula: C5H4ClN3O

General procedure: Compounds 1-6 were prepared according to conventional organic synthesis methods. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was dissolved in THF (20 mL) in a round bottom flask and after that treated with two equivalents of the corresponding benzylamine and an equimolar amount of triethylamine. The reaction was conducted with continuous stirring and heating (70 C) under reflux in an oil bath for 15 h. Compounds 7-15 were synthesised using a microwave reactor with a focused field. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was put into a thick-walled tube together with the corresponding benzylamine (2.54 mmol), pyridine (1.27 mmol), methanol (approx. 5 mL) and a magnetic stir bar and then sealed with a special cap. The reaction parameters were set according to the previously published paper as follows-140 C, 30 min, 200 W [29]. Reaction progress was checked by TLC (hexane:ethyl acetate-1:1). Regardless of the synthesis method used,all reaction mixtures were adsorbed on silica and subjected to preparative flash chromatography (hexane and ethyl acetate, gradient elution, detection wavelengths 260 nm and 280 nm). Products were recrystallized from ethanol or ethanol and water if necessary. All final substances were chemically characterized (1H-NMR, 13C-NMR, IR, melting point and elemental analysis).

The synthetic route of 21279-62-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jandourek, Ondrej; Tauchman, Marek; Paterova, Pavla; Konecna, Klara; Navratilova, Lucie; Kubicek, Vladimir; Holas, Ondrej; Zitko, Jan; Dolezal, Martin; Molecules; vol. 22; 2; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21279-62-9 as follows. Product Details of 21279-62-9

General procedure: The starting compound (1.27 mmol) was treated with 18 aliphatic amines, alicyclic amines or saturated heterocycles containing at least one nitrogen atom (2.54 mmol). Four reactions were completed by conventional heating methods. The conditions were 110 C, toluene as a solvent and pyridine (1.27 mmol) as a base. The reaction time was set to one hour. Then the reactions were completed using the microwave reactor with focused field and conditions used for syntheses were 140 C, 30 min,120 W, methanol used as a solvent and pyridine (1.27 mmol) as a base. They were set experimentally with respect to prior experience. The progress of reaction was monitored with TLC in system hexane/ethyl acetate (1:1). Then the mixture was separated by flash column chromatograph using gradient elution. Mobile phases were hexane and ethyl acetate again.

According to the analysis of related databases, 21279-62-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Jandourek, Ondrej; Dolezal, Martin; Kunes, Jiri; Kubicek, Vladimir; Paterova, Pavla; Pesko, Matus; Buchta, Vladimir; Kralova, Katarina; Zitko, Jan; Molecules; vol. 19; 7; (2014); p. 9318 – 9338;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 21279-62-9, These common heterocyclic compound, 21279-62-9, name is 3-Chloropyrazine-2-carboxamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Compounds 1-6 were prepared according to conventional organic synthesis methods. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was dissolved in THF (20 mL) in a round bottom flask and after that treated with two equivalents of the corresponding benzylamine and an equimolar amount of triethylamine. The reaction was conducted with continuous stirring and heating (70 C) under reflux in an oil bath for 15 h. Compounds 7-15 were synthesised using a microwave reactor with a focused field. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was put into a thick-walled tube together with the corresponding benzylamine (2.54 mmol), pyridine (1.27 mmol), methanol (approx. 5 mL) and a magnetic stir bar and then sealed with a special cap. The reaction parameters were set according to the previously published paper as follows-140 C, 30 min, 200 W [29]. Reaction progress was checked by TLC (hexane:ethyl acetate-1:1). Regardless of the synthesis method used,all reaction mixtures were adsorbed on silica and subjected to preparative flash chromatography (hexane and ethyl acetate, gradient elution, detection wavelengths 260 nm and 280 nm). Products were recrystallized from ethanol or ethanol and water if necessary. All final substances were chemically characterized (1H-NMR, 13C-NMR, IR, melting point and elemental analysis).

Statistics shows that 3-Chloropyrazine-2-carboxamide is playing an increasingly important role. we look forward to future research findings about 21279-62-9.

Reference:
Article; Jandourek, Ondrej; Tauchman, Marek; Paterova, Pavla; Konecna, Klara; Navratilova, Lucie; Kubicek, Vladimir; Holas, Ondrej; Zitko, Jan; Dolezal, Martin; Molecules; vol. 22; 2; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 21279-62-9, name is 3-Chloropyrazine-2-carboxamide, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 21279-62-9

General procedure: The starting compound (1.27 mmol) was treated with 18 aliphatic amines, alicyclic amines or saturated heterocycles containing at least one nitrogen atom (2.54 mmol). Four reactions were completed by conventional heating methods. The conditions were 110 C, toluene as a solvent and pyridine (1.27 mmol) as a base. The reaction time was set to one hour. Then the reactions were completed using the microwave reactor with focused field and conditions used for syntheses were 140 C, 30 min,120 W, methanol used as a solvent and pyridine (1.27 mmol) as a base. They were set experimentally with respect to prior experience. The progress of reaction was monitored with TLC in system hexane/ethyl acetate (1:1). Then the mixture was separated by flash column chromatograph using gradient elution. Mobile phases were hexane and ethyl acetate again.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 21279-62-9.

Reference:
Article; Jandourek, Ondrej; Dolezal, Martin; Kunes, Jiri; Kubicek, Vladimir; Paterova, Pavla; Pesko, Matus; Buchta, Vladimir; Kralova, Katarina; Zitko, Jan; Molecules; vol. 19; 7; (2014); p. 9318 – 9338;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 21279-62-9, name is 3-Chloropyrazine-2-carboxamide, belongs to Pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 21279-62-9, name: 3-Chloropyrazine-2-carboxamide

General procedure: Compounds 1-6 were prepared according to conventional organic synthesis methods. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was dissolved in THF (20 mL) in a round bottom flask and after that treated with two equivalents of the corresponding benzylamine and an equimolar amount of triethylamine. The reaction was conducted with continuous stirring and heating (70 C) under reflux in an oil bath for 15 h. Compounds 7-15 were synthesised using a microwave reactor with a focused field. 3-Chloropyrazine-2-carboxamide (1.27 mmol) was put into a thick-walled tube together with the corresponding benzylamine (2.54 mmol), pyridine (1.27 mmol), methanol (approx. 5 mL) and a magnetic stir bar and then sealed with a special cap. The reaction parameters were set according to the previously published paper as follows-140 C, 30 min, 200 W [29]. Reaction progress was checked by TLC (hexane:ethyl acetate-1:1). Regardless of the synthesis method used,all reaction mixtures were adsorbed on silica and subjected to preparative flash chromatography (hexane and ethyl acetate, gradient elution, detection wavelengths 260 nm and 280 nm). Products were recrystallized from ethanol or ethanol and water if necessary. All final substances were chemically characterized (1H-NMR, 13C-NMR, IR, melting point and elemental analysis).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Chloropyrazine-2-carboxamide, and friends who are interested can also refer to it.

Reference:
Article; Jandourek, Ondrej; Tauchman, Marek; Paterova, Pavla; Konecna, Klara; Navratilova, Lucie; Kubicek, Vladimir; Holas, Ondrej; Zitko, Jan; Dolezal, Martin; Molecules; vol. 22; 2; (2017);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 21279-62-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 21279-62-9 as follows.

General procedure: The starting compound (1.27 mmol) was treated with 18 aliphatic amines, alicyclic amines or saturated heterocycles containing at least one nitrogen atom (2.54 mmol). Four reactions were completed by conventional heating methods. The conditions were 110 C, toluene as a solvent and pyridine (1.27 mmol) as a base. The reaction time was set to one hour. Then the reactions were completed using the microwave reactor with focused field and conditions used for syntheses were 140 C, 30 min,120 W, methanol used as a solvent and pyridine (1.27 mmol) as a base. They were set experimentally with respect to prior experience. The progress of reaction was monitored with TLC in system hexane/ethyl acetate (1:1). Then the mixture was separated by flash column chromatograph using gradient elution. Mobile phases were hexane and ethyl acetate again.

According to the analysis of related databases, 21279-62-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Jandourek, Ondrej; Dolezal, Martin; Kunes, Jiri; Kubicek, Vladimir; Paterova, Pavla; Pesko, Matus; Buchta, Vladimir; Kralova, Katarina; Zitko, Jan; Molecules; vol. 19; 7; (2014); p. 9318 – 9338;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 21279-62-9, These common heterocyclic compound, 21279-62-9, name is 3-Chloropyrazine-2-carboxamide, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: The starting compound (1.27 mmol) was treated with 18 aliphatic amines, alicyclic amines or saturated heterocycles containing at least one nitrogen atom (2.54 mmol). Four reactions were completed by conventional heating methods. The conditions were 110 C, toluene as a solvent and pyridine (1.27 mmol) as a base. The reaction time was set to one hour. Then the reactions were completed using the microwave reactor with focused field and conditions used for syntheses were 140 C, 30 min,120 W, methanol used as a solvent and pyridine (1.27 mmol) as a base. They were set experimentally with respect to prior experience. The progress of reaction was monitored with TLC in system hexane/ethyl acetate (1:1). Then the mixture was separated by flash column chromatograph using gradient elution. Mobile phases were hexane and ethyl acetate again.

The synthetic route of 21279-62-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Jandourek, Ondrej; Dolezal, Martin; Kunes, Jiri; Kubicek, Vladimir; Paterova, Pavla; Pesko, Matus; Buchta, Vladimir; Kralova, Katarina; Zitko, Jan; Molecules; vol. 19; 7; (2014); p. 9318 – 9338;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem