Category: 19745-07-4

Adding a certain compound to certain chemical reactions, such as: 19745-07-4, name is 2,5-Dichloropyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19745-07-4, Safety of 2,5-Dichloropyrazine

Intermediate C-5 2-chloro-3-((5-chloropyrazin-2-yl)thio)aniline A mixture of 3-amino-2-chlorobenzenethiol (724 mg, 3.69 mmol), 2,5- dichloropyrazine (500 mg, 3.36 mmol), and potassium carbonate (1.39 g, 10.07 mmol) in DMF/MeCN (1/1, 20 mL) was stirred for 4 h at 85 °C. After cooling to RT, the reaction mixture was filtrered through a pad of Celite followed by MeCN (10 mL) wash. The combined filtrates were concentrated under reduced pressure and the resulting residue was purified by silica chromatography (0 to 20percent gradient of EtO Ac/heptane) to give 2-chloro-3-((5-chloropyrazin-2- yl)thio)aniline (285 mg, 1.037 mmol). MS m/z. 272.1 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,5-Dichloropyrazine, and friends who are interested can also refer to it.

Reference:
Patent; NOVARTIS AG; CHEN, Zhuoliang; FORTANET, Jorge Farcia; JOUK, Andriana; KARKI, Rajesh; LAMARCHE, Matthew J.; LIU, Gang; PALERMO, Mark G.; PEREZ, Lawrence Blas; SARVER, Patrick James; SHULTZ, Michael David; SENDZIK, Martin; TOURE, Bakary-Barry; YU, Bing; (173 pag.)WO2016/203406; (2016); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 19745-07-4, name is 2,5-Dichloropyrazine, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C4H2Cl2N2

Preparation of N-fdelta-chloroDyrazin^-vD-N-methylethanesulfonamide (SM-9):(SM-9)To a solution of N-methyl-ethanesufonamide (400 mg, 3.25 mmol) in methanol (2.2 ml_) was added potassium hydroxide (85percent, 214 mg, 3.25 mmol). Solvent was removed and the potassium salt was suspended in dimethylsulfoxide (1.0 ml_) and added to a stirred solution of 2,5- dichloropyrazine (484 mg, 3.25 mmol) in dimethylsufoxide (1.0 ml_). The resulting dark colored reaction mixture was stirred at room temp for 45 minutes. The reaction mixture was quenched in ice water and the dark suspension was extracted three times with dichloromethane. The combined organics were washed with brine, dried over sodium sulfate and flash chromatographed eluting with a 0-40percent gradient of ethyl acetate in heptane to afford N-(5-chloropyrazin-2-yl)-N-methyl ethanesulfonamide (SM-9: 195 mg, 25.5percent).1H NMR (400 MHz, CHLOROFORM-d) ppm 1.32 (t, J=7.43 Hz, 3 H), 3.26 (q, J=7.30 Hz, 2 H), 3.42 (s, 3 H), 8.32 (d, J=1.37 Hz, 1 H), 8.56 (d, J=1.17 Hz, 1 H). MS (M+1 ) 236.0.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 19745-07-4.

Reference:
Patent; PFIZER INC.; CORBETT, Jeffrey Wayne; GUZMAN-PEREZ, Angel; PFEFFERKORN, Jeffrey Allen; TU, Meihua Mike; WO2010/103438; (2010); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 19745-07-4, A common heterocyclic compound, 19745-07-4, name is 2,5-Dichloropyrazine, molecular formula is C4H2Cl2N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 3: Synthesis of 1-(1-(5-chloropyrazin-2-yl)piperidin-4-yl)ethanol To a stirred solution of 2,5-dichloropyrazine (0.09 g, 0.608 mmol) and 1-(piperidin-4-yl)ethanol hydrochloride (0.12 g, 0.729 mmol) in DMF (5 mL) was added potassium carbonate under nitrogen and heated 12 h at 100° C. Progress of reaction was monitored by TLC. After reaction completion reaction mass was diluted with water and extracted with ethyl acetate. The organic layer was washed with brine, dried over sodium sulphate and concentrated under reduced pressure to give crude product. Crude was purified by silica gel (100-200 mesh) column chromatography using 20percent ethyl acetate in hexane as eluent to obtain 1-(1-(5-chloropyrazin-2-yl)piperidin-4-yl)ethanol (0.08 g, 54.6percent) as yellow oil. MS: 242.7 [M++1]

The synthetic route of 19745-07-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Mankind Pharma Ltd.; Patil, Rakesh Ishwar; Verma, Jeevan; Shah, Dharmesh; Ali, Sazid; Bapuram, Srinivasa Reddy; Rai, Santosh Kumar; Kumar, Anil; (146 pag.)US2017/291910; (2017); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 19745-07-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 19745-07-4 as follows.

Example 4(S)- 1 -( 1 -(5 -chloropyrazin-2-yl)piperidin-4-yl)-3 -(2-fluoro-4- (methylsulfonyl) henylamino)pyrrolidin-2-one[00396] To a solution of (S)-3-(2-fluoro-4-(methylsulfonyl)phenylamino)-l-(piperidin-4-yl)pyrrolidin-2-one (Preparation E; 3 g, 8.44 mmol) and DIEA (7.35 mL, 42.2 mmol) in DMF (30mL) was added 2,5-dichloropyrazine (2.51 g, 16.9 mmol). This mixture was degassed with nitrogen for 30 minutes then stirred at 100 °C for 4 hours under nitrogen. The mixture was poured into brine (500 mL) and extracted into ethyl acetate (3 x 100 mL). The combined organic layers were dried over MgS04, filtered and concentrated in vacuo to give an oil. Diethyl ether (200 mL) was added and a precipitate formed overnight. The ether was decanted and the solid was triturated using ethanol (100 mL) at reflux with stirring for 5 minutes. The suspension was filtered and the solid was washed using ethanol to give a solid crystal. This solid was dried over the weekend under high vacuum to provide the title compound (2.9 g, 73percent yield). Mass spectrum (apci) m/z = 468.1 (M+H). 397

According to the analysis of related databases, 19745-07-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ARRAY BIOPHARMA INC.; AICHER, Thomas Daniel; BENCSIK, Josef Roland; BOYD, Steven Armen; CONDROSKI, Kevin Ronald; FELL, Jay Bradford; FISCHER, John P.; HINKLIN, Ronald Jay; PRATT, Scott Alan; SINGH, Ajay; TURNER, Timothy M.; WO2011/146335; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 19745-07-4,Some common heterocyclic compound, 19745-07-4, name is 2,5-Dichloropyrazine, molecular formula is C4H2Cl2N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation of 4-benzyl- 1 -(5-chloropyrazin-2-yl)piperidin-4-amine. To a solution of 2,5-dichloropyrazine (0.1316 mL, 0.7243 mmol) in DMSO (10 mL) were added K2CO3 (300.3 mg, 2.173 mmol) followed by 4-benzylpiperidin-4-amine bis(2,2,2- trifluoroacetate) (303 mg, 0.72 mmol). The reaction was sealed and heated at 75 °C overnight. After cooling to RT, the reaction was diluted with EtOAc (10 mL) and water (20 mL). After phase-separation, the aqueous was extracted with EtOAc (2x). The combined organic extracts were concentrated and used directly in the next step. MS (apci) m/z = 303.1 (M+H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2,5-Dichloropyrazine, its application will become more common.

Reference:
Patent; ANDREWS, Steven W.; ARONOW, Sean; BLAKE, James F.; BRANDHUBER, Barbara J.; COLLIER, James; COOK, Adam; HAAS, Julia; JIANG, Yutong; KOLAKOWSKI, Gabrielle R.; MCFADDIN, Elizabeth A.; MCKENNEY, Megan L.; MCNULTY, Oren T.; METCALF, Andrew T.; MORENO, David A.; RAMANN, Ginelle A.; TANG, Tony P.; REN, Li; WALLS, Shane M.; (946 pag.)WO2018/71454; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 19745-07-4,Some common heterocyclic compound, 19745-07-4, name is 2,5-Dichloropyrazine, molecular formula is C4H2Cl2N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of (4-methyl-4-((3-(trifluoromethyl)phenyl)sulfonyl)tetrahydro-2H-pyran-2-yl)methanol (1 g, 2.9 mmol, 1 eq) in toluene (20 mL) was added 2,5-dichloro-pyrazine (0.3 mL, 2.9 mmol, 1 eq), Cs2CO3 (1.8 g, 5.9 mmol, 2 eq) and the mixture was heated to reflux for 48 h. Then the reaction mass was cooled to RT, diluted with H20 (15 mL), extracted with EtOAc (2×30 mL), washed with brine (20 mL),dried over Na2SO4 and concentrated. The crude product was purified by CC to afford 2-chloro-5-((4- methyl-4-((3-(trifluoromethyl)phenyl)sulfonyl)tetrahydro-2H-pyran-2-yl)methoxy)pyrazine (0.7 g, 53percent) as yellow gum.

The synthetic route of 19745-07-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GRUeNENTHAL GMBH; SCHUNK, Stefan; REICH, Melanie; JAKOB, Florian; DAMANN, Nils; HAURAND, Michael; KLESS, Achim; ROGERS, Marc; SUTTON, Kathy; WO2015/158427; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 19745-07-4, name is 2,5-Dichloropyrazine, This compound has unique chemical properties. The synthetic route is as follows., category: Pyrazines

Add [1,1′-bis(diphenylphosphino)ferrocene]dichloropalladium(II) (0.445 g, 0.596 5 mmol) to the suspensions ofmethyl1-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2yl)phenyl]cyclo propanecarboxylate (2.00 g, 5.4 mmol,), sodium carbonate (1.26 g, 11.9 mmol) and 2,5-dichloropyrazine (8.93 mmol) in 1,4-dioxane (20 mL) and water (4 mL) under N2. Then the reaction mixture is stirred at 100 oc for 3 h under N2. The reaction mixture is concentrated to give a black solid. The mixture is diluted with water (20 mL) and 10 extracted with EtOAc (30 mL x 3). The combined organic layers are washed with brine (20 mL), dried over anhydrous Na2S04, filtered and evaporated to afford the crude product. The crude product is purified by flash chromatography eluting with petroleum ether: EtOAc (1 :2) to afford title compound (1.0 g 57.6percent) as a yellow solid, LCMS (m/z): 288.9 [M+Ht. 1H NMR (400 MHz, CD3Cl) 8 = 8.80 (d, J = 1.2 Hz, 1H), 8.65 (d, J = 1.2 Hz, 1H), 7.96 (d, J 15 = 8.4 Hz, 2H), 7.51 (d, J= 8.4 Hz, 2H), 3.67 (s, 3H), 1.72- 1.66 (m, 2H), 1.28- 1.23 (m, 2H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 19745-07-4.

Reference:
Patent; ELI LILLY AND COMPANY; LILLY CHINA RESEARCH AND DEVELOPMENT CO., LTD.; MA, Tianwei; WU, Liang; ZHANG, Xuejun; (109 pag.)WO2019/41340; (2019); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 19745-07-4, name is 2,5-Dichloropyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19745-07-4, Product Details of 19745-07-4

Step 3: te^butyl-l’-^-chloropyrazin^-yO^^’-bipiperdine-l-carboxylate.; The tert-butyl 4,4′-bipiperidine-l-carboxylate (1.27g, 4.7 mmol) and 2,5-dichloropyrazine (670 mg, 4.5 mmol) were dissolved in NMP (5 ml) at room temperature, and l,8-diazabicyclo[5.4.0]-undec-7-ene (1 mL, 6.8 mmol) added drop-wise. The mixture was heated at 110 0C for Ih, allowed to cool to r.t. and diluted with 50 mL of ethyl acetate. The solution was washed with water (10 mL xl), brine (10 mL xl), dried over magnesium sulfate, filtered, and concentrated in vac. The residue was purified by chromatography on silica gel with 10percent acetone : hexanes to yield the title compound. LC-MS: 381.25 (M+H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; MERCK & CO., INC.; WO2008/85316; (2008); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 19745-07-4, name is 2,5-Dichloropyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19745-07-4, category: Pyrazines

Example 9 N-[(1S,2S)-2-[(5-Chloropyrazin-2-yl)amino]cyclopentyl]-5-methyl-2-(2H-1,2,3-triazol-2-yl)benzamide To a solution of N-[(1S,2S)-2-aminocyclopentyl]-5-methyl-2-(2H-1,2,3-triazol-2-yl)benzamide hydrochloride (Intermediate 7; 100 mg, 0.31 mmol) in NMP (1.0 ml) was added DIPEA (160 mg, 1.24 mmol) and 2,5-dichloropyrazine (CAS number 19745-07-4; 92 mg, 0.62 mmol). The resulting reaction mixture was stirred and heated under microwave irradiation at 180° C. for 15 minutes. Upon completion, the reaction mixture was poured into water (3 ml) and extracted with ethyl acetate (3*10 ml). The combined organics were dried over sodium sulfate and concentrated in vacuo. The crude product was purified by reverse phase preparative HPLC (eluted with acetonitrile/water containing 0.1percent ammonia) to afford the title compound. 1H NMR (DMSO-d6) delta ppm 1.44-1.56 (m, 2H), 1.62-1.68 (m, 2H), 1.92-2.04 (m, 2H), 2.38 (s, 3H), 4.01-4.10 (m, 2H), 7.19 (s, 1H), 7.28-7.30 (m, 1H), 7.39-7.41 (m, 1H), 7.62-7.64 (m, 1H), 7.80-7.81 (s, 1H), 7.93 (s, 2H), 8.03 (s, 1H), 8.35-8.37 (m, 1H) MS ES+: 398

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2,5-Dichloropyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Takeda Pharmaceutical Company Limited; Fieldhouse, Charlotte; Glen, Angela; Maine, Stephanie; Fujimoto, Tatsuhiko; Robinson, John Stephen; US2015/232460; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 19745-07-4, name is 2,5-Dichloropyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 19745-07-4, COA of Formula: C4H2Cl2N2

Into a 250 ml 3-necked round bottom flask, was placed 45% hydriodic acid (60 ml). To this was added sodium iodide (25 g, 0.17 mol). To the mixture was added XV-B-86 (10.5 g, 0.07 mol). The resulting solution was allowed to react at room temperature. Adjustment of the pH to >8 was accomplished by the addition of 20 g NaOH in 50 g ice to afford XV-C-86.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Kalypsys, Inc.; US2005/234046; (2005); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem