Category: 16298-03-6

Reference of 16298-03-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16298-03-6 as follows.

Step 1a: Methyl 3-[(2,4-dimethoxybenzyl)amino]pyrazine-2-carboxylate Sodium triacetoxyborohydride (7.82 g, 36.89 mmol) was added to a mixture of methyl 3-aminopyrazine-2-carboxylate (4.00 g, 26.12 mmol) and 2,4-dimethoxybenzaldehyde (4.83 g, 29.04 mmol) in 1,2-dichloroethane (90 ml). The reaction was continued at room temperature for 24 hours. Sodium triacetoxyborohydride (13.0 g, 61.34 mmol) and 2,4-dimethoxybenzaldehyde (8.0 g, 48.14 mmol) were added and the reaction continued at room temperature over night. Water and DCM were added and the phases separated. The product was purified further by flash chromatography (SiO2, heptane:ethyl acetate, product came at 50percent ethyl acetate) and recrystallisation (DCM/heptane) to give a slightly yellow solid (5.00 g, 63percent). 1H NMR (400 MHz, CDCl3) delta 8.35-8.27 (br, 1H), 8.22 (d, 1H), 7.82 (d, 1H), 7.20 (d, 1H), 6.48-6.43 (m, 1H), 6.43-6.37 (m, 1H), 4.63 (d, 2H), 3.93 (s, 3H), 3.84 (s, 3H), 3.77 (s, 3H). MS m/z 304 (M+H)+.

According to the analysis of related databases, 16298-03-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Cheng, Leifeng; Jonforsen, Maria; Schell, Peter; US2009/88439; (2009); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 16298-03-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16298-03-6 as follows.

1.5 equivalents of N-iodosuccinimide are added at room temperature to 5 g (32.7 mmol) of a methyl 3-aminopyrazine-2-carboxylate solution in 25 ml of dimethylformamide. The reaction medium is heated at 65°C for 1 hour, added together with 0.5 equivalents of N-iodosuccinimide and maintained at 65°C for 24 hours. After returning to room temperature, the solvent is evaporated and then the product is extracted several times with dichloromethane. The organic phases are combined, washed with 10percent sodium bisulfite solution, dried on magnesium sulfate and concentrated to yield 8 g (88percent) of methyl 3-amino-6-iodopyrazine-2-carboxylate in the form of a yellow solid.LCMS (EI, m/z): (M+l) 2801H NMR: 6H ppm (400 MHz, DMSO): 8.50 (1H, s, CHarom), 7.50 (2H, bs, NH2), 3.20 (3H, s, CH3).

According to the analysis of related databases, 16298-03-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PIERRE FABRE MEDICAMENT; KALOUN, El Bachir; BEDJEGUELAL, Karim; RABOT, Remi; KRUCZYNSKI, Anna; SCHMITT, Philippe; PEREZ, Michel; RAHIER, Nicolas; WO2012/101239; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 16298-03-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 2 Synthesis of 3-Aminopyrazine-2-carboxamide (Intermediate 1) A solution of 3-amino-pyrazine-2-carboxylic acid methyl ester (5.0 g, 33 mmol) in concentrated ammonium hydroxide solution (30 mL) was heated at 60 C. for 3 h. The mixture was cooled to RT and the resulting solid filtered. After thoroughly washed with water followed by ether, the title compound was obtained as a brown solid (3.7 g, 82%). 1H NMR (500 MHz, DMSO-d6): delta 8.19 (d, J=2.4 Hz, 1H), 8.07 (br s, 2H), 7.80 (d, J=2.4 Hz, 1H), 7.59 (br s, 2H). MS (ES+): m/z 139 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-aminopyrazine-3-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TargeGen, Inc.; US2007/259876; (2007); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 16298-03-6, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 16298-03-6 as follows.

To a solution of methyl 3-amino- pyrazine-2- carboxylate (5.00 g, 32.7 mmol) in 1,2-dimethoxyethane (80 mL) were added ?2 (4.14 g, 16.3 mmol), copper(I) iodide (1.87 g, 9.80 mmol) and cesium iodide (8.48 g, 32.7 mmol) undernitrogen. Then isoamyl nitrite (13.2 mL, 98.0 mmol) was added dropwise at 20 °C. The reaction was stirred at 75 °C for 2 h, then quenched with water (100 mL). The aqueous layer was extracted with EtOAc (100 mL x 3). The combined organic layers were washed with brine (30 mL), dried over anhydrous MgSO4 and filtered. The filtrate was concentrated in vacuo to give a residue, which was purified by silica gel chromagraphy eluting withPE/EtOAc (5i02, PE: EtOAc = 1: O1O:1, v/v) to give the title compound. MS (ESI) mlz:264.7 [M+Hj ?H NMR (400MHz, DMSO-d6) oe = 8.71 (d, J=2.2 Hz, 1H), 8.63 (d, J2.0Hz, 1H), 3.93 (s, 3H)

According to the analysis of related databases, 16298-03-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MILLER, Michael; CHOBANIAN, Harry, R.; HE, Shuwen; HAO, Jinsong; PIO, Barbara; GUO, Yan; XIAO, Dong; (213 pag.)WO2018/118670; (2018); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 16298-03-6, Recommanded Product: Methyl 2-aminopyrazine-3-carboxylate

Compound 2 (27.6 g, leq) was added to acetonitrile (276 ml)Stir at room temperature,NBS (25.1 g, 1.01 eq) was added in portions,Stirred at room temperature overnight,TLC showed that after the reaction (20 ~ 30 h)Add water (300 ml)The pH was adjusted to 7 with Na2CO3 solution,Ethyl acetate extraction (3 x 50 ml),Combined organic phase,Dried over anhydrous sodium sulfate and filtered,The solvent was distilled off under reduced pressure,To give crude 3-amino-6-bromopyrazine-2-carboxylic acid methyl ester,30 times the dichloromethane was added (the weight ratio of the crude product to methylene chloride was 1:25 C)50) After refluxing for 0.5 h,Filter,The mother liquor was distilled off to dichloromethane,And then 20 times the ethanol (steamed and ethanol weight ratio of 1:5 to 30) recrystallization,Crystallization at 25 to 30 C gives a pale yellow solid 3,Yield 89%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-aminopyrazine-3-carboxylate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Central South University; Liu Fengliang; Li Cuiqin; (19 pag.)CN106866553; (2017); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below. COA of Formula: C6H7N3O2

Example 81; Synthesis of (3,5-bis-trifluoromethyl-benzyl)- [3-(cycIopentylmethyl-ethyl-amino)- pyrazin-2-ylmethyl]-carbamic acid methyl ester; Step (i): Synthesis of 3-bromo-pyrazine-2-carboxylic acid methyl ester; Copper bromide (1.36 g, 6.1 mmol) and .pound.-butyl nitrite (0.78 g, 7.6 mmol) were added to a 50 mL round bottom flask along with acetonitrile (2 niL), and this mixture was heated at 60 0C for 5 min. After this time, 3-amino-pyrazine-2-carboxylic acid methyl ester (0.8 g, 5.09 mmol) was added portion- wise, with stirring, and stirring was continued at the same temperature for another 10 min. The reaction mixture was then cooled to RT, poured into 100 mL of dilute HCL (2N), and then extracted with diethyl ether (3 x 50 mL). The combined organic layer was washed with dilute HCl, dried over sodium sulfate, and then concentrated under vacuum to afford the title compound (0.139 g), yield: 12 percent.1H NMR (CDCl3, 400 MHz): d 8.58 (m, 2H), 4.04 (s, 3H)) ; m/z (CI-MS) 217 (M+) ; IR (neat, cm-1): 3385, 2955, 1742

The synthetic route of 16298-03-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REDDY US THERAPEUTICS, INC.; BARUAH, Anima; DE, Dibyendu; KHANNA, Ish Kumar; PILLARISETTI, Sivaram; MAITRA, Santanu; ALEXANDER, Christopher, W.; SREENU, Jennepalli; DAGER, Indu; WO2006/73973; (2006); A2;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Some common heterocyclic compound, 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate, molecular formula is C6H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: Methyl 2-aminopyrazine-3-carboxylate

3-Aminopyrazine-2-carboxylic acid methyl ester (0.8 g, 5.2 mmol) and 3-bromopyridine (1.2 g, 7.8 mmol) were dissolved in 20 mL dry toluene. 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (0.6 g, 1.04 mmol), sodium tert.-butylate (0.75 g, 7.8 mmol) and tri(dibenzylideneacetone)dipalladium chloroform complex (0.54 g, 0.52 mmol) were added and the reaction mixture was stirred under microwave irradiation for 60 minutes at 150° C. The reaction mixture was then evaporated and purified by flash chromatography on silica gel (heptane/ethyl acetate 1:2->0:100 gradient). The desired product was obtained as a brown solid (260 mg, 22percent), MS: m/e=231.1 (M+H+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 16298-03-6, its application will become more common.

Reference:
Patent; Jaeschke, Georg; Kolczewski, Sabine; Porter, Richard Hugh Philip; Vieira, Eric; US2006/199828; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 16298-03-6

Hydrazine hydrate (34 mL, 1.1 mol) was added portionwise to a stirred suspension of methyl 3-aminopyrazine-2-carboxylate 37 (21.3 g, 139 mmol) in ethanol (65 mL) at room temperature. The resulting slurry was stirred at 60 °C for 2 h, cooled to room temperature, and filtered. The solid was washed with cold ethanol (2 x 25 mL) and dried to a constant weight to afford 3-aminopyrazine-2-carbohydrazide (20.75 g, 97percent) as a beige solid. TBTU (5.77 g, 18.0 mmol) was added portionwise over 15 min to a stirred suspension of DIPEA (8.5 mL, 49 mmol), 1-methylcyclopropanecarboxylic acid (1.63 g, 16.3 mmol) and 3-aminopyrazine-2-carbohydrazide (2.50 g, 16.3 mmol) in acetonitrile (40 mL). The mixture was stirred at 80 °C for 20 min, and then cooled to 0 °C. DIPEA (8.5 mL, 49 mmol) followed by 4-methylbenzene-1-sulfonylchloride (9.34 g, 49 mmol) were added over a period of 15 min. The reaction mixture was brought to reflux and allowed to stir at room temperature for 14 h. The mixture was concentrated, and the residue was diluted with DCM, washed with water and brine, dried over magnesium sulfate and concentrated. The crude product was purified by flash chromatography on silica gel eluting with 0 to 40percent ethyl acetate in dichloromethane. After evaporation of the solvent, the resulting solid was triturated with diethyl ether, filtered, washed with the minimum of diethyl ether and dried to afford 3-(5-(1-methylcyclopropyl)-1,3,4-oxadiazol-2-yl)pyrazin-2-amine (2.12 g, 60percent). NBS (1.87 g, 10.5 mmol) was added portionwise to a solution of 3-(5-(1-methylcyclopropyl)-1,3,4-oxadiazol-2-yl)pyrazin-2-amine (2.08 g, 9.6 mmol) in THF (30 mL). The reaction mixture was stirred at room temperature for 16 h and concentrated. The residue was dissolved in dichloromethane (150 mL), washed with water (2 x 40 mL), brine, dried over magnesium sulfate and concentrated. After evaporation of the solvents, the crude product was purified by flash chromatography on silica gel eluting with 0 to 10percent ethyl acetate in dichloromethane. The solvent was evaporated to dryness to afford 5-bromo-3-(5-(1-methylcyclopropyl)-1,3,4-oxadiazol-2-yl)pyrazin-2-amine (2.50 g, 88percent) as a yellow solid. Bis(triphenylphosphine)palladium(II) chloride (59 mg, 0.08 mmol) was added in one portion to a stirred solution of 5-bromo-3-(5-(1-methylcyclopropyl)-1,3,4-oxadiazol-2-yl)pyrazin-2-amine (500 mg, 1.69 mmol) and hexamethyldistannane (0.49 mL, 2.4 mmol) dissolved in dioxane (8 mL) under argon. The resulting suspension was stirred at 80 °C for 1 h. The mixture was evaporated. The crude product was purified by flash chromatography on silica gel eluting with 10 to 30percent ethyl acetate in dichloromethane. The solvent was evaporated to dryness to afford 3-(5-(1-methylcyclopropyl)-1,3,4-oxadiazol-2-yl)-5-(trimethylstannyl)pyrazin-2-amine 38a (314 mg, 49percent) as a yellow crystalline solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 16298-03-6.

Reference:
Article; Barlaam, Bernard; Cosulich, Sabina; Delouvrie, Benedicte; Ellston, Rebecca; Fitzek, Martina; Germain, Herve; Green, Stephen; Hancox, Urs; Harris, Craig S.; Hudson, Kevin; Lambert-Van Der Brempt, Christine; Lebraud, Honorine; Magnien, Francoise; Lamorlette, Maryannick; Le Griffon, Antoine; Morgentin, Remy; Ouvry, Gilles; Page, Ken; Pasquet, Georges; Polanska, Urszula; Ruston, Linette; Saleh, Twana; Vautier, Michel; Ward, Lara; Bioorganic and Medicinal Chemistry Letters; vol. 25; 22; (2015); p. 5155 – 5162;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 16298-03-6,Some common heterocyclic compound, 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate, molecular formula is C6H7N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Methyl 2-amino-3-pyrazine carboxylate (2. 2 g) was dissolved in dry DCM (20 ml) to give a cloudy pale yellow solution, and pyridine (2 ml) in dry DCM (12 ml) was added. The stirred suspension was cooled in an ice bath, and 2,4, 6-trifluorophenylacetyl chloride (3.0 g) in dry DCM (13 ml) was added dropwise. The reaction gradually became a deep orange, and then went clear. It was stirred for 6 hours and stood overnight. The reaction mixture was washed with water, brine, and then dilute hydrochloric acid, and the DCM layer was dried over magnesium sulphate. The solvent was evaporated to yield an orange solid which was triturated with ether, to give methyl 2- [2, 4, 6-TRIFLUOROPHENYLACETYLAMINO]-3-PYRAZINE carboxylate as a yellow solid (1.5 g). LH NM : R (CDC13) 8 ppm: 4.03 (s, 5H), 6.74 (t, 2H), 8.43 (d, LH), 8.61 (d, LH) 10.9 (s, LH).

The synthetic route of 16298-03-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SYNGENTA LIMITED; SYNGENTA PARTICIPATIONS AG; WO2004/56825; (2004); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 16298-03-6, These common heterocyclic compound, 16298-03-6, name is Methyl 2-aminopyrazine-3-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Used for N-benzyl derivatives 1-8. The starting 3-aminopyrazine-2-carboxylic acid(Sigma-Aldrich, Schnelldorf, Germany; 2.2 g; 15.8 mmol) in methanol (250 mL) was cooled downto 0 C and concentrated H2SO4 (3.2 mL) was added. The reaction mixture was stirred for 48 h atrt. Subsequently the reaction mixture was poured into water (27 mL) and alkalized by NaHCO3(approx. 6.3 g) to pH = 7. The precipitate was filtered off and collected as white-brown solid toobtain methyl 3-aminopryzine-2-carboxylate [32]. Methyl 3-aminopyrazine-2-carboxylate (100 mg;0.65 mmol) in methanol (2 mL) along with substituted benzylamine (1.95 mmol; 3 equiv) and NH4Cl(10 mg; 0.19 mmol; 0.1 equiv) [33] were put into reaction tube used for microwave assisted synthesiswith a magnetic stirrer. Reaction was performed in a CEM Discover microwave reactor with a focusedfield in pressurized vials with the following settings: 130 C, 90 W and 40 min. The progress of thereaction was checked using TLC (Merck Silica 60 F254) developed by in hexane/ethyl-acetate 2:1 system.The reaction mixture was adsorbed to silica gel and purified by flash chromatography (Teledyne IscoInc.,) using silica (irregular, 40-63 m) as a stationary phase and gradient elution EtOAc in hexane0-100%, with respect to the expected lipophilicity of the product.

Statistics shows that Methyl 2-aminopyrazine-3-carboxylate is playing an increasingly important role. we look forward to future research findings about 16298-03-6.

Reference:
Article; Bouz, Ghada; Semelkova, Lucia; Jand?ourek, Ond?ej; Kone?na, Klara; Paterova, Pavla; Navratilova, Lucie; Kubi?ek, Vladimir; Kune?, Ji?i; Dole?al, Martin; Zitko, Jan; Molecules; vol. 24; 7; (2019);,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem