Category: 14508-49-7

Related Products of 14508-49-7, The chemical industry reduces the impact on the environment during synthesis 14508-49-7, name is 2-Chloropyrazine, I believe this compound will play a more active role in future production and life.

The reaction was run under nitrogen atmosphere. 2-chloropyrazine (96 mL, 1073 mmol) was added dropwise to 35 wt aqueous hydrazine (544 mL, 6009 mmol) at 65 C over 1 h. After the addition, stirring was continued at 63-67 C for 16 h then let stand at room temperature for two days. The mixture was filtered to remove a small amount of precipitate, then extracted with 10% iPrOH/dichloromethane (5 x 250 mL). The combined organic extracts were dried (MgS04), filtered, then concentrated under reduced pressure. The resulting solid was triturated with isopropyl acetate (600 mL). The solid was collected by filtration, rinsed with isopropyl acetate and dried under vacuum to give 2-hydrazinylpyrazine (60 g, 51 %) as a pale yellow solid. LCMS m/z = 111.2 [M+H]+. lU NMR (400 MHz, DMSO-i ) delta 4.21 (s, 2H), 7.70 (d, = 2.8 Hz, 1H), 7.89 (s, 1H), 7.93 (dd, = 2.8, 1.5 Hz, 1H), 8.10 (d, = 1.5 Hz, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloropyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARENA PHARMACEUTICALS, INC.; BLACKBURN, Anthony C.; HAN, Sangdon; JONES, Robert M.; MONTALBAN, Anthony Garrido; PAL, Biman B.; RUETER, Jaimie Karyn; WO2012/116276; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 14508-49-7,Some common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, molecular formula is C4H3ClN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a Schlenk tube, a mixture of the required amount of catalyst, plus the aryl chloride (1.0 mmol), aryl boronic acid (1.5 mmol) and the selected base (2.0 mmol) in water was evacuated and charged with nitrogen. The reaction mixture was heated at 100C for 12 h. After cooling, the mixture was extracted with CH2Cl2 and the extract was evaporated. The resulting residue was purified by flash chromatography on silica gel using a mixture of CH2Cl2/ethyl acetate (5/1) as eluent. The known products 5, 6a [17,18], 6b [22], 6c [23], 6e [24], 6g [19], 6h [25] and 7a [26] were characterized by comparison of data with those in the literature. The products 6d, 6f and 7b-h were new compounds and characterized by elemental analysis, MS, 1H and 13C NMR.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chloropyrazine, its application will become more common.

Reference:
Article; Han, Xin; Li, Hong-Mei; Xu, Chen; Xiao, Zhi-Qiang; Wang, Zhi-Qiang; Fu, Wei-Jun; Hao, Xin-Qi; Song, Mao-Ping; Transition Metal Chemistry; vol. 41; 4; (2016); p. 403 – 411;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 14508-49-7, name is 2-Chloropyrazine, A new synthetic method of this compound is introduced below., Recommanded Product: 2-Chloropyrazine

Step A Ethanol (13 ml) and 1.0M Na2CO3 (27.5 ml) were added to a suspension of 2-chloropyrazine (4.0 g, 34.6 mmole), 4-formylphenylboronic acid (6.8 g, 45.0 mmole), and tetrakis(triphenylphosphine)palladium(0) (2.0 g, 1.7 mmole) in toluene (55 ml). The mixture was refluxed for 18 hours then cooled, diluted with EtOAc, washed with NaHCO3, washed with brine, dried (MgSO4) and concentrated. Purification by chromatography (SiO2, 4:1 hexanes/EtOAc) yielded 6.2 g (97%) of 4-(2-pyrazinyl)benzaldehyde.

The synthetic route of 14508-49-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zhu, Bin; Marinelli, Brett; Macielag, Mark J.; US2005/250713; (2005); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 14508-49-7, name is 2-Chloropyrazine, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C4H3ClN2

A mixture of chloropyrazine 3 (5.0 mmol) and HNR1R2 (10.0 mmol) was heated at 100 C. in a sealed tube for 15 h. The reaction mixture was cooled to room temperature, diluted with methylene chloride (50 mL), washed with saturated sodium bicarbonate solution (10 mL), dried over sodium sulfate and concentrated to provide the product 4, which could be purified by column chromatography, but was usually used in the next step without purification.; Prepared from 2-chloropyrazine and diethanolamine according to general procedure 2 providing the aminopyrazine (700 mg, quant.) as an oil; 1H NMR (300 MHz, CDCl3) delta 7.80-7.99 (dd, J=2.7, 1.5 Hz, 1H), 7.90-7.89 (d, J=1.5 Hz, 1H), 7.79-7.80 (d, J=2.8 Hz, 1H), 4.78 (br s, 1H), 2.80-2.79 (d, J=4.9 Hz, 3H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 14508-49-7.

Reference:
Patent; Alcon, Inc.; US2006/142307; (2006); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Reference of 14508-49-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 14508-49-7, name is 2-Chloropyrazine belongs to Pyrazines compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 2-chloropyrazine (4.00 g) andhydrazine hydrate was heated at 1 10 C for 1 h, and then cooled to room temperature. The mixture was filtered to give the title compound as a solid (2.30 g, 60.00 %). The compound was characterized by the following spectroscopic data: MS (ESI, pos. ion) m/z: 1 1 1.0 (M+ l).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloropyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Jiancun; ZHANG, Yingjun; ZHANG, Weihong; LIU, Bing; ZHANG, Jiquan; LIU, Jinlei; ZHANG, Lu; WO2013/71697; (2013); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 14508-49-7, name is 2-Chloropyrazine, belongs to Pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14508-49-7, COA of Formula: C4H3ClN2

[Referential Example 2] 2-Hydrazinopyrazine [Show Image] Hydrazine monohydrate (21.80 g) was added to 2-chloropyrazine (10.44 g) in ethanol (65 mL) at room temperature, and the resultant mixture was refluxed for 17 hours, followed by cooling in air. The reaction solvent was evaporated under reduced pressure, and then benzene was added to the residue. The resultant mixture was subjected to decantation, to thereby remove an insoluble matter. The benzene was evaporated under reduced pressure. Hexane was added to the resultant solid, and the mixture was subjected to filtration, to thereby give the title compound (4.67 g, 47%). 1H-NMR(400MHz,CDCl3)delta:7.89(1H,d,J=2.7Hz), 7.99-8.05(1H,m), 8.20(1H,d,J=1.5Hz). ESI-MS m/z:111(M+H)+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; DAIICHI PHARMACEUTICAL CO., LTD.; EP1762568; (2007); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

14508-49-7, name is 2-Chloropyrazine, belongs to Pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 14508-49-7

[0410] Step A: [0411] 1M aq. Na2CO3 (20 mL) and ethanol (10 mL) were added to a solution of 2-chloropyrazine (2.30 g, 20.06 mmol), 4-formylphenylboronic acid (3.90 g, 26.01 mmol) and [1,4-bis(diphenylphosphino)butane]palladium(II) dichloride (0.60 g, 0.99 mmol) in toluene (40 mL) and the mixture was heated to reflux for 18 h. The cooled reaction mixture was diluted with ethyl acetate, washed with sat. aq. NaHCO3 and brine, dried (MgSO4), and concentrated. Purification by chromatography (SiO2, 4:1 hexane/ethyl acetate) yielded 1.56 g (42%) of 4-pyrazinylbenzaldehyde.

The synthetic route of 14508-49-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Henninger, Todd C.; Macielag, Mark J.; Marinelli, Brett A.; Zhu, Bin; US2004/18994; (2004); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 14508-49-7,Some common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, molecular formula is C4H3ClN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A 10 mL round-bottom flask was charged with the prescribedamount of catalyst Pd/Cu, aryl chlorides (0.5 mmol), phenylboronicacids containing hydroxymethyl (0.75 mmol), Cs2CO3 (1.0 mmol)and dioxane (5 mL) in air. The reaction mixture was then placedin an oil bath and heated at 110 C for 24 h. After removal of thesolvent, the resulting residue was purified by flash chromatographyon silica gel using CH2Cl2 as eluent. The products 4a-k, and4m are known compounds [6,9] except for 4l and 4n.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chloropyrazine, its application will become more common.

Reference:
Article; Xu, Chen; Li, Hong-Mei; Wang, Zhi-Qiang; Fu, Wei-Jun; Inorganica Chimica Acta; PA; (2014); p. 11 – 15;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 14508-49-7, name is 2-Chloropyrazine, A new synthetic method of this compound is introduced below., COA of Formula: C4H3ClN2

2-Chloropyrazine (7.79 mL, 87 mmol, commercially available e.g. from Sigma- Aldrich or Haiso PharmChem) was dissolved in ethanol (50 mL), and hydrazine hydrate (6.85 mL, 218 mmol) was added. The solution was refluxed for 6 hours. The mixture was cooled to room temperature and the solvent was partially evaporated. The residue was diluted with water and extracted with 10% (v/v) of 2-propanol/Dichloromethane solution (5 extractions). The combined organic phases were then dried and evaporated to give a yellow solid which was triturated with diethyl ether to give 2-hydrazinopyrazine as a yellow solid (3.32 g).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; GLAXO GROUP LIMITED; DEAN, David Kenneth; MUNOZ-MURIEDAS, Jorge; SIME, Mairi; STEADMAN, Jon Graham Anthony; THEWLIS, Rachel Elizabeth Anne; TRANI, Giancarlo; WALTER, Daryl Simon; WO2010/125102; (2010); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 14508-49-7 as follows. COA of Formula: C4H3ClN2

An oven dried resealable Schlenk tube was charged with 2′-(4-methylpiperazin-1-yl)-2,4′-bipyridin-6-amine (example 34a, 0.09 g, 0.33 mmol), 2-Chloropyrazine (0.04 muL, 0.39 mmol), sodium tert-butoxide (0.04 g, 0.38 mmol) and dioxane (1 mL). The Schlenk tube was subjected to three cycles of evacuation-backfilling with argon, and tris(dibenzylideneacetone)dipalladium(0) (0.01 g, catalytic amount) and 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (0.01 g, catalytic amount) were added. After three further cycles of evacuation-backfilling with argon, the Schlenk tube was capped and placed in an oil bath at 95 C. After 16h, the mixture was cooled and the solvent was removed in vacuo. The residue was purified by flash chromatography to give the title compound (0.09 g, 82%) as a solid.LRMS (m/z): 348 (M+1)+.1 H NMR (500 MHz, CHLOROFORM-d) delta ppm 2.35 (s, 3 H) 2.53 – 2.55 (m, 4 H) 3.63 – 3.66 (m, 4 H) 7.16 (dd, J=6.50, 2 Hz, 1 H) 7.34 (s, 1 H) 7.39 (d, J=9.00 Hz, 1 H) 7.61 (d, J=10.00 Hz, 1 H) 7.73 (t, J=10.00 Hz, 1 H) 7.96 (br. s., 1 H) 8.13 (d, J=3.50 Hz, 1 H) 8.19 – 8.21 (m, 1 H) 8.13 (d, J=3.50 Hz, 1 H) 8.98 (d, J=2.00 Hz, 1 H)

According to the analysis of related databases, 14508-49-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Almirall, S.A.; Vidal Juan, Bernat; Forns Berenguel, Maria Pilar; Castillo Mcquade, Marcos; Erra Sola, Montserrat; Mir Cepeda, Marta; EP2441755; (2012); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem