Category: 14508-49-7

These common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2-Chloropyrazine

Step 1: tert-Butyl 4-(pyrazin-2-yl)piperazine-1-carboxylate Into a 1 L flask equipped with a condenser and a magnetic stir bar was added 2-chloropyrazine (20.6 g, 180 mmol), tert-butyl piperazine-1-carboxylate (33.5 g, 180 mmol), potassium carbonate (29.8 g, 216 mmol), dioxane (225 mL) and DMF (225 mL). The mixture was heated to 120 C. for 3 days. The mixture was cooled and poured into a 1 L separatory funnel containing brine (600 mL) and extracted with Et2O (3*200 mL). The combined organic layers were washed with brine, dried over MgSO4, filtered and concentrated under reduced pressure. Purification by column chromatography through silica gel, eluting with 50:50 hexanes:EtOAc to 20:80 hexanes:EtOAc as a gradient, afforded the title compound as a yellow solid.

The synthetic route of 2-Chloropyrazine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Isabel, Elise; Lachance, Nicolas; Leclerc, Jean-Philippe; Leger, Serge; Oballa, Renata M.; Powell, David; Ramtohul, Yeeman K.; Roy, Patrick; Tranmer, Geoffrey K.; Aspiotis, Renee; Li, Lianhai; Martins, Evelyn; US2011/301143; (2011); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Application of 14508-49-7,Some common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, molecular formula is C4H3ClN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2-Chloropyrazine (7.79 mL, 87 mmol, commercially available e.g. from Sigma- Aldrich or Haiso PharmChem) was dissolved in ethanol (50 mL), and hydrazine hydrate (6.85 mL, 218 mmol) was added. The solution was refluxed for 6 hours. The mixture was cooled to room temperature and the solvent was partially evaporated. The residue was diluted with water and extracted with 10% (v/v) of 2-propanol/Dichloromethane solution (5 extractions). The combined organic phases were then dried and evaporated to give a yellow solid which was triturated with diethyl ether to give 2-hydrazinopyrazine as a yellow solid (3.32 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Chloropyrazine, its application will become more common.

Reference:
Patent; GLAXO GROUP LIMITED; DEAN, David Kenneth; MUNOZ-MURIEDAS, Jorge; SIME, Mairi; STEADMAN, Jon Graham Anthony; THEWLIS, Rachel Elizabeth Anne; TRANI, Giancarlo; WALTER, Daryl Simon; WO2010/125102; (2010); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 14508-49-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 14508-49-7, name is 2-Chloropyrazine, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: (0.1mole) of 2-halo nitrogen heterocycle and (0.5 mole) of hydrazine hydrate were mixed together in a 250mL round bottom flask equipped with reflux condenser and wereheated at 100oC, progress of the reaction was monitored byTLC. After completion of the reaction the reaction mixture was cooled to (-5-0oC) for 14hr and the precipitated solid was filtered and washed with two 5ml portions of ice coldwater and dried to give the compound 1 in good yield.

The chemical industry reduces the impact on the environment during synthesis 2-Chloropyrazine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Nitlikar, Lakshmikant H.; Darandale, Sunil N.; Shinde, Devanand B.; Letters in Organic Chemistry; vol. 10; 5; (2013); p. 348 – 352;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

14508-49-7, name is 2-Chloropyrazine, belongs to Pyrazines compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 14508-49-7

[Referential Example 2] 2-Hydrazinopyrazine [Show Image] Hydrazine monohydrate (21.80 g) was added to 2-chloropyrazine (10.44 g) in ethanol (65 mL) at room temperature, and the resultant mixture was refluxed for 17 hours, followed by cooling in air. The reaction solvent was evaporated under reduced pressure, and then benzene was added to the residue. The resultant mixture was subjected to decantation, to thereby remove an insoluble matter. The benzene was evaporated under reduced pressure. Hexane was added to the resultant solid, and the mixture was subjected to filtration, to thereby give the title compound (4.67 g, 47%). 1H-NMR(400MHz,CDCl3)delta:7.89(1H,d,J=2.7Hz), 7.99-8.05(1H,m), 8.20(1H,d,J=1.5Hz). ESI-MS m/z:111(M+H)+.

The synthetic route of 14508-49-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DAIICHI PHARMACEUTICAL CO., LTD.; EP1762568; (2007); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 14508-49-7 as follows. Computed Properties of C4H3ClN2

General procedure: Tetrakis(Triphenylphosphine)Palladium(0) (1-3% mol) is added to a mixture of 2- Chloropyrazine (1 eq), Aryl/Heteroaryl boronic acid (1 eq) and base (2 eq) suspended into the solvent. The reaction mixture is heated until the reaction is completed, the solvent isremoved under reduced pressure and the residue is partitioned between water and EtOAc (or iN aqueous NaOH and EtOAc); organic layer is separated, dried, concentrated under reduced pressure and the residue is purified by Silica gel flash chromatography using a suitable eluent.

According to the analysis of related databases, 14508-49-7, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; HOENKE, Christoph; GIOVANNINI, Riccardo; LESSEL, Uta; ROSENBROCK, Holger; SCHMID, Bernhard; WO2015/55698; (2015); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

These common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 14508-49-7

General procedure: A 10 mL round-bottom flask was charged with the prescribedamount of catalyst Pd/Cu, aryl chlorides (0.5 mmol), phenylboronicacids containing hydroxymethyl (0.75 mmol), Cs2CO3 (1.0 mmol)and dioxane (5 mL) in air. The reaction mixture was then placedin an oil bath and heated at 110 C for 24 h. After removal of thesolvent, the resulting residue was purified by flash chromatographyon silica gel using CH2Cl2 as eluent. The products 4a-k, and4m are known compounds [6,9] except for 4l and 4n.

The synthetic route of 2-Chloropyrazine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Xu, Chen; Li, Hong-Mei; Wang, Zhi-Qiang; Fu, Wei-Jun; Inorganica Chimica Acta; vol. 423; 1; (2014); p. 11 – 15;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 14508-49-7, name is 2-Chloropyrazine, belongs to Pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 14508-49-7, COA of Formula: C4H3ClN2

General procedure: A mixture of 2-chloropyrazine (1mmol), 4-ethylphenylboronic acid or 4-methoxy-phenyl boronic acid (1.5mmol), K2CO3 (3mmol), Pd(OAc)2 (0.03mmol), water (2mL) and ethanol (6mL) was stirred at 90C in air for 24h. The reaction mixture was extracted with ethyl acetate, then the combined organic layers were washed with water, dried over MgSO4, filtered, and the solvent was removed on a rotary evaporator. The products were isolated by flash chromatography on silica gel with CH2Cl2 as eluent. The characterization data for 1: Yield: 87%. 1H NMR (400MHz, CDCl3): delta 8.99 (s, 1H), 8.57 (s, 1H), 8.44 (s, 1H), 7.92 (d, J=8.0Hz, 2H), 7.31 (d, J=8.0Hz, 2H), 2.69 (q, J=7.6Hz, 2H), 1.25 (t, J=7.6Hz, 3H). 13C NMR (100MHz, CDCl3): delta 152.8, 146.4, 144.1, 142.6, 142.0, 133.8, 128.6, 126.9, 28.7, 15.4. MS (EI, 70eV) m/z=185.1 (M+H)+. Elemental analysis calcd (%) for C12H12N2: C 78.23, H 6.57, N 15.21. Found: C 78.46, H 6.31, N 15.33. The characterization data for 2, see Supporting Information.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Chloropyrazine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xu, Chen; Wang, Zhi-Qiang; Fu, Wei-Jun; Ji, Bao-Ming; Yuan, Xiao-Er; Han, Xin; Xiao, Zhi-Qiang; Hao, Xin-Qi; Song, Mao-Ping; Journal of Organometallic Chemistry; vol. 777; (2015); p. 1 – 5;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Synthetic Route of 14508-49-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 14508-49-7, name is 2-Chloropyrazine, This compound has unique chemical properties. The synthetic route is as follows.

1)Will be 31.3 grams(80 wt%, 50 mmol)Hydrazine hydrate was added to 100 ml three-necked flask,Heating up to 60 ,Under magnetic stirring, 11.5 g was slowly added dropwise(100 mmol)2-chloropyrazine,The reaction was carried out at a temperature of 60 C for 10 hours,After completion of the reaction, the mixture was cooled to 2 C,Precipitation of solids,filter,Dried to afford 6.63 g of a white solid,Yield 60.5%;

The chemical industry reduces the impact on the environment during synthesis 2-Chloropyrazine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Nankai University; Wang, Baolei; Li, Zhengming; Zhang, Yan; (13 pag.)CN106749262; (2017); A;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Electric Literature of 14508-49-7, These common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of 2-chloropyrazine (1mmol), 4-ethylphenylboronic acid or 4-methoxy-phenyl boronic acid (1.5mmol), K2CO3 (3mmol), Pd(OAc)2 (0.03mmol), water (2mL) and ethanol (6mL) was stirred at 90C in air for 24h. The reaction mixture was extracted with ethyl acetate, then the combined organic layers were washed with water, dried over MgSO4, filtered, and the solvent was removed on a rotary evaporator. The products were isolated by flash chromatography on silica gel with CH2Cl2 as eluent. The characterization data for 1: Yield: 87%.

Statistics shows that 2-Chloropyrazine is playing an increasingly important role. we look forward to future research findings about 14508-49-7.

Reference:
Short Survey; Xu, Chen; Wang, Zhi-Qiang; Yuan, Xiao-Er; Han, Xin; Xiao, Zhi-Qiang; Fu, Wei-Jun; Ji, Bao-Ming; Hao, Xin-Qi; Song, Mao-Ping; Journal of Organometallic Chemistry; vol. 777; (2015); p. 1 – 5;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 14508-49-7, name is 2-Chloropyrazine, A new synthetic method of this compound is introduced below., Computed Properties of C4H3ClN2

Preparation of compound 46: To a solution of 2-chloropyrazine (500 mg, 0.0027 moles, 1 eq) in DMF (20 ml) was added cesium carbonate (1.7 g, 0.0052 moles, 2 eq) followed by N-Boc-piperazine (506.8 mg, 0.0027 moles, 1.0 eq). The reaction mixture was heated at 100 C. for 12 hrs and monitored by TLC. Upon completion, the excess solvent was removed under reduced pressure and the crude material was diluted with water and extracted with ethyl acetate. The organic layer was dried over sodium sulfate and concentrated. The crude material was washed, purified on silica gel (60-120 mesh) using 30% ethylacetate-hexane to provide 400 mg of compound 46 (44.1% yield).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Salituro, Francesco G.; Saunders, Jeffrey O.; Yan, Shunqi; US2010/331307; (2010); A1;,
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem