Month: April 2022

Most of the natural products isolated at present are heterocyclic compounds, so heterocyclic compounds occupy an important position in the research of organic chemistry. A compound: 591-54-8, is researched, SMILESS is C1=CN=CN=C1N, Molecular C4H5N3Journal, Article, Journal of Organic Chemistry called Reductive Amination Revisited: Reduction of Aldimines with Trichlorosilane Catalyzed by Dimethylformamide – Functional Groups Tolerance, Scope, and Limitations, Author is Popov, Kirill K.; Campbell, Joanna L. P.; Kysilka, Ondrej; Hosek, Jan; Davies, Christopher D.; Pour, Milan; Kocovsky, Pavel, the main research direction is aldimine preparation green chem; aldehyde amine preparation reductive amination DMF catalyst.Application of 591-54-8.

Aldimines R1CH2NHR2 (R1 = but-3-yn-1-yl, Ph, thiophen-2-yl, etc.; R2 = Bu, Bn, cyclohexyl, 5-methyl-1,3,4-thiadiazol-2-yl, etc.), generated in situ from aliphatic, aromatic, and heteroaromatic aldehydes R1CHO and aliphatic, aromatic, and heteroaromatic primary or secondary amines R2NH2, can be reduced with trichlorosilane in the presence of DMF (DMF) as an organocatalyst (≤10 mol%) in toluene or CH2Cl2 at room temperature The reduction tolerates ketone carbonyls, esters, amides, nitriles, sulfones, sulfonamides, NO2, SF5, and CF3 groups, boronic esters, azides, phosphine oxides, C=C and CC bonds, and ferrocenyl nucleus but sulfoxides and N-oxides are reduced. α,β-Unsaturated aldimines undergo 1,2-reduction only, leaving the C=C bond intact. N-Monoalkylation of primary amines is attained with a 1:1 aldehyde to amine ratio, whereas excess of the aldehyde (≥2:1) allows second alkylation, giving rise to tertiary amines. Reductive N-alkylation of α-amino acids proceeds without racemization; the resulting products, containing a CC bond or N3 group, are suitable for click chem. This reaction thus offers advantages over the traditional methods (borohydride reduction or catalytic hydrogenation) in terms of efficiency and chemoselectivity. Solubility of some of the reacting partners appears to be the only limitation. The byproducts generated by the workup with aqueous NaHCO3 (i.e., NaCl and silica) are environmentally benign. As a greener alternative, DMA can be employed as a catalyst instead of DMF.

Here is just a brief introduction to this compound(591-54-8)Application of 591-54-8, more information about the compound(4-Aminopyrimidine) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Recommanded Product: 2-Amino-4,5-dihydrothiazole-4-carboxylic acid. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 2-Amino-4,5-dihydrothiazole-4-carboxylic acid, is researched, Molecular C4H6N2O2S, CAS is 2150-55-2, about RECiQ: A Rapid and Easy Method for Determining Cyanide Intoxication by Cyanide and 2-Aminothiazoline-4-carboxylic Acid Quantification in the Human Blood Using Probe Electrospray Ionization Tandem Mass Spectrometry. Author is Hisatsune, Kazuaki; Murata, Tasuku; Ogata, Koretsugu; Hida, Minemasa; Ishii, Akira; Tsuchihashi, Hitoshi; Hayashi, Yumi; Zaitsu, Kei.

In this study, we developed a rapid and easy method to determine cyanide (CN) intoxication by quantification of CN and 2-aminothiazoline-4-carboxylic acid (ATCA), which is a new and reliable indicator of CN exposure, in the human blood using probe electrospray ionization tandem mass spectrometry (PESI/MS/MS) named RECiQ. For CN, we applied the previously reported one-pot derivatization method using 2,3-naphthalene-dialdehyde and taurine, which can directly derivatize CN in the blood. The anal. conditions of the CN derivatization were optimized as a 10 min reaction time at room temperature In contrast, ATCA could be directly detected in the blood by PESI/MS/MS. We developed quant. methods for the derivatized CN and ATCA using an internal standard method and validated them using quality control samples, demonstrating that the linearities of each calibration curve were greater than 0.995, and intra- and interday precisions and accuracies were 5.1-15 and 1.1-14%, resp. Moreover, the lower limit of detections for CN and ATCA were 42 and 43 ng/mL, resp. Finally, we applied RECiQ to three postmortem blood specimens obtained from victims of fire incidents, which resulted in the successful quantification of CN and ATCA in all samples. As PESI/MS/MS can be completed within 0.5 min, and the sample volume requirement of RECiQ is only 2μL of blood, these methods are useful not only for the rapid determination of CN exposure but also for the estimation of the CN intoxication levels during an autopsy.

Here is just a brief introduction to this compound(2150-55-2)Recommanded Product: 2-Amino-4,5-dihydrothiazole-4-carboxylic acid, more information about the compound(2-Amino-4,5-dihydrothiazole-4-carboxylic acid) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 1827-27-6, is researched, Molecular C5H5FN2, about Asymmetric synthesis of heterocyclic chloroamines and aziridines by enantioselective protonation of catalytically generated enamines, the main research direction is heterocyclic chloroamine enantioselective synthesis protonation chloroenamine; aziridine enantioselective synthesis catalyst.Name: 5-Amino-2-fluoropyridine.

We report a method for the synthesis of chiral vicinal chloroamines via asym. protonation of catalytically generated prochiral chloroenamines using chiral Bronsted acids. The process is highly enantioselective, with the origin of asymmetry and catalyst substituent effects elucidated by DFT calculations We show the utility of the method as an approach to the synthesis of a broad range of heterocycle-substituted aziridines by treatment of the chloroamines with base in a one-pot process, as well as the utility of the process to allow access to vicinal diamines.

Here is just a brief introduction to this compound(1827-27-6)Name: 5-Amino-2-fluoropyridine, more information about the compound(5-Amino-2-fluoropyridine) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Related Products of 2150-55-2. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: 2-Amino-4,5-dihydrothiazole-4-carboxylic acid, is researched, Molecular C4H6N2O2S, CAS is 2150-55-2, about Microbial conversion mechanism of D,L-2-amino-Δ2-thiazoline-4-carboxylic acid to L-cysteine in Pseudomonas species and its application.

A review. L-Cysteine which is widely used in food additives, nutritional infusions, and cosmetics and medicines has mainly been produced from hydrolyzates of hair by acid or alkali. As an alternative to this traditional method, a new microbial conversion method for L-cysteine production from a chem. synthesized precursor, D,L-2-amino-Δ2-thiazoline-4-carboxylic acid (D,L-ATC), using Pseudomonas species was developed. From the studies on the microbial conversion process of D,L-ATC to L-cysteine in several Pseudomonas strains by several groups, it was found that there are two pathways via S-carbamoyl-L-cysteine (L-SCC, pathway 1) and via N-carbamoyl-L-cysteine (L-NCC, pathway 2) in the microbial conversion process. We isolated and identified the genes for ATC hydrolase and NCC amidohydrolase, which are involved in pathway 2 in Pseudomonas sp. ON-4a. The ATC hydrolase and NCC amidohydrolase expressed in Escherichia coli were purified and characterized. In this study, we clarified the mol. basis of the microbial conversion of D,L-ATC to L-cysteine. We propose that L-cysteine production from D,L-ATC can be effectively carried out by two continuous reactions using recombinant ATC hydrolase and NCC amidohydrolase.

Here is just a brief introduction to this compound(2150-55-2)Related Products of 2150-55-2, more information about the compound(2-Amino-4,5-dihydrothiazole-4-carboxylic acid) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: 4-Aminopyrimidine, is researched, Molecular C4H5N3, CAS is 591-54-8, about Structure-Guided Discovery of Silicon-Containing Subnanomolar Inhibitor of Hydroxyphenylpyruvate Dioxygenase as a Potential Herbicide, the main research direction is triketonequinazolinedione preparation hydroxyphenylpyruvate dioxygenase inhibitor herbicide; crop safety weed control wheat peanut MBQ derivative; 4-dione; herbicide; hydrophobic interaction; hydroxyphenylpyruvate dioxygenase; lead optimization; quinazoline-2.SDS of cas: 591-54-8.

4-Hydroxyphenylpyruvate dioxygenase (HPPD, EC 1.13.11.27) has been recognized as one of the most promising targets in the field of herbicide innovation considering the severity of weed resistance currently. In a persistent effort to develop effective HPPD-inhibiting herbicides, a structure-guided strategy was carried out to perform the structural optimization for triketone-quinazoline-2,4-diones, a novel HPPD inhibitor scaffold first discovered in our laboratory Herein, starting from the crystal structure of Arabidopsis thaliana (At)HPPD complexed with 6-(2-hydroxy-6-oxocyclohex-1-ene-1-carbonyl)-1,5-dimethyl-3-(o-tolyl)quinazoline-2,4(1H,3H)-dione (MBQ), three subseries of quinazoline-2,4-dione derivatives were designed and prepared by optimizing the hydrophobic interactions between the side chain of the core structure at the R1 position and the hydrophobic pocket at the active site entrance of AtHPPD. 6-(2-Hydroxy-6-oxocyclohex-1-ene-1-carbonyl)-1,5-dimethyl-3-(3-(trimethylsilyl)prop-2-yn-1-yl)quinazoline-2,4(1H,3H)-dione (I) with the best inhibitory activity against AtHPPD was identified to be the first subnanomolar-range AtHPPD inhibitor (Ki = 0.86 nM), which significantly outperformed that of the lead compound MBQ (Ki = 8.2 nM). Further determination of the crystal structure of AtHPPD in complex with compound 60 (1.85 Å) and the binding energy calculation provided a mol. basis for the understanding of its high efficiency. Addnl., the greenhouse assay indicated that 6-(2-hydroxy-6-oxocyclohex-1-ene-1-carbonyl)-1,5-dimethyl-3-propylquinazoline-2,4(1H,3H)-dione (II) and compound I showed acceptable crop safety against peanut and good herbicidal activity with a broad spectrum. Moreover, compound II also showed superior selectivity for wheat at the dosage of 120 g ai/ha and favorable herbicidal efficacy toward the gramineous weeds at the dosage of as low as 30 g ai/ha. We believe that compounds II and I have promising prospects as new herbicide candidates for wheat and peanut fields.

Here is just a brief introduction to this compound(591-54-8)SDS of cas: 591-54-8, more information about the compound(4-Aminopyrimidine) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Quality Control of Ethyl oxazole-5-carboxylate. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: Ethyl oxazole-5-carboxylate, is researched, Molecular C6H7NO3, CAS is 118994-89-1, about Selective Inhibition of Collagen Prolyl 4-Hydroxylase in Human Cells. Author is Vasta, James D.; Andersen, Kristen A.; Deck, Kathryn M.; Nizzi, Christopher P.; Eisenstein, Richard S.; Raines, Ronald T..

Collagen is the most abundant protein in animals. Its overproduction is associated with fibrosis and cancer metastasis. The stability of collagen relies on posttranslational modifications, the most prevalent being the hydroxylation of collagen strands by collagen prolyl 4-hydroxylases (CP4Hs). Catalysis by CP4Hs enlists an iron cofactor to convert proline residues to 4-hydroxyproline residues, which are essential for the conformational stability of mature collagen. Et 3,4-dihydroxybenzoate (EDHB) is commonly used as a “”P4H”” inhibitor in cells, but suffers from low potency, poor selectivity, and off-target effects that cause iron deficiency. Dicarboxylates of 2,2′-bipyridine are among the most potent known CP4H inhibitors but suffer from a high affinity for free iron. A screen of biheteroaryl compounds revealed that replacing one pyridyl group with a thiazole moiety retains potency and enhances selectivity. A diester of 2-(5-carboxythiazol-2-yl)pyridine-5-carboxylic acid is bioavailable to human cells and inhibits collagen biosynthesis at concentrations that neither cause general toxicity nor disrupt iron homeostasis. These data anoint a potent and selective probe for CP4H and a potential lead for the development of a new class of antifibrotic and antimetastatic agents.

Here is just a brief introduction to this compound(118994-89-1)Quality Control of Ethyl oxazole-5-carboxylate, more information about the compound(Ethyl oxazole-5-carboxylate) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Computed Properties of C4H6N2O2S. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 2-Amino-4,5-dihydrothiazole-4-carboxylic acid, is researched, Molecular C4H6N2O2S, CAS is 2150-55-2, about RECiQ: A Rapid and Easy Method for Determining Cyanide Intoxication by Cyanide and 2-Aminothiazoline-4-carboxylic Acid Quantification in the Human Blood Using Probe Electrospray Ionization Tandem Mass Spectrometry. Author is Hisatsune, Kazuaki; Murata, Tasuku; Ogata, Koretsugu; Hida, Minemasa; Ishii, Akira; Tsuchihashi, Hitoshi; Hayashi, Yumi; Zaitsu, Kei.

In this study, we developed a rapid and easy method to determine cyanide (CN) intoxication by quantification of CN and 2-aminothiazoline-4-carboxylic acid (ATCA), which is a new and reliable indicator of CN exposure, in the human blood using probe electrospray ionization tandem mass spectrometry (PESI/MS/MS) named RECiQ. For CN, we applied the previously reported one-pot derivatization method using 2,3-naphthalene-dialdehyde and taurine, which can directly derivatize CN in the blood. The anal. conditions of the CN derivatization were optimized as a 10 min reaction time at room temperature In contrast, ATCA could be directly detected in the blood by PESI/MS/MS. We developed quant. methods for the derivatized CN and ATCA using an internal standard method and validated them using quality control samples, demonstrating that the linearities of each calibration curve were greater than 0.995, and intra- and interday precisions and accuracies were 5.1-15 and 1.1-14%, resp. Moreover, the lower limit of detections for CN and ATCA were 42 and 43 ng/mL, resp. Finally, we applied RECiQ to three postmortem blood specimens obtained from victims of fire incidents, which resulted in the successful quantification of CN and ATCA in all samples. As PESI/MS/MS can be completed within 0.5 min, and the sample volume requirement of RECiQ is only 2μL of blood, these methods are useful not only for the rapid determination of CN exposure but also for the estimation of the CN intoxication levels during an autopsy.

Here is just a brief introduction to this compound(2150-55-2)Computed Properties of C4H6N2O2S, more information about the compound(2-Amino-4,5-dihydrothiazole-4-carboxylic acid) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Energy (Oxford, United Kingdom) called Study on hydrothermal liquefaction of spirulina platensis using biochar based catalysts to produce bio-oil, Author is Wang, Bin; He, Zhixia; Zhang, Bo; Duan, Yibing, which mentions a compound: 591-54-8, SMILESS is C1=CN=CN=C1N, Molecular C4H5N3, Safety of 4-Aminopyrimidine.

Hydrothermal liquefaction (HTL) is an effective conversion technol. of microalgae biomass. In this study, the low-lipid microalgae-spirulina platensis was used as feedstock to investigate the performance of the biochar-based catalysts on HTL. The byproduct of spirulina platensis HTL-solid residue was collected and activated to obtain the biochar (BC). Then, the BC was used as the carrier to support Co, Ni and their oxides CoOx and NiO to form Co/BC, Ni/BC, CoOx/BC, NiO/BC catalysts. The Response Surface Methodol. (RSM) was used to optimize the HTL parameters and investigate the effect of biochar-based catalysts on HTL. The results showed that the maximum yield of bio-oil catalyzed by BC was 35.80 wt% with 304 °C, 34.7 min, and 0.32 g catalyst loading. BC catalyst displayed an improvement of bio-oil yield up to 4.00 wt% at low temperatures (260-280 °C). Ni/BC was the most favorable catalyst for bio-oil production, reaching a maximum value of 36.57 wt% at 280 °C, 35.0 min, and 0.15 g catalyst loading, which increased by 6.40 wt% compared with the non catalytic case. The characterization of bio-oil showed that CoOx/BC and NiO/BC could raise the hydrocarbon content, H/C value, and heat value, while decrease O/C value. Ni/BC had an excellent denitrification effect on bio-oil, the N content was reduced by nearly 2.00 wt% compared with the non catalytic case.

Here is just a brief introduction to this compound(591-54-8)Safety of 4-Aminopyrimidine, more information about the compound(4-Aminopyrimidine) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Most of the natural products isolated at present are heterocyclic compounds, so heterocyclic compounds occupy an important position in the research of organic chemistry. A compound: 118994-89-1, is researched, SMILESS is O=C(C1=CN=CO1)OCC, Molecular C6H7NO3Journal, Article, Research Support, Non-U.S. Gov’t, Organic Letters called Highly Enantioselective Mukaiyama Aldol Reactions Catalyzed by a Chiral Oxazaborolidinium Ion: Total Synthesis of (-)-Inthomycin C, Author is Senapati, Bidyut Kumar; Gao, Lizhu; Lee, Sung Il; Hwang, Geum-Sook; Ryu, Do Hyun, the main research direction is enantioselective synthesis beta hydroxy ester Mukaiyama aldol reaction aldehyde; inthomycin c enantioselective synthesis Mukaiyama aldol reaction.Electric Literature of C6H7NO3.

A cationic oxazaborolidinium-catalyzed asym. Mukaiyama aldol reaction of (1-methoxy-2-methyl-propenyloxy)-trimethylsilane with various aldehydes including α,β-disubstituted acroleins has been developed in high yields and enantioselectivities. The synthetic utility of this methodol. was demonstrated in the first short synthesis of naturally occurring inthomycin C (I) in high enantio-purity.

Here is just a brief introduction to this compound(118994-89-1)Electric Literature of C6H7NO3, more information about the compound(Ethyl oxazole-5-carboxylate) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 2-Amino-4,5-dihydrothiazole-4-carboxylic acid, is researched, Molecular C4H6N2O2S, CAS is 2150-55-2, about Bioconversion of D,L-ATC to L-cysteine using whole cells.Computed Properties of C4H6N2O2S.

In the conversion of D,L-2-amino-Δ2-thiazoline-4-carboxylic acid (D,L-ATC) to L-cysteine using Pseudomonas species CU6, the effects of surfactants on whole cells and the stabilities of cell-free enzyme solution and continuous reactor packed with immobilized whole cells were investigated. The enzymic reaction was minimal by whole cells without the addition of surfactants, whereas it was well carried out with SDS or Triton X-100 and was comparable to the reaction using a cell-free enzyme solution The enzyme activity of the cell-free solution decreased 50% after 7 h of storage at 30°, but not under anaerobic conditions with sparging nitrogen gas. On the other hand, there were no effects of nitrogen gas in a continuous reactor using immobilized whole cells. Hydroxylamine, an inhibitor of L-cysteine desulfhydrase, lowered the enzyme stability.

Here is just a brief introduction to this compound(2150-55-2)Computed Properties of C4H6N2O2S, more information about the compound(2-Amino-4,5-dihydrothiazole-4-carboxylic acid) is in the article, you can click the link below.

Reference:
Pyrazine – Wikipedia,
Pyrazine | C4H4N2 – PubChem