Month: May 2021

Application of 110223-15-9,Some common heterocyclic compound, 110223-15-9, name is 2-Amino-3-benzyloxypyrazine, molecular formula is C11H11N3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

3-(benzyloxy)pyridin-2-amine (100 mg, 0.50 mmol) and sodium hydride (60% in mineral oil, 22 mg, 0.55 mmol) was dissolved in tetrahydrofuran (0.25M) and then 1-adamantyl isocyanate (106 mg, 0.6 mmol) was added dropwise and heating at reflux for 20 hours. After the reaction was cooled to room temperature, water was added to terminate the reaction, and extracted with ethyl acetate, drying the extracted solution over sodium sulfate, it was filtered and concentrated under reduced pressure. By separation and purification of the residue by column chromatography (ethyl acetate / n-hexane = 1/2) to give the title compound 50 mg at a yield of 26.6%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Amino-3-benzyloxypyrazine, its application will become more common.

Adding a certain compound to certain chemical reactions, such as: 69214-33-1, name is 8-Chloroimidazo[1,2-a]pyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 69214-33-1, SDS of cas: 69214-33-1

General procedure: The title Compound 30 (12 mg, yield: 19%) was obtained in the same manner as in Example 5 using 4-[2-oxo-3-(piperidin-4-ylmethyl)-3,4-dihydroquinazolin-1(2H)-yl]picolinonitrile dihydrochloride obtained in Step 2 of Example 27 and 8-chloroimidazo[1,2-a]pyrazine. ESI-MS m/z: 465 (M+H)+, 1H-NMR (300 MHz, CDCl3, delta): 8.80-8.78 (m, 1H), 7.84-7.83 (m, 1H), 7.67-7.65 (m, 1H), 7.53 (d, J=1.5 Hz, 1H), 7.48-7.47 (m, 2H), 7.33 (d, J=4.8 Hz, 1H), 7.19-7.07 (m, 3H), 6.40-6.37 (m, 1H), 5.48-5.43 (m, 2H), 4.56 (s, 2H), 3.39 (d, J=6.9 Hz, 2H), 3.10-3.00 (m, 2H), 2.17-2.10 (m, 1H), 1.88-1.85 (m, 2H), 1.52-1.38 (m, 2H) Step 1: 3-{[1-(6,7-Dimethoxyquinazolin-4-yl)piperidin-4-yl]methyl}-3,4-dihydroquinazolin-2(1H)-one (300 mg, 0.69 mmol) obtained by the method described in Chemical & Pharmaceutical Bulletin 1990, 38(6), 1591 was dissolved in DMF (3.0 mL), and sodium hydride (about 60 wt %, 33 mg) and methyl 2-(bromomethyl)-benzoate (190 mg, 0.83 mmol) were sequentially added thereto in an ice bath. After the resulting mixture was stirred at room temperature for 2 hours, a saturated aqueous sodium bicarbonate solution was added to the reaction mixture, and the resulting mixture was extracted with ethyl acetate. The organic layer was washed with saturated brine, and then dried over anhydrous magnesium sulfate and concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (a chloroform/methanol mixed solvent), whereby methyl 2-[(3-{[1-(6,7-dimethoxyquinazolin-4-yl)piperidin-4-yl]methyl}-2-oxo-3,4-dihydroquinazolin-1(2H)-yl)methyl]benzoate (355 mg, yield: 88%) was obtained. ESI-MS m/z: 582 (M+H)+, 1H-NMR (400 MHz, CDCl3, delta): 8.66 (s, 1H), 8.04 (d, J=7.8 Hz, 1H), 7.41-7.36 (m, 1H), 7.32-7.27 (m, 2H), 7.15-7.06 (m, 4H), 6.99-6.94 (m, 1H), 6.57 (d, J=8.8 Hz, 1H), 5.52 (s, 2H), 4.57 (s, 2H), 4.22-4.15 (br m, 2H), 4.02 (s, 3H), 3.97 (s, 3H), 3.93 (s, 3H), 3.50 (d, J=7.8 Hz, 2H), 3.12-3.02 (m, 2H), 2.18-2.08 (m, 1H), 1.96-1.87 (br m, 2H), 1.66-1.55 (br m, 2H)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 8-Chloroimidazo[1,2-a]pyrazine, and friends who are interested can also refer to it.

Synthetic Route of 54013-06-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 54013-06-8, name is Ethyl 5-aminopyrazine-2-carboxylate belongs to pyrazines compound, it is a common compound, a new synthetic route is introduced below.

Example 5: Ethyl 2-[4-(1-aminocyclobutyl)phenyl]-3-phenylimidazo[1,2- a razine-6-carboxylate To a mixture of crude fert-butyl (1-{4-[bromo(phenyl)acetyl]phenyl}cyclobutyl)- carbamate [lnt-1-A] (245 mg, 0.44 mmol, 1.0 eq) and ethyl 5-aminopyrazine-2- carboxylate (CAS-Nr. 54013-06-8, 81.1 mg, 0.49 mmol, 1.1 eq.) in 2.7 mL bu- tyronitrile was heated at 120 for 1.5h. A substan tial amount of the deprotected free amine was detected by UPLC analysis. For isolation, the volatile components were removed using a rotary evaporator and the resulting crude material was purified via MPLC [Biotage Isolera, 25 g Snap-cartridge; eluent: DCM -> DCM/ethanol (95/5)] to deliver 38 mg (21 %) of the title compound. UPLC-MS (Method 1): RT = 0.90 min; m/z = 414 (M+H)+. 1H-NMR (400 MHz, DMSO-d6): delta [ppm] = 1.26 (t, 3H), 1.60 (m, 1 H), 1.88-2.07 (m, 3H), 2.12 (s br, 2H), 2.26-2.37 (m, 2H), 4.30 (q, 2H), 7.39 (d, 2H), 7.57(d, 4H), 7.60-7.68 (m, 3H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 5-aminopyrazine-2-carboxylate, other downstream synthetic routes, hurry up and to see.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 313339-92-3, name is 3,5-Dichloropyrazine-2-carbonitrile, A new synthetic method of this compound is introduced below., Formula: C5HCl2N3

Example 14 5-((1R,2R)-2-amino-3,3-difluorocyclohexylamino)-3-(quinolin-6-ylamino)pyrazine-2-carboxamide A solution of 3,5-dichloropyrazine-2-carbonitrile (102 mg, 0.586 mmol), (1R,2R)-3,3-difluorocyclohexane-1,2-diamine dihydrochloride (132 mg, 0.591 mmol) and DIEA (0.400 mL, 2.30 mmol) in DMF (2 mL) was stirred at room temperature for 20 h. Water and EtOAc were added. Organic phase was separated, washed with water, dried over Na2SO4, concentrated in vacuo to give 5-((1R,2R)-2-amino-3,3-difluorocyclohexylamino)-3-chloropyrazine-2-carbonitrile (153 mg).

The synthetic route of 313339-92-3 has been constantly updated, and we look forward to future research findings.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 91775-62-1, name is 3-Bromo-8-methoxyimidazo[1,2-a]pyrazine, A new synthetic method of this compound is introduced below., Recommanded Product: 3-Bromo-8-methoxyimidazo[1,2-a]pyrazine

A suspension OF 3-BROMO-8-METHOXYIMIDAZO [1, 2-A] PYRAZINE (1. 6 g, 7 mmol) in hydrogen bromide (30 wt % in acetic acid, 15 ml) was heated at 80C for 90 min. The reaction was cooled, diluted with water (75 ml) then neutralised with solid sodium hydrogencarbonate. The resulting solid was collected by filtration, washed with water then dried under vacuum to afford 3-BROMO-7H-IMIDAZO [1, 2- A] PYRAZIN-8-ONE as a white powder:

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Electric Literature of 98-97-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 98-97-5 name is Pyrazine-2-carboxylic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Pyrazine-2-carb aldehyde A round bottom flask was charged with pyrazine carboxylic acid (17.7 g, 140 mMol), methanol (200 mL) and conc. sulphuric acid (2 mL) and the mixture was stirred at reflux for 4 hrs then left to stand overnight. The next day the mixture was refluxed for 2 more hours. The solvent was then evaporated in vacuo, the residue was diluted with dichloromethane and neutralised with 20% sodium bicarbonate solution. The dichloromethane phase was dried over MgS04 and evaporated to give the crude product as an off-white solid. Purification by column chromatography (silica gel, dichloromethane) gave pyrazinecarboxylic acid methyl ester 13.5 g as a white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Pyrazine-2-carboxylic acid, and friends who are interested can also refer to it.

Synthetic Route of 54013-07-9, These common heterocyclic compound, 54013-07-9, name is 5-Methoxypyrazin-2-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 12 Synthesis of N-(5-methoxypyrazin-2-yl)-4-(3-{[5-(trifluoromethyl)pyridin-2-yl]oxy}benzylidene)piperidine-1-carboxamide A solution of 2-(3-piperidin-4-ylidenemethyl-phenoxy)-5-trifluoromethyl-pyridine hydrochloride (0.371 g, 1.00 mmol) (from Example 1, Step 5) and phenyl 5-methoxypyrazin-2-ylcarbamate (0.254 g, 1.2 mmol, prepared according to the procedure described in Synthesis, 1997, 1189-1194 from 2-amino-5-methoxypyrazine) in DMSO (2.5 mL) was treated with diisopropylethylamine (0.155 g, 1.2 mmol) and was heated to 60 C. After 4 h, the reaction mixture was partitioned between water and ethyl acetate. The organic layer was separated and the aqueous layer was extracted again with ethyl acetate. The combined organic layer was washed with brine and dried over sodium sulfate, filtered and concentrated to a white solid. Trituration with diethyl ether provided the title compound as a white solid (365 mg, 75%). MS (APCI 10V) AP+ 486.25; 1H NMR (400 MHz, DMSO-d6) delta ppm 2.32 (t, J=5.46 Hz, 2H) 2.44 (t, J=5.46 Hz, 2H) 3.47 (t, J=5.46 Hz, 2H) 3.54 (t, J=5.46 Hz, 2H) 3.83 (s, 3H) 6.37 (s, 1H) 7.02-7.05 (m, 2H) 7.11 (d, J=7.8 Hz, 1H) 7.21 (d, J=8.57 Hz, 1H) 7.39 (dt, J=7.6 Hz, 2 Hz, 1H) 7.99 (d, J=1.6 Hz, 1H) 8.21 (dd, J=9.2 Hz, 2.7 Hz, 1H) 8.53 (m, 2H) 9.18 (s, 1H).

The synthetic route of 54013-07-9 has been constantly updated, and we look forward to future research findings.

Application of 19745-07-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 19745-07-4 name is 2,5-Dichloropyrazine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Tris(dibenzylideneacetone)dipalladium(0) (0.123 g, 0.134 mmol), xantphos (0.300 g, 0.503 mmol), potassium carbonate (1 .18 g, 8.39 mmol) and 2-hydroxy-4-methoxy-3-m ethyl- 1 ,2- dihydropyrrol-5-one (0.480 g, 3.36 mmol) were stirred in 1 ,4-dioxane (20 mL), and the 2,5- dichloropyrazine (B, 0.500 g, 3.36 mmol) was added, the purple-red mixture then being warmed to around 80°C with stirring under a nitrogen atmosphere. After 5hr the mixture was cooled, then – – diluted with EtOAc (20ml) and water (10ml) and filtered through celite, washing through with further small portions of EtOAc and water. The organic phase was separated, the aqueous being further extracted with EtOAc (15ml). The organic extracts were combined, washed with water (10ml), dried over MgSO^ and filtered, and the filtrate adsorbed onto silica for chromatography to give a pale cream powder, 627mg (73percent).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,5-Dichloropyrazine, and friends who are interested can also refer to it.

Application of 14508-49-7, A common heterocyclic compound, 14508-49-7, name is 2-Chloropyrazine, molecular formula is C4H3ClN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

20.0 g (174.6 mmol) of chloropyrazine are added dropwise to 61.7 g (1.2 mol) of hydrazine hydrate, and the mixture is stirred at 120 C. for 45 min. The mixture is then allowed to stand at 2 C. for 24 h. The solid is filtered off and washed twice with petroleum ether. The solid is initially air-dried and then dried under high vacuum. The solid is then recrystallized from toluene and again dried under high vacuum.Yield: 6.5 g (34% of theory)LC-MS (Method 1): Rt=0.41 min; MS (ESIpos): m/z=111 [M+H]+.

The synthetic route of 14508-49-7 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 25710-18-3, name is 2,3-Dichloropyrido[2,3-b]pyrazine, belongs to pyrazines compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 25710-18-3, Recommanded Product: 2,3-Dichloropyrido[2,3-b]pyrazine

2,3-Dichloropyrido[2,3-b]pyrazine (step 2) (500 mg, 2.5 mmol) in dry dioxane (10ml), under nitrogen was treated with phenylboronic acid (305 mg, 2.5 mmol), potassium carbonate (691 mg, 5 mmol) in water (0.5 ml) and tetrakis(triphenylphosphine)palladium(0) (144 mg, 0.125 mmol). The resulting mixture was heated using microwave radiation at 100°C for 1 hour.After cooling to RT, the mixture was diluted with water (100 ml) and extracted with DCM (x3). The combined organic extracts were washed with brine, dried over MgS04 and filtered. The solvent was removed in vacuo and the crude product was purified by chromatography on silica eluting with 0-30percent EtOAc/iso-hexane to afford the title compound as a solid;LCMS: Rt 1 .03 mins MS m/z 242/244 [M+H]+; Method 2minl_C_v0031 H NMR (400MHz, DMSO-d6) delta 9.2 (1 H, m), 8.6 (1 H, dd), 8.0 (1 H, m), 7.9 (2H, m), 7.6 (3H, m)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.